In order to make single zImage work for ARM architecture,
we need to make sure we don't depend on private headers.
Move USB platform_data to <linux/platform_data/omap-usb.h>
and keep only internal functions in <plat/usb.h>.
Signed-off-by: Felipe Balbi <balbi@xxxxxx>
---
Compile tested only.
arch/arm/mach-omap2/usb-host.c | 1 +
arch/arm/mach-omap2/usb-musb.c | 1 +
arch/arm/mach-omap2/usb-tusb6010.c | 1 +
arch/arm/plat-omap/include/plat/usb.h | 126 +--------------------
drivers/mfd/omap-usb-host.c | 2 +-
drivers/usb/musb/am35x.c | 3 +-
drivers/usb/musb/musb_dsps.c | 3 +-
drivers/usb/musb/omap2430.h | 2 +-
.../linux/platform_data/omap-usb.h | 76 +++++--------
9 files changed, 37 insertions(+), 178 deletions(-)
copy arch/arm/plat-omap/include/plat/usb.h => include/linux/platform_data/omap-usb.h (72%)
diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c
index dde8a11..9a85460 100644
--- a/arch/arm/mach-omap2/usb-host.c
+++ b/arch/arm/mach-omap2/usb-host.c
@@ -22,6 +22,7 @@
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/dma-mapping.h>
+#include <linux/platform_data/omap-usb.h>
#include <asm/io.h>
diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
index c4a5768..809e2d7 100644
--- a/arch/arm/mach-omap2/usb-musb.c
+++ b/arch/arm/mach-omap2/usb-musb.c
@@ -23,6 +23,7 @@
#include <linux/clk.h>
#include <linux/dma-mapping.h>
#include <linux/io.h>
+#include <linux/platform_data/omap-usb.h>
#include <linux/usb/musb.h>
diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c
index 805bea6..bc6c225 100644
--- a/arch/arm/mach-omap2/usb-tusb6010.c
+++ b/arch/arm/mach-omap2/usb-tusb6010.c
@@ -15,6 +15,7 @@
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/export.h>
+#include <linux/platform_data/omap-usb.h>
#include <linux/usb/musb.h>
diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h
index 548a4c8..6173467 100644
--- a/arch/arm/plat-omap/include/plat/usb.h
+++ b/arch/arm/plat-omap/include/plat/usb.h
@@ -3,82 +3,11 @@
#ifndef __ASM_ARCH_OMAP_USB_H
#define __ASM_ARCH_OMAP_USB_H
-#include <linux/io.h>
-#include <linux/usb/musb.h>
#include <plat/board.h>
-
-#define OMAP3_HS_USB_PORTS 3
-
-enum usbhs_omap_port_mode {
- OMAP_USBHS_PORT_MODE_UNUSED,
- OMAP_EHCI_PORT_MODE_PHY,
- OMAP_EHCI_PORT_MODE_TLL,
- OMAP_EHCI_PORT_MODE_HSIC,
- OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0,
- OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM,
- OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0,
- OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM,
- OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0,
- OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM,
- OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0,
- OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM,
- OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0,
- OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM
-};
-
-struct usbhs_omap_board_data {
- enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS];
-
- /* have to be valid if phy_reset is true and portx is in phy mode */
- int reset_gpio_port[OMAP3_HS_USB_PORTS];
-
- /* Set this to true for ES2.x silicon */
- unsigned es2_compatibility:1;
-
- unsigned phy_reset:1;
-
- /*
- * Regulators for USB PHYs.
- * Each PHY can have a separate regulator.
- */
- struct regulator *regulator[OMAP3_HS_USB_PORTS];
-};
+#include <linux/platform_data/omap-usb.h>
#ifdef CONFIG_ARCH_OMAP2PLUS
-struct ehci_hcd_omap_platform_data {
- enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS];
- int reset_gpio_port[OMAP3_HS_USB_PORTS];
- struct regulator *regulator[OMAP3_HS_USB_PORTS];
- unsigned phy_reset:1;
-};
-
-struct ohci_hcd_omap_platform_data {
- enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS];
- unsigned es2_compatibility:1;
-};
-
-struct usbhs_omap_platform_data {
- enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS];
-
- struct ehci_hcd_omap_platform_data *ehci_data;
- struct ohci_hcd_omap_platform_data *ohci_data;
-};
-/*-------------------------------------------------------------------------*/
-
-struct omap_musb_board_data {
- u8 interface_type;
- u8 mode;
- u16 power;
- unsigned extvbus:1;
- void (*set_phy_power)(u8 on);
- void (*clear_irq)(void);
- void (*set_mode)(u8 mode);
- void (*reset)(void);
-};
-
-enum musb_interface {MUSB_INTERFACE_ULPI, MUSB_INTERFACE_UTMI};
-
extern void usb_musb_init(struct omap_musb_board_data *board_data);
extern void usbhs_init(const struct usbhs_omap_board_data *pdata);
@@ -97,59 +26,6 @@ extern void am35x_musb_clear_irq(void);
extern void am35x_set_mode(u8 musb_mode);
extern void ti81xx_musb_phy_power(u8 on);
-/* AM35x */
-/* USB 2.0 PHY Control */
-#define CONF2_PHY_GPIOMODE (1 << 23)
-#define CONF2_OTGMODE (3 << 14)
-#define CONF2_NO_OVERRIDE (0 << 14)
-#define CONF2_FORCE_HOST (1 << 14)
-#define CONF2_FORCE_DEVICE (2 << 14)
-#define CONF2_FORCE_HOST_VBUS_LOW (3 << 14)
-#define CONF2_SESENDEN (1 << 13)
-#define CONF2_VBDTCTEN (1 << 12)
-#define CONF2_REFFREQ_24MHZ (2 << 8)
-#define CONF2_REFFREQ_26MHZ (7 << 8)
-#define CONF2_REFFREQ_13MHZ (6 << 8)
-#define CONF2_REFFREQ (0xf << 8)
-#define CONF2_PHYCLKGD (1 << 7)
-#define CONF2_VBUSSENSE (1 << 6)
-#define CONF2_PHY_PLLON (1 << 5)
-#define CONF2_RESET (1 << 4)
-#define CONF2_PHYPWRDN (1 << 3)
-#define CONF2_OTGPWRDN (1 << 2)
-#define CONF2_DATPOL (1 << 1)
-
-/* TI81XX specific definitions */
-#define USBCTRL0 0x620
-#define USBSTAT0 0x624
-
-/* TI816X PHY controls bits */
-#define TI816X_USBPHY0_NORMAL_MODE (1 << 0)
-#define TI816X_USBPHY_REFCLK_OSC (1 << 8)
-
-/* TI814X PHY controls bits */
-#define USBPHY_CM_PWRDN (1 << 0)
-#define USBPHY_OTG_PWRDN (1 << 1)
-#define USBPHY_CHGDET_DIS (1 << 2)
-#define USBPHY_CHGDET_RSTRT (1 << 3)
-#define USBPHY_SRCONDM (1 << 4)
-#define USBPHY_SINKONDP (1 << 5)
-#define USBPHY_CHGISINK_EN (1 << 6)
-#define USBPHY_CHGVSRC_EN (1 << 7)
-#define USBPHY_DMPULLUP (1 << 8)
-#define USBPHY_DPPULLUP (1 << 9)
-#define USBPHY_CDET_EXTCTL (1 << 10)
-#define USBPHY_GPIO_MODE (1 << 12)
-#define USBPHY_DPOPBUFCTL (1 << 13)
-#define USBPHY_DMOPBUFCTL (1 << 14)
-#define USBPHY_DPINPUT (1 << 15)
-#define USBPHY_DMINPUT (1 << 16)
-#define USBPHY_DPGPIO_PD (1 << 17)
-#define USBPHY_DMGPIO_PD (1 << 18)
-#define USBPHY_OTGVDET_EN (1 << 19)
-#define USBPHY_OTGSESSEND_EN (1 << 20)
-#define USBPHY_DATA_POLARITY (1 << 23)
-
#if defined(CONFIG_ARCH_OMAP1) && defined(CONFIG_USB)
u32 omap1_usb0_init(unsigned nwires, unsigned is_device);
u32 omap1_usb1_init(unsigned nwires);
diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
index 41088ec..2faeee4 100644
--- a/drivers/mfd/omap-usb-host.c
+++ b/drivers/mfd/omap-usb-host.c
@@ -27,7 +27,7 @@
#include <linux/spinlock.h>
#include <linux/gpio.h>
#include <plat/cpu.h>
-#include <plat/usb.h>
+#include <linux/platform_data/usb.h>
#include <linux/pm_runtime.h>
#define USBHS_DRIVER_NAME "usbhs_omap"
diff --git a/drivers/usb/musb/am35x.c b/drivers/usb/musb/am35x.c
index 7a95ab8..9fdb8d0 100644
--- a/drivers/usb/musb/am35x.c
+++ b/drivers/usb/musb/am35x.c
@@ -33,8 +33,7 @@
#include <linux/io.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
-
-#include <plat/usb.h>
+#include <linux/platform_data/omap-usb.h>
#include "musb_core.h"
diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
index 494772f..18b2eb6 100644
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -36,13 +36,12 @@
#include <linux/dma-mapping.h>
#include <linux/pm_runtime.h>
#include <linux/module.h>
+#include <linux/platform_data/omap-usb.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/of_address.h>
-#include <plat/usb.h>
-
#include "musb_core.h"
/**
diff --git a/drivers/usb/musb/omap2430.h b/drivers/usb/musb/omap2430.h
index 40b3c02..5b78417 100644
--- a/drivers/usb/musb/omap2430.h
+++ b/drivers/usb/musb/omap2430.h
@@ -10,7 +10,7 @@
#ifndef __MUSB_OMAP243X_H__
#define __MUSB_OMAP243X_H__
-#include <plat/usb.h>
+#include <linux/platform_data/omap-usb.h>
/*
* OMAP2430-specific definitions
diff --git a/arch/arm/plat-omap/include/plat/usb.h b/include/linux/platform_data/omap-usb.h
similarity index 72%
copy from arch/arm/plat-omap/include/plat/usb.h
copy to include/linux/platform_data/omap-usb.h
index 548a4c8..d16d835 100644
--- a/arch/arm/plat-omap/include/plat/usb.h
+++ b/include/linux/platform_data/omap-usb.h
@@ -1,11 +1,29 @@
-// include/asm-arm/mach-omap/usb.h
-
-#ifndef __ASM_ARCH_OMAP_USB_H
-#define __ASM_ARCH_OMAP_USB_H
+/*
+ * omap-usb.h - Platform data for the various OMAP USB IPs
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * This software is distributed under the terms of the GNU General Public
+ * License ("GPL") version 2, as published by the Free Software Foundation.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __LINUX_PLATFORM_DATA_OMAP_USB_H
+#define __LINUX_PLATFORM_DATA_OMAP_USB_H
#include <linux/io.h>
#include <linux/usb/musb.h>
-#include <plat/board.h>
#define OMAP3_HS_USB_PORTS 3
@@ -44,8 +62,6 @@ struct usbhs_omap_board_data {
struct regulator *regulator[OMAP3_HS_USB_PORTS];
};
-#ifdef CONFIG_ARCH_OMAP2PLUS
-
struct ehci_hcd_omap_platform_data {
enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS];
int reset_gpio_port[OMAP3_HS_USB_PORTS];
@@ -64,6 +80,7 @@ struct usbhs_omap_platform_data {
struct ehci_hcd_omap_platform_data *ehci_data;
struct ohci_hcd_omap_platform_data *ohci_data;
};
+
/*-------------------------------------------------------------------------*/
struct omap_musb_board_data {
@@ -77,25 +94,10 @@ struct omap_musb_board_data {
void (*reset)(void);
};
-enum musb_interface {MUSB_INTERFACE_ULPI, MUSB_INTERFACE_UTMI};
-
-extern void usb_musb_init(struct omap_musb_board_data *board_data);
-
-extern void usbhs_init(const struct usbhs_omap_board_data *pdata);
-
-extern int omap4430_phy_power(struct device *dev, int ID, int on);
-extern int omap4430_phy_set_clk(struct device *dev, int on);
-extern int omap4430_phy_init(struct device *dev);
-extern int omap4430_phy_exit(struct device *dev);
-extern int omap4430_phy_suspend(struct device *dev, int suspend);
-
-#endif
-
-extern void am35x_musb_reset(void);
-extern void am35x_musb_phy_power(u8 on);
-extern void am35x_musb_clear_irq(void);
-extern void am35x_set_mode(u8 musb_mode);
-extern void ti81xx_musb_phy_power(u8 on);
+enum musb_interface {
+ MUSB_INTERFACE_ULPI,
+ MUSB_INTERFACE_UTMI
+};
/* AM35x */
/* USB 2.0 PHY Control */
@@ -150,24 +152,4 @@ extern void ti81xx_musb_phy_power(u8 on);
#define USBPHY_OTGSESSEND_EN (1 << 20)
#define USBPHY_DATA_POLARITY (1 << 23)
-#if defined(CONFIG_ARCH_OMAP1) && defined(CONFIG_USB)
-u32 omap1_usb0_init(unsigned nwires, unsigned is_device);
-u32 omap1_usb1_init(unsigned nwires);
-u32 omap1_usb2_init(unsigned nwires, unsigned alt_pingroup);
-#else
-static inline u32 omap1_usb0_init(unsigned nwires, unsigned is_device)
-{
- return 0;
-}
-static inline u32 omap1_usb1_init(unsigned nwires)
-{
- return 0;
-
-}
-static inline u32 omap1_usb2_init(unsigned nwires, unsigned alt_pingroup)
-{
- return 0;
-}
-#endif
-
-#endif /* __ASM_ARCH_OMAP_USB_H */
+#endif /* __LINUX_PLATFORM_DATA_OMAP_USB_H */
--
1.7.12
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
