On Mon, Nov 26, 2012 at 04:07:38PM -0500, Alan Stern wrote: > On Mon, 26 Nov 2012, Greg KH wrote: > > > Ah, here's the root of your problem, right? You need a way for your > > hardware to tell the kernel that you have a regulator attached to a > > specific device? Using the device path and hard-coding it into the > > kernel is not the proper way to solve this, sorry. Use some other > > unique way to describe the hardware, surely the hardware designers > > couldn't have been that foolish not to provide this [1]? > > As far as I know, the kernel has no other way to describe devices. > > What about using partial matches? In this example, instead of doing a > wildcard match against > > /platform/usbhs_omap/ehci-omap.0/usb* > > (which would fail if the "platform" part of the path changes), suppose > the string "ehci-omap.0/usb*" could be associated with the usbhs_omap > component somehow. Or even better, the string "usb*" could be > associated with the ehci-omap.0 device. Yes, all you really care about here is the ehci-omap.0 device, so why even search for this, you "know" where the device is, you just created it :) > Then the path-matching code could restrict its attention to that part > of the path and to devices below the specified one. Naming changes > wouldn't be an issue, because the changes themselves would be made in > the same source file that contains the partial path string. > > > On the other hand, this may be way more general than we really need. > For this particular case, all we need to do is take special action the > first time any device is registered below the ehci-omap.0 platform > device. There ought to be a more direct way to accomplish this, > without using string pattern-matching or sysfs pathnames (and without > adding overhead every time a device is added or deleted). > > I don't know if such an approach would be sufficiently general for > future requirements, but it would solve the problem at hand. And given that this is a very specific problem, and the changes are only needed for one piece of problem hardware, I suggest keeping the existing code that implements it. It's smaller, more specific to the exact platform, and we don't end up getting stuck with device paths to describe hardware that might change in the future in ways we do not anticipate (i.e. the platform change.) thanks, greg k-h -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
