On Thursday 25 October 2012 05:55 PM, Felipe Balbi wrote:
just a cleanup patch trying to make exit path
more straightforward. No changes otherwise.
Signed-off-by: Felipe Balbi <balbi@xxxxxx>
---
drivers/i2c/busses/i2c-omap.c | 26 +++++++++++++++++---------
1 file changed, 17 insertions(+), 9 deletions(-)
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index c07d9c4..bea0277 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -505,6 +505,7 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adap,
{
struct omap_i2c_dev *dev = i2c_get_adapdata(adap);
unsigned long timeout;
+ int ret;
You might want to initialize the error value to avoid return 0. Compiler
might be already cribbing for it
u16 w;
dev_dbg(dev->dev, "addr: 0x%04x, len: %d, flags: 0x%x, stop: %d\n",
@@ -582,31 +583,38 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adap,
dev->buf_len = 0;
if (timeout == 0) {
dev_err(dev->dev, "controller timed out\n");
- omap_i2c_init(dev);
- return -ETIMEDOUT;
+ ret = -ETIMEDOUT;
+ goto err_i2c_init;
}
- if (likely(!dev->cmd_err))
- return 0;
-
Have you have drooped this check completely ?
/* We have an error */
if (dev->cmd_err & (OMAP_I2C_STAT_AL | OMAP_I2C_STAT_ROVR |
OMAP_I2C_STAT_XUDF)) {
- omap_i2c_init(dev);
- return -EIO;
+ ret = -EIO;
+ goto err_i2c_init;
}
if (dev->cmd_err & OMAP_I2C_STAT_NACK) {
if (msg->flags & I2C_M_IGNORE_NAK)
return 0;
+
if (stop) {
w = omap_i2c_read_reg(dev, OMAP_I2C_CON_REG);
w |= OMAP_I2C_CON_STP;
omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, w);
}
- return -EREMOTEIO;
+
+ ret = -EREMOTEIO;
+ goto err;
}
- return -EIO;
+
+ return 0;
With initialized value you can use
return ret;
Regards
Santosh
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
