Cc: Tony Lindgren, Afzal Mohammed,
On 11/06/12 12:51, Matthieu CASTET wrote:
> This allow to clean the omap nand driver that were trying in x8 and x16 bits mode.
>
> This also make work onfi detection on beagleboard :
>
> Before :
> [ 1.954803] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xba (Micron NAND 256MiB 1,8V 16-bit), page size: 2048, OOB size: 64
>
> After :
> [ 1.914825] ONFI param page 0 valid
> [ 1.919158] ONFI flash detected
> [ 1.922515] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xba (Micron MT29F2G16ABD), page size: 2048, OOB size: 64
>
> platform data devsize is renamed bussize. It now indicate the maximun size of the nand bus.
>
> Signed-off-by: Matthieu CASTET <matthieu.castet@xxxxxxxxxx>
I think, you should base on one of Tony's branches with that kind of patches.
Because, for example the omap_nand_flash_init() function does not exist anymore
in Tony's master and may be several more things will need to have adjustments.
Also, the GPMC related stuff inside the NAND driver
should probably be coordinated with Afzal, as he is reworking the whole
GPMC related code.
> ---
> arch/arm/mach-omap2/board-3630sdp.c | 2 +-
> arch/arm/mach-omap2/board-devkit8000.c | 2 +-
> arch/arm/mach-omap2/board-flash.c | 8 ++---
> arch/arm/mach-omap2/board-igep0020.c | 2 +-
> arch/arm/mach-omap2/board-omap3beagle.c | 2 +-
> arch/arm/mach-omap2/board-omap3evm.c | 2 +-
> arch/arm/mach-omap2/board-omap3pandora.c | 2 +-
> arch/arm/mach-omap2/board-omap3touchbook.c | 2 +-
> arch/arm/mach-omap2/board-zoom.c | 2 +-
> arch/arm/mach-omap2/common-board-devices.c | 2 +-
> arch/arm/mach-omap2/gpmc-nand.c | 5 ---
> drivers/mtd/nand/omap2.c | 42 ++++++++++++++------------
> include/linux/platform_data/mtd-nand-omap2.h | 7 ++++-
> 13 files changed, 42 insertions(+), 38 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c
> index fc224ad..d7b981b 100644
> --- a/arch/arm/mach-omap2/board-3630sdp.c
> +++ b/arch/arm/mach-omap2/board-3630sdp.c
> @@ -198,7 +198,7 @@ static void __init omap_sdp_init(void)
> h8mbx00u0mer0em_sdrc_params);
> zoom_display_init();
> board_smc91x_init();
> - board_flash_init(sdp_flash_partitions, chip_sel_sdp, NAND_BUSWIDTH_16);
> + board_flash_init(sdp_flash_partitions, chip_sel_sdp, NAND_OMAP_BUS_16);
> enable_board_wakeup_source();
> usbhs_init(&usbhs_bdata);
> }
> diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
> index 1fd161e..b3487e1 100644
> --- a/arch/arm/mach-omap2/board-devkit8000.c
> +++ b/arch/arm/mach-omap2/board-devkit8000.c
> @@ -621,7 +621,7 @@ static void __init devkit8000_init(void)
>
> usb_musb_init(NULL);
> usbhs_init(&usbhs_bdata);
> - omap_nand_flash_init(NAND_BUSWIDTH_16, devkit8000_nand_partitions,
> + omap_nand_flash_init(NAND_OMAP_BUS_16, devkit8000_nand_partitions,
> ARRAY_SIZE(devkit8000_nand_partitions));
> omap_twl4030_audio_init("omap3beagle");
>
> diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c
> index 0cabe61..488a1fa 100644
> --- a/arch/arm/mach-omap2/board-flash.c
> +++ b/arch/arm/mach-omap2/board-flash.c
> @@ -133,12 +133,12 @@ static struct omap_nand_platform_data board_nand_data = {
>
> void
> __init board_nand_init(struct mtd_partition *nand_parts,
> - u8 nr_parts, u8 cs, int nand_type)
> + u8 nr_parts, u8 cs, int bus_type)
> {
> board_nand_data.cs = cs;
> board_nand_data.parts = nand_parts;
> board_nand_data.nr_parts = nr_parts;
> - board_nand_data.devsize = nand_type;
> + board_nand_data.bussize = bus_type;
>
> board_nand_data.ecc_opt = OMAP_ECC_HAMMING_CODE_DEFAULT;
> gpmc_nand_init(&board_nand_data);
> @@ -185,7 +185,7 @@ unmap:
> * @return - void.
> */
> void __init board_flash_init(struct flash_partitions partition_info[],
> - char chip_sel_board[][GPMC_CS_NUM], int nand_type)
> + char chip_sel_board[][GPMC_CS_NUM], int bus_type)
> {
> u8 cs = 0;
> u8 norcs = GPMC_CS_NUM + 1;
> @@ -238,5 +238,5 @@ void __init board_flash_init(struct flash_partitions partition_info[],
> pr_err("NAND: Unable to find configuration in GPMC\n");
> else
> board_nand_init(partition_info[2].parts,
> - partition_info[2].nr_parts, nandcs, nand_type);
> + partition_info[2].nr_parts, nandcs, bus_type);
> }
> diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
> index 48d5e41..732f183 100644
> --- a/arch/arm/mach-omap2/board-igep0020.c
> +++ b/arch/arm/mach-omap2/board-igep0020.c
> @@ -175,7 +175,7 @@ static void __init igep_flash_init(void)
> pr_info("IGEP: initializing NAND memory device\n");
> board_nand_init(igep_flash_partitions,
> ARRAY_SIZE(igep_flash_partitions),
> - 0, NAND_BUSWIDTH_16);
> + 0, NAND_OMAP_BUS_16);
> } else if (mux == IGEP_SYSBOOT_ONENAND) {
> pr_info("IGEP: initializing OneNAND memory device\n");
> board_onenand_init(igep_flash_partitions,
> diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
> index a08bebc..152b659 100644
> --- a/arch/arm/mach-omap2/board-omap3beagle.c
> +++ b/arch/arm/mach-omap2/board-omap3beagle.c
> @@ -512,7 +512,7 @@ static void __init omap3_beagle_init(void)
>
> usb_musb_init(NULL);
> usbhs_init(&usbhs_bdata);
> - omap_nand_flash_init(NAND_BUSWIDTH_16, omap3beagle_nand_partitions,
> + omap_nand_flash_init(NAND_OMAP_BUS_16, omap3beagle_nand_partitions,
> ARRAY_SIZE(omap3beagle_nand_partitions));
> omap_twl4030_audio_init("omap3beagle");
>
> diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
> index a3959de..830e71b 100644
> --- a/arch/arm/mach-omap2/board-omap3evm.c
> +++ b/arch/arm/mach-omap2/board-omap3evm.c
> @@ -732,7 +732,7 @@ static void __init omap3_evm_init(void)
> }
> usb_musb_init(&musb_board_data);
> usbhs_init(&usbhs_bdata);
> - omap_nand_flash_init(NAND_BUSWIDTH_16, omap3evm_nand_partitions,
> + omap_nand_flash_init(NAND_OMAP_BUS_16, omap3evm_nand_partitions,
> ARRAY_SIZE(omap3evm_nand_partitions));
>
> omap_ads7846_init(1, OMAP3_EVM_TS_GPIO, 310, NULL);
> diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
> index 00a1f4a..592fa5d 100644
> --- a/arch/arm/mach-omap2/board-omap3pandora.c
> +++ b/arch/arm/mach-omap2/board-omap3pandora.c
> @@ -82,7 +82,7 @@ static struct mtd_partition omap3pandora_nand_partitions[] = {
>
> static struct omap_nand_platform_data pandora_nand_data = {
> .cs = 0,
> - .devsize = NAND_BUSWIDTH_16,
> + .bussize = NAND_OMAP_BUS_16,
> .xfer_type = NAND_OMAP_PREFETCH_DMA,
> .parts = omap3pandora_nand_partitions,
> .nr_parts = ARRAY_SIZE(omap3pandora_nand_partitions),
> diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
> index 944ffc4..7cef1e3 100644
> --- a/arch/arm/mach-omap2/board-omap3touchbook.c
> +++ b/arch/arm/mach-omap2/board-omap3touchbook.c
> @@ -365,7 +365,7 @@ static void __init omap3_touchbook_init(void)
> omap_ads7846_init(4, OMAP3_TS_GPIO, 310, &ads7846_pdata);
> usb_musb_init(NULL);
> usbhs_init(&usbhs_bdata);
> - omap_nand_flash_init(NAND_BUSWIDTH_16, omap3touchbook_nand_partitions,
> + omap_nand_flash_init(NAND_OMAP_BUS_16, omap3touchbook_nand_partitions,
> ARRAY_SIZE(omap3touchbook_nand_partitions));
>
> /* Ensure SDRC pins are mux'd for self-refresh */
> diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c
> index 4994438..49349e7 100644
> --- a/arch/arm/mach-omap2/board-zoom.c
> +++ b/arch/arm/mach-omap2/board-zoom.c
> @@ -114,7 +114,7 @@ static void __init omap_zoom_init(void)
> }
>
> board_nand_init(zoom_nand_partitions, ARRAY_SIZE(zoom_nand_partitions),
> - ZOOM_NAND_CS, NAND_BUSWIDTH_16);
> + ZOOM_NAND_CS, NAND_OMAP_BUS_16);
> zoom_debugboard_init();
> zoom_peripherals_init();
>
> diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c
> index 48daac2..2189f40 100644
> --- a/arch/arm/mach-omap2/common-board-devices.c
> +++ b/arch/arm/mach-omap2/common-board-devices.c
> @@ -128,7 +128,7 @@ void __init omap_nand_flash_init(int options, struct mtd_partition *parts,
> nand_data.cs = nandcs;
> nand_data.parts = parts;
> nand_data.nr_parts = nr_parts;
> - nand_data.devsize = options;
> + nand_data.bussize = options;
>
> printk(KERN_INFO "Registering NAND on CS%d\n", nandcs);
> if (gpmc_nand_init(&nand_data) < 0)
> diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c
> index 4acf497..94f622e 100644
> --- a/arch/arm/mach-omap2/gpmc-nand.c
> +++ b/arch/arm/mach-omap2/gpmc-nand.c
> @@ -76,11 +76,6 @@ static int omap2_nand_gpmc_retime(struct omap_nand_platform_data *gpmc_nand_data
> t.cs_wr_off = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->cs_wr_off);
> t.wr_cycle = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->wr_cycle);
>
> - /* Configure GPMC */
> - if (gpmc_nand_data->devsize == NAND_BUSWIDTH_16)
> - gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_DEV_SIZE, 1);
> - else
> - gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_DEV_SIZE, 0);
> gpmc_cs_configure(gpmc_nand_data->cs,
> GPMC_CONFIG_DEV_TYPE, GPMC_DEVICETYPE_NAND);
> gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_WP, 0);
> diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
> index 5b31386..618cf42 100644
> --- a/drivers/mtd/nand/omap2.c
> +++ b/drivers/mtd/nand/omap2.c
> @@ -1273,7 +1273,7 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)
> info->mtd.name = dev_name(&pdev->dev);
> info->mtd.owner = THIS_MODULE;
>
> - info->nand.options = pdata->devsize;
> + info->nand.options = NAND_BUSWIDTH_AUTO;
> info->nand.options |= NAND_SKIP_BBTSCAN;
>
> res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> @@ -1325,13 +1325,8 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)
> break;
>
> case NAND_OMAP_POLLED:
> - if (info->nand.options & NAND_BUSWIDTH_16) {
> - info->nand.read_buf = omap_read_buf16;
> - info->nand.write_buf = omap_write_buf16;
> - } else {
> - info->nand.read_buf = omap_read_buf8;
> - info->nand.write_buf = omap_write_buf8;
> - }
> + info->nand.read_buf = omap_read_buf8;
> + info->nand.write_buf = omap_write_buf8;
> break;
>
> case NAND_OMAP_PREFETCH_DMA:
> @@ -1407,6 +1402,26 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)
> goto out_release_mem_region;
> }
>
> + gpmc_cs_configure(info->gpmc_cs, GPMC_CONFIG_DEV_SIZE, 0);
> + if (nand_scan_ident(&info->mtd, 1, NULL)) {
> + err = -ENXIO;
> + goto out_release_mem_region;
> + }
> +
> + /* update for 16 bits device */
> + if (info->nand.options & NAND_BUSWIDTH_16) {
> + if (!(pdata->bussize & NAND_OMAP_BUS_16)) {
> + dev_err(&pdev->dev, "detected x16 flash, but board only support x8 flash\n");
> + err = -ENXIO;
> + goto out_release_mem_region;
> + }
> + gpmc_cs_configure(info->gpmc_cs, GPMC_CONFIG_DEV_SIZE, 1);
> + if (pdata->xfer_type == NAND_OMAP_POLLED) {
> + info->nand.read_buf = omap_read_buf16;
> + info->nand.write_buf = omap_write_buf16;
> + }
> + }
> +
> /* select the ecc type */
> if (pdata->ecc_opt == OMAP_ECC_HAMMING_CODE_DEFAULT)
> info->nand.ecc.mode = NAND_ECC_SOFT;
> @@ -1428,17 +1443,6 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)
> }
> }
>
> - /* DIP switches on some boards change between 8 and 16 bit
> - * bus widths for flash. Try the other width if the first try fails.
> - */
> - if (nand_scan_ident(&info->mtd, 1, NULL)) {
> - info->nand.options ^= NAND_BUSWIDTH_16;
> - if (nand_scan_ident(&info->mtd, 1, NULL)) {
> - err = -ENXIO;
> - goto out_release_mem_region;
> - }
> - }
> -
> /* rom code layout */
> if (pdata->ecc_opt == OMAP_ECC_HAMMING_CODE_HW_ROMCODE) {
>
> diff --git a/include/linux/platform_data/mtd-nand-omap2.h b/include/linux/platform_data/mtd-nand-omap2.h
> index 1a68c1e..766815e 100644
> --- a/include/linux/platform_data/mtd-nand-omap2.h
> +++ b/include/linux/platform_data/mtd-nand-omap2.h
> @@ -18,6 +18,11 @@ enum nand_io {
> NAND_OMAP_PREFETCH_IRQ /* prefetch enabled irq mode */
> };
>
> +enum nand_bussize {
> + NAND_OMAP_BUS_8,
> + NAND_OMAP_BUS_16,
> +};
> +
> struct omap_nand_platform_data {
> int cs;
> struct mtd_partition *parts;
> @@ -25,7 +30,7 @@ struct omap_nand_platform_data {
> int nr_parts;
> bool dev_ready;
> enum nand_io xfer_type;
> - int devsize;
> + enum nand_bussize bussize;
> enum omap_ecc ecc_opt;
> struct gpmc_nand_regs reg;
> };
--
Regards,
Igor.
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
