Hi Roger,
On Fri, Aug 10, 2012 at 4:05 PM, Roger Quadros <rogerq@xxxxxx> wrote:
> gets rid of below messages with CONFIG_DEBUG_PREEMPT enabled
>
> [ 28.832916] debug_smp_processor_id: 18 callbacks suppressed
> [ 28.832946] BUG: using smp_processor_id() in preemptible [00000000] code: modprobe/1763
> [ 28.841491] caller is pwrdm_set_next_pwrst+0x54/0x120
>
> Signed-off-by: Roger Quadros <rogerq@xxxxxx>
What his the status of the patch? Has it been reviewed and taken in an
integration tree? I cannot find anything about it in l-o and
linux-next.
I have some changes on-going in the OMAP PM code and I would like to
know if $SUBJECT is applicable.
Regards,
Jean
> ---
> arch/arm/mach-omap2/clock.c | 9 ++++++---
> arch/arm/mach-omap2/pm34xx.c | 12 ++++++++----
> arch/arm/mach-omap2/powerdomain.c | 6 ++++--
> 3 files changed, 18 insertions(+), 9 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
> index ea3f565..06747b6 100644
> --- a/arch/arm/mach-omap2/clock.c
> +++ b/arch/arm/mach-omap2/clock.c
> @@ -285,7 +285,8 @@ void omap2_clk_disable(struct clk *clk)
> pr_debug("clock: %s: disabling in hardware\n", clk->name);
>
> if (clk->ops && clk->ops->disable) {
> - trace_clock_disable(clk->name, 0, smp_processor_id());
> + trace_clock_disable(clk->name, 0, get_cpu());
> + put_cpu();
> clk->ops->disable(clk);
> }
>
> @@ -339,7 +340,8 @@ int omap2_clk_enable(struct clk *clk)
> }
>
> if (clk->ops && clk->ops->enable) {
> - trace_clock_enable(clk->name, 1, smp_processor_id());
> + trace_clock_enable(clk->name, 1, get_cpu());
> + put_cpu();
> ret = clk->ops->enable(clk);
> if (ret) {
> WARN(1, "clock: %s: could not enable: %d\n",
> @@ -380,7 +382,8 @@ int omap2_clk_set_rate(struct clk *clk, unsigned long rate)
>
> /* dpll_ck, core_ck, virt_prcm_set; plus all clksel clocks */
> if (clk->set_rate) {
> - trace_clock_set_rate(clk->name, rate, smp_processor_id());
> + trace_clock_set_rate(clk->name, rate, get_cpu());
> + put_cpu();
> ret = clk->set_rate(clk, rate);
> }
>
> diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
> index e4fc88c..81fec2e 100644
> --- a/arch/arm/mach-omap2/pm34xx.c
> +++ b/arch/arm/mach-omap2/pm34xx.c
> @@ -357,18 +357,22 @@ void omap_sram_idle(void)
>
> static void omap3_pm_idle(void)
> {
> + unsigned cpu;
> +
> local_fiq_disable();
>
> if (omap_irq_pending())
> goto out;
>
> - trace_power_start(POWER_CSTATE, 1, smp_processor_id());
> - trace_cpu_idle(1, smp_processor_id());
> + cpu = get_cpu();
> + trace_power_start(POWER_CSTATE, 1, cpu);
> + trace_cpu_idle(1, cpu);
>
> omap_sram_idle();
>
> - trace_power_end(smp_processor_id());
> - trace_cpu_idle(PWR_EVENT_EXIT, smp_processor_id());
> + trace_power_end(cpu);
> + trace_cpu_idle(PWR_EVENT_EXIT, cpu);
> + put_cpu();
>
> out:
> local_fiq_enable();
> diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c
> index 69b36e1..138bf86 100644
> --- a/arch/arm/mach-omap2/powerdomain.c
> +++ b/arch/arm/mach-omap2/powerdomain.c
> @@ -169,7 +169,8 @@ static int _pwrdm_state_switch(struct powerdomain *pwrdm, int flag)
> ((state & OMAP_POWERSTATE_MASK) << 8) |
> ((prev & OMAP_POWERSTATE_MASK) << 0));
> trace_power_domain_target(pwrdm->name, trace_state,
> - smp_processor_id());
> + get_cpu());
> + put_cpu();
> }
> break;
> default:
> @@ -491,7 +492,8 @@ int pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
> if (arch_pwrdm && arch_pwrdm->pwrdm_set_next_pwrst) {
> /* Trace the pwrdm desired target state */
> trace_power_domain_target(pwrdm->name, pwrst,
> - smp_processor_id());
> + get_cpu());
> + put_cpu();
> /* Program the pwrdm desired target state */
> ret = arch_pwrdm->pwrdm_set_next_pwrst(pwrdm, pwrst);
> }
> --
> 1.7.4.1
>
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
