Re: [PATCH] ARM: OMAP2+: AM33XX: clock data: fix mcasp entries

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Gururaja,


On Wed, Oct 31, 2012 at 12:39 AM, Hebbar, Gururaja
<gururaja.hebbar@xxxxxx> wrote:
> On Wed, Oct 31, 2012 at 01:58:32, Joel A Fernandes wrote:
>> Hi Gururaja,
>>
>> On Mon, Oct 29, 2012 at 10:45 AM, Hebbar, Gururaja
>> <gururaja.hebbar@xxxxxx> wrote:
>> > Matt,
>> >
>> > On Wed, Oct 10, 2012 at 20:00:49, Porter, Matt wrote:
>> >> 6ea74cb ARM: OMAP2+: hwmod: get rid of all omap_clk_get_by_name usage
>> >> exposes a bug in the AM33XX clock data for mcasp. After moving to
>> >> clk_get() usage, the _init() of all registered hwmods fails on mcasp0
>> >> due to incorrect clock data causing clk_get() to fail. This causes all
>> >> successive hwmods to fail to _init() leaving them in a bad state.
>> >>
>> >> This patch updates the mcasp clock entries so clk_get() will succeed.
>> >> It is tested on BeagleBone and is needed for 3.7-rc1 to fix AM33xx
>> >> boot.
>> >
>> >
>> > I want to test Audio on AM335x Evm with your EDMA patches. I have few
>> > patches for AM335x.
>> > Can you share the link to the repo & branch on which I need to rebase?
>> > The patches are related to mcasp dt node, mcasp pinmux in dt, etc...
>> >
>>
>> I was wondering about the status of following patches you wrote, not
>> added to mainline yet:
>>
>> (1)
>>  ASoC: Davinci: machine: Add device tree binding
>> https://patchwork.kernel.org/patch/1380511/  - will this be resubmitted?
>
> There was no review comments for V3 I submitted.
>
>>
>> (2)
>> ASoC: AM33XX: Add support for AM33xx SoC Audio
>> https://github.com/joelagnel/linux-kernel/commit/973cfb48bdb70018b3869a21595bde8630efb29d
>
> I want to re-submit both the patches along with 2 more patch-set [1]. I am
> waiting for Matt Porters to reply with his recent branch, so that I can do
> a final test and re-submit.
>
> [1].
> arm/dts: Add tlv320aic3x codec DT data to am335x-evm.dts
> arm/dts: add mcasp1 dt node to am335x-evm.dt
> ASoC: davinci-mcasp: Add pinctrl support
> arm/dts: AM33XX: setup pinctrl for mcasp1 on am335x-evm
>

Thanks, I think I have all of your patches now in my tree, I made a
few more changes to make it compile and run for me on 3.7-rc2

beaglebone_defconfig: Add dummy regulator to init tlv320aic3x
https://github.com/joelagnel/linux-kernel/commit/db5672dfe548d82625cf40ed688d05ba7cee5c93

ASoC: davinci-evm: cpu_dai_of_node has changed to cpu_of_node
https://github.com/joelagnel/linux-kernel/commit/8781c69553d0faf7cec0119e593447f27fdc07e9

I don't get a crash anymore (after correcting mcasp0 base address in
dts), but I still don't get any audio output from the codec. I will
probe the audio signals next week to make sure the I2S output is
correct.

Regards,
Joel
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux