From: Jean Pihet <j-pihet@xxxxxx> Remove the device dependent code (ex. cpu_is_xxx()) and settings from the driver code and instead pass them via the platform data. This allows a clean separation of the driver code and the platform code, as required by the move of the platform header files to include/linux/platform_data. Note about the smartreflex functional clocks: the smartreflex fclks are derived from sys_clk and have the same name as the main_clk from the hwmod entry, in order for the SmartReflex driver to request the fclk (using clk_get(dev, "fck")). Based on mainline 3.6.0. Boot tested on OMAP3&4 platforms. Jean Pihet (2): ARM: OMAP: hwmod: align the SmartReflex fck names ARM: OMAP: SmartReflex: pass device dependent data via platform data arch/arm/mach-omap2/clock33xx_data.c | 12 +++---- arch/arm/mach-omap2/clock3xxx_data.c | 12 +++---- arch/arm/mach-omap2/clock44xx_data.c | 6 ++-- arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 8 ++--- arch/arm/mach-omap2/sr_device.c | 13 +++++++ drivers/power/avs/smartreflex.c | 54 +++++++++------------------- include/linux/power/smartreflex.h | 14 ++++++-- 7 files changed, 61 insertions(+), 58 deletions(-) -- 1.7.10.4 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
