Re: [PATCH 4/4] usb: phy: omap-usb2: enable 960Mhz clock for omap5

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Wed, Sep 19, 2012 at 5:26 PM, Felipe Balbi <balbi@xxxxxx> wrote:
> On Wed, Sep 19, 2012 at 05:00:29PM +0530, Kishon Vijay Abraham I wrote:
>> "usb_otg_ss_refclk960m" is needed by usb2 phy present in omap5. For
>> omap4, the clk_get of this clock will fail since it does not have this
>> clock.
>>
>> Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
>> ---
>>  Documentation/devicetree/bindings/usb/usb-phy.txt |    3 +++
>>  drivers/usb/phy/omap-usb2.c                       |   28 ++++++++++++++++++++-
>>  2 files changed, 30 insertions(+), 1 deletion(-)
>>
>> diff --git a/Documentation/devicetree/bindings/usb/usb-phy.txt b/Documentation/devicetree/bindings/usb/usb-phy.txt
>> index 7c5fd89..d5626de 100644
>> --- a/Documentation/devicetree/bindings/usb/usb-phy.txt
>> +++ b/Documentation/devicetree/bindings/usb/usb-phy.txt
>> @@ -24,6 +24,9 @@ Required properties:
>>  add the address of control module phy power register until a driver for
>>  control module is added
>>
>> +Optional properties:
>> + - has960mhzclk: should be added if the phy needs 960mhz clock
>> +
>>  This is usually a subnode of ocp2scp to which it is connected.
>>
>>  usb3phy@4a084400 {
>> diff --git a/drivers/usb/phy/omap-usb2.c b/drivers/usb/phy/omap-usb2.c
>> index d36c282..d6612ba 100644
>> --- a/drivers/usb/phy/omap-usb2.c
>> +++ b/drivers/usb/phy/omap-usb2.c
>> @@ -146,6 +146,7 @@ static int __devinit omap_usb2_probe(struct platform_device *pdev)
>>       struct omap_usb                 *phy;
>>       struct usb_otg                  *otg;
>>       struct resource                 *res;
>> +     struct device_node              *np = pdev->dev.of_node;
>>
>>       phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL);
>>       if (!phy) {
>> @@ -190,6 +191,15 @@ static int __devinit omap_usb2_probe(struct platform_device *pdev)
>>       }
>>       clk_prepare(phy->wkupclk);
>>
>> +     if (of_property_read_bool(np, "has960mhzclk")) {
>> +             phy->optclk = devm_clk_get(phy->dev, "usb_otg_ss_refclk960m");
>> +             if (IS_ERR(phy->optclk)) {
>> +                     dev_err(&pdev->dev, "unable to get refclk960m\n");
>> +                     return PTR_ERR(phy->optclk);
>> +             }
>> +             clk_prepare(phy->optclk);
>> +     }
>
> instead, can't you just always try to get the clock but ignore the error
> if it fails ?

This clock is needed for usb2 to work in dwc3 (omap5). So we have to
report the error in case we dont get the clock no?

Thanks
Kishon
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux