Hello, u-boot recently stopped configuring 'non essential' pin mux. This change leaves the audio essential pins in non configured state which prevents the use of audio. The following series makes sure that the needed pins are configured correctly by the kernel on OMAP4 and OMAP5. Tony: can this series queued for 3.7? Regards, Peter --- Peter Ujfalusi (9): ARM: OMAP: board-4430-sdp: Pin mux configuration for audio needs ARM: OMAP: board-omap4panda: Pin mux configuration for audio needs ARM/dts: omap4-panda: Disable unused audio IPs ARM/dts: omap4-sdp: Disable unused McBSP3 ARM/dts: omap5-evm: Disable unused McBSP3 ARM/dts: omap4-sdp: pinmux configuration for audio ARM/dts: omap4-panda: pinmux configuration for audio ARM/dts: Add pinctrl driver entries for omap5 ARM/dts: omap5-evm: pinmux configuration for audio arch/arm/boot/dts/omap4-panda.dts | 47 +++++++++++++++++++++++++++ arch/arm/boot/dts/omap4-sdp.dts | 57 +++++++++++++++++++++++++++++++++ arch/arm/boot/dts/omap5-evm.dts | 58 ++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/omap5.dtsi | 17 ++++++++++ arch/arm/mach-omap2/board-4430sdp.c | 26 +++++++++++++++ arch/arm/mach-omap2/board-omap4panda.c | 15 +++++++++ 6 files changed, 220 insertions(+) -- 1.7.12 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html