Hi Sakari,
Thanks for the patch.
On Thursday 27 September 2012 00:50:35 Sakari Ailus wrote:
> The OMAP 3630 has configuration how the ISP CSI-2 PHY pins are connected to
> the actual CSI-2 receivers outside the ISP itself. Allow changing this
> configuration from the ISP driver.
>
> Signed-off-by: Sakari Ailus <sakari.ailus@xxxxxx>
Just one small comment below, otherwise
Acked-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> ---
> arch/arm/mach-omap2/control.c | 86 +++++++++++++++++++++++++
> arch/arm/mach-omap2/control.h | 15 +++++
> arch/arm/mach-omap2/include/mach/control.h | 13 ++++
> 3 files changed, 114 insertions(+), 0 deletions(-)
> create mode 100644 arch/arm/mach-omap2/include/mach/control.h
>
> diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
> index 3223b81..11bb900 100644
> --- a/arch/arm/mach-omap2/control.c
> +++ b/arch/arm/mach-omap2/control.c
> @@ -12,9 +12,12 @@
> */
> #undef DEBUG
>
> +#include <linux/export.h>
> #include <linux/kernel.h>
> #include <linux/io.h>
>
> +#include <mach/control.h>
> +
> #include <plat/hardware.h>
> #include <plat/sdrc.h>
>
> @@ -607,4 +610,87 @@ int omap3_ctrl_save_padconf(void)
> return 0;
> }
>
> +static int omap3630_ctrl_csi2_phy_cfg(u32 phy, u32 flags)
> +{
> + u32 cam_phy_ctrl =
> + omap_ctrl_readl(OMAP3630_CONTROL_CAMERA_PHY_CTRL);
> + u32 shift, mode;
> +
> + switch (phy) {
> + case OMAP3_CTRL_CSI2_PHY1_CCP2B:
> + cam_phy_ctrl &= ~OMAP3630_CONTROL_CAMERA_PHY_CTRL_CSI1_RX_SEL_PHY2;
> + shift = OMAP3630_CONTROL_CAMERA_PHY_CTRL_CAMMODE_PHY1_SHIFT;
> + break;
> + case OMAP3_CTRL_CSI2_PHY1_CSI2C:
> + shift = OMAP3630_CONTROL_CAMERA_PHY_CTRL_CAMMODE_PHY1_SHIFT;
> + mode = OMAP3630_CONTROL_CAMERA_PHY_CTRL_CAMMODE_DPHY;
> + break;
> + case OMAP3_CTRL_CSI2_PHY2_CCP2B:
> + cam_phy_ctrl |= OMAP3630_CONTROL_CAMERA_PHY_CTRL_CSI1_RX_SEL_PHY2;
> + shift = OMAP3630_CONTROL_CAMERA_PHY_CTRL_CAMMODE_PHY2_SHIFT;
> + break;
> + case OMAP3_CTRL_CSI2_PHY2_CSI2A:
> + shift = OMAP3630_CONTROL_CAMERA_PHY_CTRL_CAMMODE_PHY2_SHIFT;
> + mode = OMAP3630_CONTROL_CAMERA_PHY_CTRL_CAMMODE_DPHY;
> + break;
> + default:
> + pr_warn("bad phy %d\n", phy);
> + return -EINVAL;
> + }
> +
> + /* Select data/clock or data/strobe mode for CCP2 */
> + switch (phy) {
> + case OMAP3_CTRL_CSI2_PHY1_CCP2B:
> + case OMAP3_CTRL_CSI2_PHY2_CCP2B:
> + if (flags & OMAP3_CTRL_CSI2_CFG_CCP2_DATA_STROBE)
> + mode = OMAP3630_CONTROL_CAMERA_PHY_CTRL_CAMMODE_CCP2_DATA_STROBE;
> + else
> + mode = OMAP3630_CONTROL_CAMERA_PHY_CTRL_CAMMODE_CCP2_DATA_CLOCK;
> + break;
> + }
> +
> + cam_phy_ctrl &= ~(OMAP3630_CONTROL_CAMERA_PHY_CTRL_CAMMODE_MASK <<
shift);
> + cam_phy_ctrl |= mode << shift;
> +
> + omap_ctrl_writel(cam_phy_ctrl,
> + OMAP3630_CONTROL_CAMERA_PHY_CTRL);
This can fit on one line.
> +
> + return 0;
> +}
> +
> +static int omap3430_ctrl_csi2_phy_cfg(u32 phy, bool on, u32 flags)
> +{
> + uint32_t csirxfe = OMAP343X_CONTROL_CSIRXFE_PWRDNZ
> + | OMAP343X_CONTROL_CSIRXFE_RESET;
> +
> + /* Nothing to configure here. */
> + if (phy == OMAP3_CTRL_CSI2_PHY2_CSI2A)
> + return 0;
> +
> + if (phy != OMAP3_CTRL_CSI2_PHY1_CCP2B)
> + return -EINVAL;
> +
> + if (!on) {
> + omap_ctrl_writel(0, OMAP343X_CONTROL_CSIRXFE);
> + return 0;
> + }
> +
> + if (flags & OMAP3_CTRL_CSI2_CFG_CCP2_DATA_STROBE)
> + csirxfe |= OMAP343X_CONTROL_CSIRXFE_SELFORM;
> +
> + omap_ctrl_writel(csirxfe, OMAP343X_CONTROL_CSIRXFE);
> +
> + return 0;
> +}
> +
> +int omap3_ctrl_csi2_phy_cfg(u32 phy, bool on, u32 flags)
> +{
> + if (cpu_is_omap3630() && on)
> + return omap3630_ctrl_csi2_phy_cfg(phy, flags);
> + if (cpu_is_omap3430())
> + return omap3430_ctrl_csi2_phy_cfg(phy, on, flags);
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(omap3_ctrl_csi2_phy_cfg);
> +
> #endif /* CONFIG_ARCH_OMAP3 && CONFIG_PM */
> diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h
> index b8cdc85..7b2ee5d 100644
> --- a/arch/arm/mach-omap2/control.h
> +++ b/arch/arm/mach-omap2/control.h
> @@ -132,6 +132,11 @@
> #define OMAP343X_CONTROL_MEM_DFTRW1 (OMAP2_CONTROL_GENERAL + 0x000c)
> #define OMAP343X_CONTROL_DEVCONF1 (OMAP2_CONTROL_GENERAL + 0x0068)
> #define OMAP343X_CONTROL_CSIRXFE (OMAP2_CONTROL_GENERAL + 0x006c)
> +#define OMAP343X_CONTROL_CSIRXFE_CSIB_INV (1 << 7)
> +#define OMAP343X_CONTROL_CSIRXFE_RESENABLE (1 << 8)
> +#define OMAP343X_CONTROL_CSIRXFE_SELFORM (1 << 10)
> +#define OMAP343X_CONTROL_CSIRXFE_PWRDNZ (1 << 12)
> +#define OMAP343X_CONTROL_CSIRXFE_RESET (1 << 13)
> #define OMAP343X_CONTROL_SEC_STATUS (OMAP2_CONTROL_GENERAL + 0x0070)
> #define OMAP343X_CONTROL_SEC_ERR_STATUS (OMAP2_CONTROL_GENERAL +
0x0074)
> #define OMAP343X_CONTROL_SEC_ERR_STATUS_DEBUG (OMAP2_CONTROL_GENERAL +
> 0x0078)
--
Regards,
Laurent Pinchart
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
