Add device tree date for GPIO based various drivers matrix keypad, volume keys, push buttons and use leds accross three AM33XX devices viz EVM, BeagleBone and Starter Kit. To make it functional this series also adds pinctrl data for all the GPIOs used by various drivers. In this series only default state pinmux/conf settings are added because of sleep/idle state pinctrl values are not available. These patches are based on linux-omap-dt:for_3.8/dts tree and these were tested on am33xx devices according to added functionality. AnilKumar Ch (10): ARM: dts: AM33XX: Add pinmux configuration for matrix keypad to EVM ARM: dts: AM33XX: Add matrix keypad device tree data to am335x-evm ARM: dts: AM33XX: Add pinmux configuration for volume-keys to EVM ARM: dts: AM33XX: Add volume-keys device tree data to am335x-evm ARM: dts: AM33XX: Add pinmux configuration for user-leds to BONE ARM: dts: AM33XX: Add user-leds device tree data to am335x-bone ARM: dts: AM33XX: Add pinmux configuration for gpio-leds to EVMSK ARM: dts: AM33XX: Add user-leds device tree data to am335x-evmsk ARM: dts: AM33XX: Add pinmux configuration for gpio-keys to EVMSK ARM: dts: AM33XX: Add push-buttons device tree data to am335x-evmsk arch/arm/boot/dts/am335x-bone.dts | 44 +++++++++++++++++++ arch/arm/boot/dts/am335x-evm.dts | 63 +++++++++++++++++++++++++++ arch/arm/boot/dts/am335x-evmsk.dts | 84 ++++++++++++++++++++++++++++++++++++ 3 files changed, 191 insertions(+) -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
