On Wed, Oct 3, 2012 at 7:15 PM, Philippe De Swert
<philippe.deswert@xxxxxxxxxxxxxxx> wrote:
> So any comments on the approach here (see patch kept below)? Or should I immediately send it as a new patch to get the comments? I sent it in this thread as it also solves the issue I have.
Patch is fine for me. Not sure if Felipe has some comments.
> BTW: CONFIG_SOC_OMAP3430 could be easily removed as it only changes minor things in the musb stack. It would clean up the code and get rid of this very misleading option as it has nothing to do with any OMAP3430 soc specific handling.
It would be better if some OMAP3430 users can comment on this.
>> From deae78e1084749f340ae8b8aaeca51818d5bfc55 Mon Sep 17 00:00:00 2001
>> From: Philippe De Swert <philippe.deswert@xxxxxxxxxxxxxxx>
>> Date: Wed, 26 Sep 2012 17:00:46 +0300
>> Subject: [PATCH 1/1] musb: Move generic_interrupt out of the way
>>
>> Have all musb drivers define their own isr.
>>
>> Signed-off-by: Philippe De Swert <philippe.deswert@xxxxxxxxxxxxxxx>
>> ---
>> drivers/usb/musb/musb_core.c | 33 ++-------------------------------
>> drivers/usb/musb/omap2430.c | 22 ++++++++++++++++++++++
>> drivers/usb/musb/ux500.c | 21 +++++++++++++++++++++
>> 3 files changed, 45 insertions(+), 31 deletions(-)
>>
>> diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
>> index 26f1bef..1d5ee34 100644
>> --- a/drivers/usb/musb/musb_core.c
>> +++ b/drivers/usb/musb/musb_core.c
>> @@ -1496,35 +1496,6 @@ static int __devinit musb_core_init(u16 musb_type,
>> struct musb *musb)
>> return 0;
>> }
>>
>> -/*-------------------------------------------------------------------------*/
>> -
>> -#if defined(CONFIG_SOC_OMAP2430) || defined(CONFIG_SOC_OMAP3430) || \
>> - defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_ARCH_U8500)
>> -
>> -static irqreturn_t generic_interrupt(int irq, void *__hci)
>> -{
>> - unsigned long flags;
>> - irqreturn_t retval = IRQ_NONE;
>> - struct musb *musb = __hci;
>> -
>> - spin_lock_irqsave(&musb->lock, flags);
>> -
>> - musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB);
>> - musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX);
>> - musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX);
>> -
>> - if (musb->int_usb || musb->int_tx || musb->int_rx)
>> - retval = musb_interrupt(musb);
>> -
>> - spin_unlock_irqrestore(&musb->lock, flags);
>> -
>> - return retval;
>> -}
>> -
>> -#else
>> -#define generic_interrupt NULL
>> -#endif
>> -
>> /*
>> * handle all the irqs defined by the HDRC core. for now we expect: other
>> * irq sources (phy, dma, etc) will be handled first, musb->int_* values
>> @@ -1907,7 +1878,8 @@ musb_init_controller(struct device *dev, int nIrq,
>> void __iomem *ctrl)
>> musb->ops = plat->platform_ops;
>>
>> /* The musb_platform_init() call:
>> - * - adjusts musb->mregs and musb->isr if needed,
>> + * - adjusts musb->mregs if needed
>> + * - sets the musb->isr
>> * - may initialize an integrated tranceiver
>> * - initializes musb->xceiv, usually by otg_get_phy()
>> * - stops powering VBUS
>> @@ -1917,7 +1889,6 @@ musb_init_controller(struct device *dev, int nIrq,
>> void __iomem *ctrl)
>> * external/discrete ones in various flavors (twl4030 family,
>> * isp1504, non-OTG, etc) mostly hooking up through ULPI.
>> */
>> - musb->isr = generic_interrupt;
>> status = musb_platform_init(musb);
>> if (status < 0)
>> goto fail1;
>> diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
>> index 5fdb9da..5461619d 100644
>> --- a/drivers/usb/musb/omap2430.c
>> +++ b/drivers/usb/musb/omap2430.c
>> @@ -306,6 +306,26 @@ static void omap_musb_mailbox_work(struct work_struct
>> *mailbox_work)
>> omap_musb_set_mailbox(glue);
>> }
>>
>> +static irqreturn_t omap2430_musb_interrupt(int irq, void *__hci)
>> +{
>> + unsigned long flags;
>> + irqreturn_t retval = IRQ_NONE;
>> + struct musb *musb = __hci;
>> +
>> + spin_lock_irqsave(&musb->lock, flags);
>> +
>> + musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB);
>> + musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX);
>> + musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX);
>> +
>> + if (musb->int_usb || musb->int_tx || musb->int_rx)
>> + retval = musb_interrupt(musb);
>> +
>> + spin_unlock_irqrestore(&musb->lock, flags);
>> +
>> + return retval;
>> +}
>> +
>> static int omap2430_musb_init(struct musb *musb)
>> {
>> u32 l;
>> @@ -325,6 +345,8 @@ static int omap2430_musb_init(struct musb *musb)
>> return -ENODEV;
>> }
>>
>> + musb->isr = omap2430_musb_interrupt;
>> +
>> status = pm_runtime_get_sync(dev);
>> if (status < 0) {
>> dev_err(dev, "pm_runtime_get_sync FAILED %d\n", status);
>> diff --git a/drivers/usb/musb/ux500.c b/drivers/usb/musb/ux500.c
>> index a8c0fad..ec9aaec 100644
>> --- a/drivers/usb/musb/ux500.c
>> +++ b/drivers/usb/musb/ux500.c
>> @@ -36,6 +36,26 @@ struct ux500_glue {
>> };
>> #define glue_to_musb(g) platform_get_drvdata(g->musb)
>>
>> +static irqreturn_t ux500_musb_interrupt(int irq, void *__hci)
>> +{
>> + unsigned long flags;
>> + irqreturn_t retval = IRQ_NONE;
>> + struct musb *musb = __hci;
>> +
>> + spin_lock_irqsave(&musb->lock, flags);
>> +
>> + musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB);
>> + musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX);
>> + musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX);
>> +
>> + if (musb->int_usb || musb->int_tx || musb->int_rx)
>> + retval = musb_interrupt(musb);
>> +
>> + spin_unlock_irqrestore(&musb->lock, flags);
>> +
>> + return retval;
>> +}
>> +
>> static int ux500_musb_init(struct musb *musb)
>> {
>> musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
>> @@ -43,6 +63,7 @@ static int ux500_musb_init(struct musb *musb)
>> pr_err("HS USB OTG: no transceiver configured\n");
>> return -ENODEV;
>> }
>> + musb->isr = ux500_musb_interrupt;
>>
>> return 0;
>> }
>> --
>> 1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
