+Tony
On Tue, Sep 11, 2012 at 11:58:54, Mohammed, Afzal wrote:
> Let probe return error value if gpmc terminal
> count interrupt could not be obtained
>
> Signed-off-by: Afzal Mohammed <afzal@xxxxxx>
> ---
> Hi,
>
> My commit (now in l-o/devel-gpmc),
>
> "bd4156f mtd: nand: omap2: use gpmc provided irqs"
>
> did not propogate error code properly due to
> which this fix was required.
>
> But this has not been mentioned in commit message
> as it is not yet in mainline.
>
> Regards
> Afzal
>
> drivers/mtd/nand/omap2.c | 1 +
> 1 files changed, 1 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
> index 337cf0a..27293e3 100644
> --- a/drivers/mtd/nand/omap2.c
> +++ b/drivers/mtd/nand/omap2.c
> @@ -1404,6 +1404,7 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)
> info->gpmc_irq_count = platform_get_irq(pdev, 1);
> if (info->gpmc_irq_count <= 0) {
> dev_err(&pdev->dev, "error getting count irq\n");
> + err = -ENODEV;
> goto out_release_mem_region;
> }
> err = request_irq(info->gpmc_irq_count, omap_nand_irq,
> --
> 1.7.0.4
>
>
��.n��������+%������w��{.n�����{�������ܨ}���Ơz�j:+v�����w����ޙ��&�)ߡ�a����z�ޗ���ݢj��w�f
