When src_maxburst/dst_maxburst is set to 0 by the users of cyclic DMA (mostly audio) indicates that we should configure the omap DMA to element sync mode instead of packet mode. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@xxxxxx> CC: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx> --- drivers/dma/omap-dma.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/dma/omap-dma.c b/drivers/dma/omap-dma.c index ae05618..b77a40d 100644 --- a/drivers/dma/omap-dma.c +++ b/drivers/dma/omap-dma.c @@ -413,7 +413,10 @@ static struct dma_async_tx_descriptor *omap_dma_prep_dma_cyclic( d->dev_addr = dev_addr; d->fi = burst; d->es = es; - d->sync_mode = OMAP_DMA_SYNC_PACKET; + if (burst) + d->sync_mode = OMAP_DMA_SYNC_PACKET; + else + d->sync_mode = OMAP_DMA_SYNC_ELEMENT; d->sync_type = sync_type; d->periph_port = OMAP_DMA_PORT_MPUI; d->sg[0].addr = buf_addr; -- 1.7.12 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html