Re: [PATCH] mfd: Fix compile for twl-core.c by removing cpu_is_omap usage

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Sep 17, 2012 at 01:29:44PM -0700, Tony Lindgren wrote:
> Commit 7d7e1eba (ARM: OMAP2+: Prepare for irqs.h removal) broke
> compile for non-omap as include plat/cpu.h was added:
> 
> drivers/mfd/twl-core.c:49:22: fatal error: plat/cpu.h: No such file or directory
> 
> This header was indirectly included earlier when SPARSE_IRQ was not
> set, but does not exist on most platforms.
> 
> Fix the problem by removing the cpu_is_omap usage that should
> not exist in drivers at all. We can do this by adding proper
> clock aliases for the twl-core.c drivers, and drop separate
> handling for cases when clock framework is not available as
> the behaviour will stay the same.
> 
> Note that we need to add a platform device to avoid using the
> i2c provided names that may be different on various omaps.
> 
> Reported-by: Fengguang Wu <fengguang.wu@xxxxxxxxx>
> Reported-by: Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx>
> Cc: Paul Walmsley <paul@xxxxxxxxx>
> Cc: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
> Cc: Arnd Bergmann <arnd@xxxxxxxx>
> Cc: Olof Johansson <olof@xxxxxxxxx>
> Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>

FWIW:

Reviewed-by: Felipe Balbi <balbi@xxxxxx>

> ---
> 
> Samuel, I'd like to queue this via arm-soc as that's where I have
> the breaking patch is if this patch is OK with you.
> 
> --- a/arch/arm/mach-omap2/clock2430_data.c
> +++ b/arch/arm/mach-omap2/clock2430_data.c
> @@ -1856,6 +1856,7 @@ static struct omap_clk omap2430_clks[] = {
>  	CLK(NULL,	"func_32k_ck",	&func_32k_ck,	CK_243X),
>  	CLK(NULL,	"secure_32k_ck", &secure_32k_ck, CK_243X),
>  	CLK(NULL,	"osc_ck",	&osc_ck,	CK_243X),
> +	CLK("twl",	"fck",		&osc_ck,	CK_243X),
>  	CLK(NULL,	"sys_ck",	&sys_ck,	CK_243X),
>  	CLK(NULL,	"alt_ck",	&alt_ck,	CK_243X),
>  	CLK(NULL,	"mcbsp_clks",	&mcbsp_clks,	CK_243X),
> --- a/arch/arm/mach-omap2/clock3xxx_data.c
> +++ b/arch/arm/mach-omap2/clock3xxx_data.c
> @@ -3226,6 +3226,7 @@ static struct omap_clk omap3xxx_clks[] = {
>  	CLK(NULL,	"virt_26000000_ck",	&virt_26000000_ck,	CK_3XXX),
>  	CLK(NULL,	"virt_38_4m_ck", &virt_38_4m_ck, CK_3XXX),
>  	CLK(NULL,	"osc_sys_ck",	&osc_sys_ck,	CK_3XXX),
> +	CLK("twl",	"fck",		&osc_sys_ck,	CK_3XXX),
>  	CLK(NULL,	"sys_ck",	&sys_ck,	CK_3XXX),
>  	CLK(NULL,	"sys_altclk",	&sys_altclk,	CK_3XXX),
>  	CLK(NULL,	"mcbsp_clks",	&mcbsp_clks,	CK_3XXX),
> --- a/drivers/mfd/twl-core.c
> +++ b/drivers/mfd/twl-core.c
> @@ -46,8 +46,6 @@
>  #include <linux/i2c.h>
>  #include <linux/i2c/twl.h>
>  
> -#include <plat/cpu.h>
> -
>  #include "twl-core.h"
>  
>  /*
> @@ -1134,12 +1132,7 @@ static void clocks_init(struct device *dev,
>  	u32 rate;
>  	u8 ctrl = HFCLK_FREQ_26_MHZ;
>  
> -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
> -	if (cpu_is_omap2430())
> -		osc = clk_get(dev, "osc_ck");
> -	else
> -		osc = clk_get(dev, "osc_sys_ck");
> -
> +	osc = clk_get(dev, "fck");
>  	if (IS_ERR(osc)) {
>  		printk(KERN_WARNING "Skipping twl internal clock init and "
>  				"using bootloader value (unknown osc rate)\n");
> @@ -1149,18 +1142,6 @@ static void clocks_init(struct device *dev,
>  	rate = clk_get_rate(osc);
>  	clk_put(osc);
>  
> -#else
> -	/* REVISIT for non-OMAP systems, pass the clock rate from
> -	 * board init code, using platform_data.
> -	 */
> -	osc = ERR_PTR(-EIO);
> -
> -	printk(KERN_WARNING "Skipping twl internal clock init and "
> -	       "using bootloader value (unknown osc rate)\n");
> -
> -	return;
> -#endif
> -
>  	switch (rate) {
>  	case 19200000:
>  		ctrl = HFCLK_FREQ_19p2_MHZ;
> @@ -1222,10 +1203,23 @@ twl_probe(struct i2c_client *client, const struct i2c_device_id *id)
>  {
>  	struct twl4030_platform_data	*pdata = client->dev.platform_data;
>  	struct device_node		*node = client->dev.of_node;
> +	struct platform_device		*pdev;
>  	int				irq_base = 0;
>  	int				status;
>  	unsigned			i, num_slaves;
>  
> +	pdev = platform_device_alloc(DRIVER_NAME, -1);
> +	if (!pdev) {
> +		dev_err(&client->dev, "can't alloc pdev\n");
> +		return -ENOMEM;
> +	}
> +
> +	status = platform_device_add(pdev);
> +	if (status) {
> +		platform_device_put(pdev);
> +		return status;
> +	}
> +
>  	if (node && !pdata) {
>  		/*
>  		 * XXX: Temporary pdata until the information is correctly
> @@ -1234,23 +1228,30 @@ twl_probe(struct i2c_client *client, const struct i2c_device_id *id)
>  		pdata = devm_kzalloc(&client->dev,
>  				     sizeof(struct twl4030_platform_data),
>  				     GFP_KERNEL);
> -		if (!pdata)
> -			return -ENOMEM;
> +		if (!pdata) {
> +			status = -ENOMEM;
> +			goto free;
> +		}
>  	}
>  
>  	if (!pdata) {
>  		dev_dbg(&client->dev, "no platform data?\n");
> -		return -EINVAL;
> +		status = -EINVAL;
> +		goto free;
>  	}
>  
> +	platform_set_drvdata(pdev, pdata);
> +
>  	if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C) == 0) {
>  		dev_dbg(&client->dev, "can't talk I2C?\n");
> -		return -EIO;
> +		status = -EIO;
> +		goto free;
>  	}
>  
>  	if (inuse) {
>  		dev_dbg(&client->dev, "driver is already in use\n");
> -		return -EBUSY;
> +		status = -EBUSY;
> +		goto free;
>  	}
>  
>  	if ((id->driver_data) & TWL6030_CLASS) {
> @@ -1285,7 +1286,7 @@ twl_probe(struct i2c_client *client, const struct i2c_device_id *id)
>  	inuse = true;
>  
>  	/* setup clock framework */
> -	clocks_init(&client->dev, pdata->clock);
> +	clocks_init(&pdev->dev, pdata->clock);
>  
>  	/* read TWL IDCODE Register */
>  	if (twl_id == TWL4030_CLASS_ID) {
> @@ -1335,6 +1336,9 @@ twl_probe(struct i2c_client *client, const struct i2c_device_id *id)
>  fail:
>  	if (status < 0)
>  		twl_remove(client);
> +free:
> +	if (status < 0)
> +		platform_device_unregister(pdev);
>  
>  	return status;
>  }

-- 
balbi

Attachment: signature.asc
Description: Digital signature


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux