On Sat, 20 Oct 2012, Richard Cochran wrote: > On Sat, Oct 20, 2012 at 04:27:19PM +0000, Paul Walmsley wrote: > > > BeagleBone Rev. A6 does not boot v3.7-rc1, at least not for me. > > > I recently posted the missing patches needed to make it work (but the > > > patches are not by me). > > > > Those are the patches at: > > > > http://lists.arm.linux.org.uk/lurker/message/20121015.191630.bdae3c50.en.html > > > > ? > > Yes, that is right. Only the first patch is absoutely required for booting. OK thanks. > > Also are you using omap2plus_defconfig? > > Yes, but I de-selected a few items. I will try it again without > changing anything. Just tried omap2plus_defconfig here and the board didn't boot, confirming your result. Will add a section to the testlog README.txt about that. > > In terms of differences from your setup, looks like we have different > > X-Loader and u-boot; it wouldn't surprise me if we have different kernel > > configs too. > > What is X-Loader? It's the "MLO" file on the SD card. The on-chip ROM code boots that. Then X-Loader boots U-Boot. Am not sure if it should still be called X-Loader - in your log it seems to be identifying itself as "U-Boot SPL" - so maybe that's not the old "X-Loader" code any more. - Paul -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html