Hi Paul, On 10/20/2012 04:26 PM, Paul Walmsley wrote: > > Here are some basic OMAP test results for Linux v3.7-rc2. > Logs and other details at: > > http://www.pwsan.com/omap/testlogs/test_v3.7-rc2/20121020134755/ > > > Passing tests > ------------- > > Boot to userspace: 3517evm, 3530es3beagle, 3730beaglexm, 37xxevm, > 4430es2panda, 5912osk, am335xbone > > PM ret/off, suspend + dynamic idle: (none) > > > Failing tests: fixed by posted patches > -------------------------------------- > > Boot tests: > > * 2430sdp: vfp_reload_hw oops during MMC initialization > - Kernel attempts to save FP registers that don't exist; fix posted: > - http://www.spinics.net/lists/arm-kernel/msg200646.html > > * 2420n800: boot hangs during UART initialization > - http://lkml.org/lkml/2012/9/11/454 > - Apparently fixed by http://marc.info/?l=linux-omap&m=135068547918479&w=2 > > * AM335x Beaglebone: omap2plus_defconfig kernels don't boot > - due to a GPMC bug > - Apparently fixed by http://www.spinics.net/lists/arm-kernel/msg200787.html This is now addressed and I have verified it is booting on v3.7-rc2. The following patch address this boot problem ... http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=8119024ef7363591fd958ec89ebfaee7c18209e3 > Other: > > * 2420N800: powers down 30 seconds after boot > - Presumably due to missing CBUS patches for watchdog control > - http://lkml.org/lkml/2012/9/3/265 > > * 4430es2panda: omap_hwmod: mcpdm: cannot be enabled for reset (3) > - clock source is from an external I2C-controlled source > - must skip reset until the switchover to hwmod late init > - http://www.spinics.net/lists/arm-kernel/msg178138.html > > > Failing tests: needing investigation > ------------------------------------ > > Boot tests: > > * CM-T3517: L3 in-band error with IPSS during boot > - Cause unknown but see http://marc.info/?l=linux-omap&m=134833869730129&w=2 > - Longstanding issue; does not occur on the 3517EVM > > * 3517EVM & CM-T3517: boot hangs with NFS root > - Likely some Kconfig, board file, and PM issues with EMAC > > * CM-T3517: boot hangs with MMC boot > - Due to missing MMC setup in board file > > * 4460pandaes: boot fails early > - Appears to be timer-related I tried v3.7-rc2 on my pandaES and it is booting fine for me. I have an OMAP4460 ES1.1 and u-boot release 2012.10. I don't wish to create more work for you, but it could be good to add silicon revision, u-boot release (if applicable) and toolchain used for any failures. Cheers Jon -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
