Changes since v1: - warns that pins are not configured by the driver rather than exiting - dummy states are only enabled for OMAP platforms where DT is not populated This series enables pinctrl support for McSPI. Platforms that boot only from DT and rely on pinctrl to set pinmuxes appropriately require this for omap2-mcspi operation. It has been tested on AM335x BeagleBone with an Adafruit SPI LCD attached and regression tested on Beagleboard xM booting in the !DT case, using board-omap3evm.c. The series applies on top of Tony's dt-devel branch. Matt Porter (2): spi: omap2-mcspi: add pinctrl support ARM: OMAP2+: Enable pinctrl dummy states arch/arm/mach-omap2/devices.c | 5 +++++ drivers/spi/spi-omap2-mcspi.c | 8 ++++++++ 2 files changed, 13 insertions(+) -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
