From: Ajay Kumar Gupta <ajay.gupta@xxxxxx> Device tree node for usbss on AM33XX. There are two musb controllers on am33xx platform so have port0-mode and port1-mode data. [afzal@xxxxxx: reg & interrupt property addition] Signed-off-by: Ajay Kumar Gupta <ajay.gupta@xxxxxx> Signed-off-by: Santhapuri, Damodar <damodar.santhapuri@xxxxxx> Signed-off-by: Ravi Babu <ravibabu@xxxxxx> Signed-off-by: Afzal Mohammed <afzal@xxxxxx> --- Hi Benoit, This is based on your "for_3.8/dts" branch. This is made on top of "usb: musb: am335x support" (http://marc.info/?l=linux-omap&m=135187391904863&w=2) and has been tested on Beagle Bone. Regards Afzal arch/arm/boot/dts/am33xx.dtsi | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 5dfd682..78340a5 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -321,5 +321,22 @@ ti,hwmods = "spi1"; status = "disabled"; }; + + usb_otg_hs@47400000 { + compatible = "ti,musb-am33xx"; + reg = <0x47400000 0x1000 /* usbss */ + 0x47401000 0x800 /* musb instance 0 */ + 0x47401800 0x800>; /* musb instance 1 */ + interrupts = <17 /* usbss */ + 18 /* musb instance 0 */ + 19>; /* musb instance 1 */ + multipoint = <1>; + num-eps = <16>; + ram-bits = <12>; + port0-mode = <3>; + port1-mode = <3>; + power = <250>; + ti,hwmods = "usb_otg_hs"; + }; }; }; -- 1.7.12 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html