Re: OMAP baseline test results for v3.7-rc1

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 2012-10-18 at 06:48 +0000, Paul Walmsley wrote:
> On Thu, 18 Oct 2012, Paul Walmsley wrote:
> 
> > Here are some basic OMAP test results for Linux v3.7-rc1.
> > Logs and other details at http://www.pwsan.com/omap/testlogs/test_v3.7-rc1/
> 
> A few additional observations missing from the original message.
> 
> > Failing tests: needing investigation
> > ------------------------------------
> > 
> > Boot tests:
> > 
> > * 2420n800: boot hangs during UART initialization
> >   - http://lkml.org/lkml/2012/9/11/454
> >   - Various attempts at fixes posted; etiology known; issue still unresolved
> > 
> > * CM-T3517: L3 in-band error with IPSS during boot
> >   - Cause unknown but see http://marc.info/?l=linux-omap&m=134833869730129&w=2
> >   - Longstanding issue; does not occur on the 3517EVM
> > 
> > * 3517EVM & CM-T3517: boot hangs with NFS root
> >   - Likely some Kconfig, board file, and PM issues with EMAC
> > 
> > * CM-T3517: boot hangs with MMC boot
> >   - Due to missing MMC setup in board file
> 
> * 4430es2panda: clockevents problems early in boot
>   - boots with dummy_timer
>   - no one-shot mode so no-HZ is likely to fail

I have a fix for this problem, however I am seeing this on omap4460
panda. The root cause seems to be that local timer init for OMAP is
using wrong interrupt number. It adds a wrong offset to the interrupt
(OMAP_INTC_START) which should be omitted. Will send a patch soon along
with a new version of core ret set.

-Tero

> 
> * 4460pandaes: boot fails early
>   - Appears to be timer-related
> 
> > PM tests:
> > 
> > * 3530es3beagle, 37xxevm, 3730beaglexm: I2C fails during resume from suspend
> >   - Causes MMC to become unusable since regulators are not reenabled
> >   - Can be worked around by reverting the I2C driver conversion to
> >     threaded IRQs:
> >     - http://marc.info/?l=linux-i2c&m=135026587102887&w=2
> >   - Appears to be due to an accounting problem; under discussion:
> >     - http://marc.info/?l=linux-arm-kernel&m=135042360725821&w=2
> > 
> > * 3530es3beagle: hangs during off-mode dynamic idle test
> >   - Unknown cause; not investigated
> > 
> > * 37xx EVM: CORE not entering dynamic off-idle
> >   - Cause unknown; dynamic retention-idle seems to work; system suspend to 
> >     off works
> > 
> > * 3730 Beagle XM: does not serial wake from off-idle suspend when console
> >   UART doesn't clock gate ("debug ignore_loglevel")
> >   - Not shown in the current test logs; cause unknown
> 
> * 4430es2panda: dummy_timer warning messages during resume
>   - Unknown cause; not investigated
> 
> 
> - Paul
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel


--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux