[PATCH 3/7] ARM: omap: Adaptive Body-Bias structures & data

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Starting with OMAP36XX, some voltage domains have an ldo for biasing
voltage to the transistors within that domain.

This ldo has three modes of operation.  The first is Forward Body-Bias
mode (FBB) which boosts performance of transistors at high OPPs by
providng a positive voltage bias.  This comes at a cost of power.

The second mode is Reverse Body-Bias or RBB.  This mode provides a
negative voltage bias which saves on static leakage at lower OPPs.

Finally ABB can also be bypassed (the default state) in which case it
will just follow the voltage of the VP/VC.

This patch introduces the data structures needed to represent the ABB
ldo's in the voltage layer, and populates the appropriate data for 3630
and OMAP4.

Not all voltage domains have an ABB ldo; on OMAP36XX the CORE voltage
domain does not have an ABB ldo, and there are none on OMAP34xx.  In
such cases the voltage data will be marked with OMAP_ABB_NO_LDO.

Signed-off-by: Mike Turquette <mturquette@xxxxxx>
Signed-off-by: Mike Turquette <mturquette@xxxxxxxxxx>
---
 arch/arm/mach-omap2/Makefile       |    6 ++-
 arch/arm/mach-omap2/abb.h          |   85 ++++++++++++++++++++++++++++++++++++
 arch/arm/mach-omap2/abb36xx_data.c |   39 +++++++++++++++++
 arch/arm/mach-omap2/abb44xx_data.c |   45 +++++++++++++++++++
 4 files changed, 173 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm/mach-omap2/abb.h
 create mode 100644 arch/arm/mach-omap2/abb36xx_data.c
 create mode 100644 arch/arm/mach-omap2/abb44xx_data.c

diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 34c2c7f..57e053e 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -95,11 +95,13 @@ endif
 # PRCM
 omap-prcm-4-5-common			=  prcm.o cminst44xx.o cm44xx.o \
 					   prcm_mpu44xx.o prminst44xx.o \
-					   vc44xx_data.o vp44xx_data.o
+					   vc44xx_data.o vp44xx_data.o \
+					   abb44xx_data.o
 obj-y					+= prm_common.o
 obj-$(CONFIG_ARCH_OMAP2)		+= prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o
 obj-$(CONFIG_ARCH_OMAP3)		+= prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o
-obj-$(CONFIG_ARCH_OMAP3)		+= vc3xxx_data.o vp3xxx_data.o
+obj-$(CONFIG_ARCH_OMAP3)		+= vc3xxx_data.o vp3xxx_data.o \
+					   abb36xx_data.o
 obj-$(CONFIG_SOC_AM33XX)		+= prcm.o prm33xx.o cm33xx.o
 obj-$(CONFIG_ARCH_OMAP4)		+= $(omap-prcm-4-5-common) prm44xx.o
 obj-$(CONFIG_SOC_OMAP5)			+= $(omap-prcm-4-5-common)
diff --git a/arch/arm/mach-omap2/abb.h b/arch/arm/mach-omap2/abb.h
new file mode 100644
index 0000000..2acc187
--- /dev/null
+++ b/arch/arm/mach-omap2/abb.h
@@ -0,0 +1,85 @@
+/*
+ * OMAP Adaptive Body-Bias structure and macro definitions
+ *
+ * Copyright (C) 2011 Texas Instruments, Inc.
+ * Mike Turquette <mturquette@xxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_ABB_H
+#define __ARCH_ARM_MACH_OMAP2_ABB_H
+
+#include <linux/kernel.h>
+
+#include "voltage.h"
+
+/* NOMINAL_OPP bypasses the ABB ldo, FAST_OPP sets it to Forward Body-Bias */
+#define OMAP_ABB_NOMINAL_OPP	0
+#define OMAP_ABB_FAST_OPP	1
+#define OMAP_ABB_NO_LDO		(~0)
+
+/* Time for the ABB ldo to settle after transition (in micro-seconds) */
+#define ABB_TRANXDONE_TIMEOUT	50
+
+/*
+ * struct omap_abb_ops - per-OMAP operations needed for ABB transition
+ *
+ * @check_tranxdone: return status of ldo transition from PRM_IRQSTATUS
+ * @clear_tranxdone: clear ABB transition status bit from PRM_IRQSTATUS
+ */
+struct omap_abb_ops {
+	u32 (*check_tranxdone)(u8 irq_id);
+	void (*clear_tranxdone)(u8 irq_id);
+};
+
+/*
+ * struct omap_abb_common - ABB data common to an OMAP family
+ *
+ * @opp_sel_mask: CTRL reg uses this to program next state of ldo
+ * @opp_change_mask: CTRL reg uses this to initiate ldo state change
+ * @sr2_wtcnt_value_mask: SETUP reg uses this to program ldo settling time
+ * @sr2en_mask: SETUP reg uses this to enable/disable ldo
+ * @active_fbb_sel_mask: SETUP reg uses this to enable/disable FBB operation
+ * @settling_time: number of micro-seconds it takes for ldo to transition
+ * @clock_cycles: settling_time is counted in multiples of clock cycles
+ * @ops: pointer to common ops for manipulating PRM_IRQSTATUS bits
+ */
+struct omap_abb_common {
+	u32 opp_sel_mask;
+	u32 opp_change_mask;
+	u32 sr2_wtcnt_value_mask;
+	u32 sr2en_mask;
+	u32 active_fbb_sel_mask;
+	unsigned long settling_time;
+	unsigned long clock_cycles;
+	const struct omap_abb_ops *ops;
+};
+
+/*
+ * struct omap_abb_instance - data for each instance of ABB ldo
+ *
+ * @setup_offs: PRM register offset for initial configuration of ABB ldo
+ * @ctrl_offs: PRM register offset for active programming of ABB ldo
+ * @prm_irq_id: IRQ handle used to resolve IRQSTATUS offset & masks
+ * @enabled: track whether ABB ldo is enabled or disabled
+ * @common: pointer to common data for all ABB ldo's
+ * @_opp_sel: internally track last programmed state of ABB ldo.  DO NOT USE
+ */
+struct omap_abb_instance {
+	u8 setup_offs;
+	u8 ctrl_offs;
+	u8 prm_irq_id;
+	bool enabled;
+	const struct omap_abb_common *common;
+	u8 _opp_sel;
+};
+
+extern struct omap_abb_instance omap36xx_abb_mpu;
+
+extern struct omap_abb_instance omap4_abb_mpu;
+extern struct omap_abb_instance omap4_abb_iva;
+
+#endif
diff --git a/arch/arm/mach-omap2/abb36xx_data.c b/arch/arm/mach-omap2/abb36xx_data.c
new file mode 100644
index 0000000..21c9267
--- /dev/null
+++ b/arch/arm/mach-omap2/abb36xx_data.c
@@ -0,0 +1,39 @@
+/*
+ * OMAP36xx Adaptive Body-Bias (ABB) data
+ *
+ * Copyright (C) 2011 Texas Instruments, Inc.
+ * Mike Turquette <mturquette@xxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "abb.h"
+#include "vp.h"
+#include "prm2xxx_3xxx.h"
+#include "prm-regbits-34xx.h"
+
+static const struct omap_abb_ops omap36xx_abb_ops = {
+	.check_tranxdone   = &omap3_prm_abb_check_txdone,
+	.clear_tranxdone   = &omap3_prm_abb_clear_txdone,
+};
+
+static const struct omap_abb_common omap36xx_abb_common = {
+	.opp_sel_mask		= OMAP3630_OPP_SEL_MASK,
+	.opp_change_mask	= OMAP3630_OPP_CHANGE_MASK,
+	.sr2en_mask		= OMAP3630_SR2EN_MASK,
+	.active_fbb_sel_mask	= OMAP3630_ACTIVE_FBB_SEL_MASK,
+	.sr2_wtcnt_value_mask	= OMAP3630_SR2_WTCNT_VALUE_MASK,
+	.settling_time		= 30,
+	.clock_cycles		= 8,
+	.ops			= &omap36xx_abb_ops,
+};
+
+/* SETUP & CTRL registers swapped names in OMAP4; thus 36xx looks strange */
+struct omap_abb_instance omap36xx_abb_mpu = {
+	.setup_offs		= OMAP3_PRM_LDO_ABB_CTRL_OFFSET,
+	.ctrl_offs		= OMAP3_PRM_LDO_ABB_SETUP_OFFSET,
+	.prm_irq_id		= OMAP3_VP_VDD_MPU_ID,
+	.common			= &omap36xx_abb_common,
+};
diff --git a/arch/arm/mach-omap2/abb44xx_data.c b/arch/arm/mach-omap2/abb44xx_data.c
new file mode 100644
index 0000000..d7ff0c5
--- /dev/null
+++ b/arch/arm/mach-omap2/abb44xx_data.c
@@ -0,0 +1,45 @@
+/*
+ * OMAP44xx Adaptive Body-Bias (ABB) data
+ *
+ * Copyright (C) 2011 Texas Instruments, Inc.
+ * Mike Turquette <mturquette@xxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "abb.h"
+#include "vp.h"
+#include "prm44xx.h"
+#include "prm-regbits-44xx.h"
+
+static const struct omap_abb_ops omap4_abb_ops = {
+	.check_tranxdone   = &omap4_prm_abb_check_txdone,
+	.clear_tranxdone   = &omap4_prm_abb_clear_txdone,
+};
+
+static const struct omap_abb_common omap4_abb_common = {
+	.opp_sel_mask		= OMAP4430_OPP_SEL_MASK,
+	.opp_change_mask	= OMAP4430_OPP_CHANGE_MASK,
+	.sr2en_mask		= OMAP4430_SR2EN_MASK,
+	.active_fbb_sel_mask	= OMAP4430_ACTIVE_FBB_SEL_MASK,
+	.sr2_wtcnt_value_mask	= OMAP4430_SR2_WTCNT_VALUE_MASK,
+	.settling_time		= 50,
+	.clock_cycles		= 16,
+	.ops			= &omap4_abb_ops,
+};
+
+struct omap_abb_instance omap4_abb_mpu = {
+	.setup_offs		= OMAP4_PRM_LDO_ABB_MPU_SETUP_OFFSET,
+	.ctrl_offs		= OMAP4_PRM_LDO_ABB_MPU_CTRL_OFFSET,
+	.prm_irq_id		= OMAP4_VP_VDD_MPU_ID,
+	.common			= &omap4_abb_common,
+};
+
+struct omap_abb_instance omap4_abb_iva = {
+	.setup_offs		= OMAP4_PRM_LDO_ABB_IVA_SETUP_OFFSET,
+	.ctrl_offs		= OMAP4_PRM_LDO_ABB_IVA_CTRL_OFFSET,
+	.prm_irq_id		= OMAP4_VP_VDD_IVA_ID,
+	.common			= &omap4_abb_common,
+};
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux