This patch enables the NAND device on the AM3517 Craneboard.
MTD partitions are created as below.
0x000000000000-0x000000080000 : "X-Loader"
0x000000080000-0x000000240000 : "U-Boot"
0x000000240000-0x000000280000 : "U-Boot Env"
0x000000280000-0x000000780000 : "Kernel"
0x000000780000-0x000010000000 : "File System"
Signed-off-by: Milo(Woogyom) Kim <milo.kim@xxxxxx>
---
arch/arm/mach-omap2/board-am3517crane.c | 38 +++++++++++++++++++++++++++++++
1 file changed, 38 insertions(+)
diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c
index 51b96a1..37646e5 100644
--- a/arch/arm/mach-omap2/board-am3517crane.c
+++ b/arch/arm/mach-omap2/board-am3517crane.c
@@ -20,12 +20,17 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/gpio.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include "common.h"
+#include "common-board-devices.h"
+#include "board-flash.h"
#include "am35xx-emac.h"
#include "mux.h"
@@ -51,6 +56,36 @@ static struct usbhs_omap_board_data usbhs_bdata __initdata = {
.reset_gpio_port[2] = -EINVAL
};
+static struct mtd_partition crane_nand_partitions[] = {
+ {
+ .name = "X-Loader",
+ .offset = 0,
+ .size = 4 * NAND_BLOCK_SIZE,
+ .mask_flags = MTD_WRITEABLE,
+ },
+ {
+ .name = "U-Boot",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 14 * NAND_BLOCK_SIZE,
+ .mask_flags = MTD_WRITEABLE,
+ },
+ {
+ .name = "U-Boot Env",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 2 * NAND_BLOCK_SIZE,
+ },
+ {
+ .name = "Kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 40 * NAND_BLOCK_SIZE,
+ },
+ {
+ .name = "File System",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
static void __init am3517_crane_init(void)
{
int ret;
@@ -58,6 +93,9 @@ static void __init am3517_crane_init(void)
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap_serial_init();
omap_sdrc_init(NULL, NULL);
+ board_nand_init(crane_nand_partitions,
+ ARRAY_SIZE(crane_nand_partitions), 0,
+ NAND_BUSWIDTH_16, NULL);
/* Configure GPIO for EHCI port */
if (omap_mux_init_gpio(GPIO_USB_NRESET, OMAP_PIN_OUTPUT)) {
--
1.7.9.5
Best Regards,
Milo
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
