hi,
On Thu, Oct 18, 2012 at 03:18:04PM +0300, Tero Kristo wrote:
> > > +static int __init omap4430_phy_power_down(void)
> > > +{
> > > + void __iomem *ctrl_base;
> > > +
> > > + if (!cpu_is_omap44xx())
> > > + return 0;
> > > +
> > > + ctrl_base = ioremap(OMAP443X_SCM_BASE, SZ_1K);
> > > + if (!ctrl_base) {
> > > + pr_err("control module ioremap failed\n");
> > > + return -ENOMEM;
> > > + }
> > > +
> > > + /* Power down the phy */
> > > + __raw_writel(PHY_PD, ctrl_base + CONTROL_DEV_CONF);
> > > +
> > > + iounmap(ctrl_base);
> > > +
> > > + return 0;
> > > +}
> > > +early_initcall(omap4430_phy_power_down);
> > > +#endif
> >
> > I think you could do it even if the driver is enabled.
>
> Actually not at least now, it looks like the driver is not controlling
> this bit at all, so the driver would fail if we do this.
then we can consider that a bug in the driver. Kishon, I thought you had
added SCM address space to PHY driver for this particular reason until
we get SCM driver, wasn't it ??
> > Just to make sure I understand the issue right: is the PHY enabled by
> > default or did bootloader left this enabled ?
>
> The reset value for the register is zero (at least according to TRM), so
> it is enabled from boot. Also, I couldn't find any code from the u-boot
> that would touch this bit with a quick look.
ok, so it looks like we must do this anyway, thanks ;-)
--
balbi
Attachment:
signature.asc
Description: Digital signature
