RE: [PATCH 08/15] ARM: OMAP2+: hwmod: Fix the omap_hwmod_addr_space for CPGMAC0

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Benoit,

On Tue, Nov 06, 2012 at 19:20:46, Cousson, Benoit wrote:
> Hi Vaibhav & Vaibhav,
> 
> On 11/06/2012 02:46 PM, Bedia, Vaibhav wrote:
> > On Tue, Nov 06, 2012 at 18:38:08, Hiremath, Vaibhav wrote:
> >> On Tue, Nov 06, 2012 at 15:39:14, Bedia, Vaibhav wrote:
> >>> On Tue, Nov 06, 2012 at 14:59:45, Hiremath, Vaibhav wrote:
> >>> [...]
> >>>>>
> >>>>> Ok I checked this one. The change I made was indirectly fixing another
> >>>>> issue with the AM33xx hwmod data. am33xx_cpgmac0_addr_space[] has two
> >>>>> entries and the SYSC register is part of the second entry. The function
> >>>>> _find_mpu_rt_addr_space in omap_hwmod.c looks for the first entry with
> >>>>> the flag ADDR_TYPE_RT flag. The change I made indirectly made the second
> >>>>> entry in am33xx_cpgmac0_addr_space[] become the first memory space with
> >>>>> the ADDR_TYPE_RT flag. Due to this the hwmod code wrote to the correct
> >>>>> SYSC address of CPGMAC0 and the IP went to standby during bootup. 
> >>>>> After changing the order of the entries in am33xx_cpgmac0_addr_space[]
> >>>>> things work fine.
> >>>>>
> >>>>
> >>>> Good catch.
> >>>>
> >>>> Just a side note on this, driver expects the addresses in this order
> >>>> only, first SS and then WR.
> >>>>
> >>>
> >>> Sorry I didn't understand your comment. For HWMOD code to work as expected,
> >>> we need to change the order. 
> >>
> >> Why do you want to change the order? Just specify "ADDR_TYPE_RT", that 
> >> should be it.
> >>
> > 
> > The problem is that the memory space without the SYSC comes first and is labeled
> > as ADDR_TYPE_RT. I think this is not correct and hence either we change the order
> > or remove the flag from the first entry. If we do the latter then taking the logic
> > of putting in the flag only for memory spaces with SYSC further we need to fixup
> > the entries for ephrpwm0/1/2 and ecap0/1/2.
> 
> The order should not matter, just use ADDR_TYPE_RT for the relevant
> entry. I have a patch ongoing to remove this flag for the non-SYSC entry
> to avoid this kind of confusion.
> The name should probably be changed as well to reflect that at some point.
> Since these entries will be removed anyway with pure DT boot, that
> should be a temporary issue.
> 

Thanks for the clarification. I'll make the change accordingly.

Regards,
Vaibhav
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux