Re: [PATCH 3/3] pwm: New driver to support PWM driven LEDs on TWL4030/6030 series of PMICs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Nov 8, 2012 at 9:34 AM, Péter Ujfalusi <peter.ujfalusi@xxxxxx> wrote:
> On 11/07/2012 07:12 PM, Grazvydas Ignotas wrote:
>>> +static int twl4030_pwmled_config(struct pwm_chip *chip, struct pwm_device *pwm,
>>> +                             int duty_ns, int period_ns)
>>> +{
>>> +       int duty_cycle = (duty_ns * TWL4030_LED_MAX) / period_ns;
>>> +       u8 on_time;
>>> +       u8 pwm_config[2];
>>> +       int base, ret;
>>> +
>>> +       if (duty_cycle >= TWL4030_LED_MAX)
>>> +               on_time = TWL4030_LED_MAX;
>>> +       else if (!duty_cycle)
>>> +               on_time = TWL4030_LED_MAX - 1;
>>> +       else
>>> +               on_time = TWL4030_LED_MAX - duty_cycle;
>>> +
>>> +       base = pwm->hwpwm * 2 + TWL4030_PWMA_REG;
>>> +
>>> +       pwm_config[0] = on_time;
>>> +       pwm_config[1] = TWL4030_LED_MAX;
>>> +
>>> +       ret = twl_i2c_write(TWL4030_MODULE_LED, pwm_config, base, 2);
>>
>> Shouldn't this use TWL4030_MODULE_PWMA and TWL4030_MODULE_PWMB as
>> first argument? I can guess it works your way too, but
>> TWL4030_MODULE_PWMx would match the TRM better.
>
> I don't have strong opinion regarding to this. You mean changing from:
>
> base = pwm->hwpwm * 2 + TWL4030_PWMA_REG;
> ret = twl_i2c_write(TWL4030_MODULE_LED, pwm_config, base, 2);
>
> to:
>
> if (pwm->hwpwm)
>         module = TWL4030_MODULE_PWMB;
> else
>         module = TWL4030_MODULE_PWMA;
> ret = twl_i2c_write(module, pwm_config, 0, 2);
>
> But I want to note that I'm currently trying to clean up the mess around
> twl-core. In my view we have quite a bit of redundancy in there. The PWM A/B
> is for driving the LED A/B outputs. We should have only these modules for
> PWM/LED in twl-core:
> TWL_MODULE_PWM - offset for PWM0ON register in twl4030 and PWM1ON for twl6030
> TWL_MODULE_LED - offset for LEDEN register in twl4030 and LED_PWM_CTRL1
>                  for twl6030
>
> From here the driver can figure out what to do IMHO.
>
> There's no need to have separate TWL 'modules' for:
> TWL4030_BASEADD_PWM0
> TWL4030_BASEADD_PWM1
> TWL4030_BASEADD_PWMA
> TWL4030_BASEADD_PWMB

Well all these seem to come from TRM, no hard feelings here too but if
you are going to remove them, probably worth adding a comment.

-- 
Gražvydas
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux