Hi, On Tue, Oct 23, 2012 at 08:57:19PM +0530, Shubhrajyoti D wrote: > re-factor omap_i2c_init() so that we can re-use it for resume. > While at it also remove the bufstate variable as we write it > in omap_i2c_resize_fifo for every transfer. > > Signed-off-by: Shubhrajyoti D <shubhrajyoti@xxxxxx> > --- > Applies on Felipe's series > http://www.spinics.net/lists/linux-omap/msg79995.html > > Tested with Terro sys fix + Felipe's stop sched_clock() during suspend > on omap3636 beagle both idle and suspend. > > Functional testing on omap4sdp. > > drivers/i2c/busses/i2c-omap.c | 68 +++++++++++++++++------------------------ > 1 files changed, 28 insertions(+), 40 deletions(-) > > diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c > index 5e5cefb..338cee7 100644 > --- a/drivers/i2c/busses/i2c-omap.c > +++ b/drivers/i2c/busses/i2c-omap.c > @@ -209,7 +209,6 @@ struct omap_i2c_dev { > u16 pscstate; > u16 scllstate; > u16 sclhstate; > - u16 bufstate; > u16 syscstate; > u16 westate; > u16 errata; > @@ -285,9 +284,26 @@ static inline u16 omap_i2c_read_reg(struct omap_i2c_dev *i2c_dev, int reg) > } > } > > +static void __omap_i2c_init(struct omap_i2c_dev *dev) > +{ > + > + omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0); > + /* Setup clock prescaler to obtain approx 12MHz I2C module clock: */ > + omap_i2c_write_reg(dev, OMAP_I2C_PSC_REG, dev->pscstate); > + > + /* SCL low and high time values */ > + omap_i2c_write_reg(dev, OMAP_I2C_SCLL_REG, dev->scllstate); > + omap_i2c_write_reg(dev, OMAP_I2C_SCLH_REG, dev->sclhstate); > + if (dev->rev >= OMAP_I2C_REV_ON_3430_3530) > + omap_i2c_write_reg(dev, OMAP_I2C_WE_REG, dev->westate); > + /* Take the I2C module out of reset: */ > + omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN); > + omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, dev->iestate); > + > +} > static int omap_i2c_init(struct omap_i2c_dev *dev) > { > - u16 psc = 0, scll = 0, sclh = 0, buf = 0; > + u16 psc = 0, scll = 0, sclh = 0; > u16 fsscll = 0, fssclh = 0, hsscll = 0, hssclh = 0; > unsigned long fclk_rate = 12000000; > unsigned long timeout; > @@ -337,11 +353,8 @@ static int omap_i2c_init(struct omap_i2c_dev *dev) > * REVISIT: Some wkup sources might not be needed. > */ > dev->westate = OMAP_I2C_WE_ALL; > - omap_i2c_write_reg(dev, OMAP_I2C_WE_REG, > - dev->westate); > } > } > - omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0); > > if (dev->flags & OMAP_I2C_FLAG_ALWAYS_ARMXOR_CLK) { > /* > @@ -426,28 +439,18 @@ static int omap_i2c_init(struct omap_i2c_dev *dev) > sclh = fclk_rate / (dev->speed * 2) - 7 + psc; > } > > - /* Setup clock prescaler to obtain approx 12MHz I2C module clock: */ > - omap_i2c_write_reg(dev, OMAP_I2C_PSC_REG, psc); > - > - /* SCL low and high time values */ > - omap_i2c_write_reg(dev, OMAP_I2C_SCLL_REG, scll); > - omap_i2c_write_reg(dev, OMAP_I2C_SCLH_REG, sclh); > - > - /* Take the I2C module out of reset: */ > - omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN); > - > /* Enable interrupts */ > dev->iestate = (OMAP_I2C_IE_XRDY | OMAP_I2C_IE_RRDY | > OMAP_I2C_IE_NACK | OMAP_I2C_IE_AL) | > ((dev->fifo_size) ? (OMAP_I2C_IE_RDR | > OMAP_I2C_IE_XDR) : 0); > - omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, dev->iestate); > - if (dev->flags & OMAP_I2C_FLAG_RESET_REGS_POSTIDLE) { > - dev->pscstate = psc; > - dev->scllstate = scll; > - dev->sclhstate = sclh; > - dev->bufstate = buf; > - } > + > + dev->pscstate = psc; > + dev->scllstate = scll; > + dev->sclhstate = sclh; > + > + __omap_i2c_init(dev); > + > return 0; > } > > @@ -1136,7 +1139,7 @@ omap_i2c_probe(struct platform_device *pdev) > if (IS_ERR_VALUE(r)) > goto err_free_mem; > > - dev->rev = omap_i2c_read_reg(dev, OMAP_I2C_REV_REG) & 0xff; > + dev->rev = omap_i2c_read_reg(dev, OMAP_I2C_REV_REG) & 0xff; trailing change. not part of $SUBJECT > dev->errata = 0; > > @@ -1268,23 +1271,8 @@ static int omap_i2c_runtime_resume(struct device *dev) > { > struct omap_i2c_dev *_dev = dev_get_drvdata(dev); > > - if (_dev->flags & OMAP_I2C_FLAG_RESET_REGS_POSTIDLE) { > - omap_i2c_write_reg(_dev, OMAP_I2C_CON_REG, 0); > - omap_i2c_write_reg(_dev, OMAP_I2C_PSC_REG, _dev->pscstate); > - omap_i2c_write_reg(_dev, OMAP_I2C_SCLL_REG, _dev->scllstate); > - omap_i2c_write_reg(_dev, OMAP_I2C_SCLH_REG, _dev->sclhstate); > - omap_i2c_write_reg(_dev, OMAP_I2C_BUF_REG, _dev->bufstate); > - omap_i2c_write_reg(_dev, OMAP_I2C_SYSC_REG, _dev->syscstate); > - omap_i2c_write_reg(_dev, OMAP_I2C_WE_REG, _dev->westate); > - omap_i2c_write_reg(_dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN); > - } > - > - /* > - * Don't write to this register if the IE state is 0 as it can > - * cause deadlock. > - */ > - if (_dev->iestate) > - omap_i2c_write_reg(_dev, OMAP_I2C_IE_REG, _dev->iestate); this part is not on __omap_i2c_init() so you're potentially causing a regression here. > + if (_dev->flags & OMAP_I2C_FLAG_RESET_REGS_POSTIDLE) > + __omap_i2c_init(_dev); how has this been tested ? Did you validate suspend to ram and runtime pm ? > return 0; > } > -- > 1.7.5.4 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html -- balbi
Attachment:
signature.asc
Description: Digital signature
