Tony,
On Fri, Sep 07, 2012 at 02:28:12, Tony Lindgren wrote:
> * AnilKumar Ch <anilkumar@xxxxxx> [120905 04:42]:
> > Adds GPIO pinctrl nodes to am3358_pinmux master node to control
> > user leds (USR0, USR1, USR2 and USR3) present on BeagleBone.
> >
> > [koen@xxxxxxxxxxxxxxxxxxxxx: led0, led1 suggested by koen]
> > Signed-off-by: AnilKumar Ch <anilkumar@xxxxxx>
> > ---
> > arch/arm/boot/dts/am335x-bone.dts | 43 +++++++++++++++++++++++++++++++++++++
> > 1 file changed, 43 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts
> > index c634f87..822efe6 100644
> > --- a/arch/arm/boot/dts/am335x-bone.dts
> > +++ b/arch/arm/boot/dts/am335x-bone.dts
> > @@ -18,11 +18,54 @@
> > reg = <0x80000000 0x10000000>; /* 256 MB */
> > };
> >
> > + am3358_pinmux: pinmux@44e10800 {
> > + userled_pins: pinmux_userled_pins {
> > + pinctrl-single,pins = <
> > + 0x54 0x7 /* gpmc_a5.gpio1_21, OUTPUT | MODE7 */
> > + 0x58 0x17 /* gpmc_a6.gpio1_22, OUTPUT_PULLUP | MODE7 */
> > + 0x5c 0x7 /* gpmc_a7.gpio1_23, OUTPUT | MODE7 */
> > + 0x60 0x17 /* gpmc_a8.gpio1_24, OUTPUT_PULLUP | MODE7 */
> > + >;
> > + };
> > + };
> > +
>
> Just checking.. am3358_pinmux should be am33xx_pinmux in this patch
> too as discussed.
>
Yes, this is also changed in v7.
Thanks
AnilKumar
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
