Use devm_ functions in panel-taal.c's probe when possible. Also reorder
the initialization sequence so that devm_ allocations are done before
things that require explicit freeing. This simplifies the probe and
remove functions.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
---
drivers/video/omap2/displays/panel-taal.c | 118 +++++++++++------------------
1 file changed, 44 insertions(+), 74 deletions(-)
diff --git a/drivers/video/omap2/displays/panel-taal.c b/drivers/video/omap2/displays/panel-taal.c
index 7b2d7bb..1255864 100644
--- a/drivers/video/omap2/displays/panel-taal.c
+++ b/drivers/video/omap2/displays/panel-taal.c
@@ -865,10 +865,8 @@ static int taal_probe(struct omap_dss_device *dssdev)
dev_dbg(&dssdev->dev, "probe\n");
- if (!panel_data || !panel_data->name) {
- r = -EINVAL;
- goto err;
- }
+ if (!panel_data || !panel_data->name)
+ return -EINVAL;
for (i = 0; i < ARRAY_SIZE(panel_configs); i++) {
if (strcmp(panel_data->name, panel_configs[i].name) == 0) {
@@ -877,21 +875,17 @@ static int taal_probe(struct omap_dss_device *dssdev)
}
}
- if (!panel_config) {
- r = -EINVAL;
- goto err;
- }
+ if (!panel_config)
+ return -EINVAL;
dssdev->panel.timings = panel_config->timings;
dssdev->panel.dsi_pix_fmt = OMAP_DSS_DSI_FMT_RGB888;
dssdev->caps = OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE |
OMAP_DSS_DISPLAY_CAP_TEAR_ELIM;
- td = kzalloc(sizeof(*td), GFP_KERNEL);
- if (!td) {
- r = -ENOMEM;
- goto err;
- }
+ td = devm_kzalloc(&dssdev->dev, sizeof(*td), GFP_KERNEL);
+ if (!td)
+ return -ENOMEM;
td->dssdev = dssdev;
td->panel_config = panel_config;
td->esd_interval = panel_data->esd_interval;
@@ -902,26 +896,51 @@ static int taal_probe(struct omap_dss_device *dssdev)
atomic_set(&td->do_update, 0);
- td->workqueue = create_singlethread_workqueue("taal_esd");
- if (td->workqueue == NULL) {
- dev_err(&dssdev->dev, "can't create ESD workqueue\n");
- r = -ENOMEM;
- goto err_wq;
- }
- INIT_DELAYED_WORK_DEFERRABLE(&td->esd_work, taal_esd_work);
- INIT_DELAYED_WORK(&td->ulps_work, taal_ulps_work);
-
dev_set_drvdata(&dssdev->dev, td);
if (gpio_is_valid(panel_data->reset_gpio)) {
- r = gpio_request_one(panel_data->reset_gpio, GPIOF_OUT_INIT_LOW,
- "taal rst");
+ r = devm_gpio_request_one(&dssdev->dev, panel_data->reset_gpio,
+ GPIOF_OUT_INIT_LOW, "taal rst");
if (r) {
dev_err(&dssdev->dev, "failed to request reset gpio\n");
- goto err_rst_gpio;
+ return r;
}
}
+ if (panel_data->use_ext_te) {
+ int gpio = panel_data->ext_te_gpio;
+
+ r = devm_gpio_request_one(&dssdev->dev, gpio, GPIOF_IN,
+ "taal irq");
+ if (r) {
+ dev_err(&dssdev->dev, "GPIO request failed\n");
+ return r;
+ }
+
+ r = devm_request_irq(&dssdev->dev, gpio_to_irq(gpio),
+ taal_te_isr,
+ IRQF_TRIGGER_RISING,
+ "taal vsync", dssdev);
+
+ if (r) {
+ dev_err(&dssdev->dev, "IRQ request failed\n");
+ return r;
+ }
+
+ INIT_DELAYED_WORK_DEFERRABLE(&td->te_timeout_work,
+ taal_te_timeout_work_callback);
+
+ dev_dbg(&dssdev->dev, "Using GPIO TE\n");
+ }
+
+ td->workqueue = create_singlethread_workqueue("taal_esd");
+ if (td->workqueue == NULL) {
+ dev_err(&dssdev->dev, "can't create ESD workqueue\n");
+ return -ENOMEM;
+ }
+ INIT_DELAYED_WORK_DEFERRABLE(&td->esd_work, taal_esd_work);
+ INIT_DELAYED_WORK(&td->ulps_work, taal_ulps_work);
+
taal_hw_reset(dssdev);
if (panel_data->use_dsi_backlight) {
@@ -945,31 +964,6 @@ static int taal_probe(struct omap_dss_device *dssdev)
taal_bl_update_status(bldev);
}
- if (panel_data->use_ext_te) {
- int gpio = panel_data->ext_te_gpio;
-
- r = gpio_request_one(gpio, GPIOF_IN, "taal irq");
- if (r) {
- dev_err(&dssdev->dev, "GPIO request failed\n");
- goto err_gpio;
- }
-
- r = request_irq(gpio_to_irq(gpio), taal_te_isr,
- IRQF_TRIGGER_RISING,
- "taal vsync", dssdev);
-
- if (r) {
- dev_err(&dssdev->dev, "IRQ request failed\n");
- gpio_free(gpio);
- goto err_irq;
- }
-
- INIT_DELAYED_WORK_DEFERRABLE(&td->te_timeout_work,
- taal_te_timeout_work_callback);
-
- dev_dbg(&dssdev->dev, "Using GPIO TE\n");
- }
-
r = omap_dsi_request_vc(dssdev, &td->channel);
if (r) {
dev_err(&dssdev->dev, "failed to get virtual channel\n");
@@ -993,29 +987,16 @@ static int taal_probe(struct omap_dss_device *dssdev)
err_vc_id:
omap_dsi_release_vc(dssdev, td->channel);
err_req_vc:
- if (panel_data->use_ext_te)
- free_irq(gpio_to_irq(panel_data->ext_te_gpio), dssdev);
-err_irq:
- if (panel_data->use_ext_te)
- gpio_free(panel_data->ext_te_gpio);
-err_gpio:
if (bldev != NULL)
backlight_device_unregister(bldev);
err_bl:
- if (gpio_is_valid(panel_data->reset_gpio))
- gpio_free(panel_data->reset_gpio);
-err_rst_gpio:
destroy_workqueue(td->workqueue);
-err_wq:
- kfree(td);
-err:
return r;
}
static void __exit taal_remove(struct omap_dss_device *dssdev)
{
struct taal_data *td = dev_get_drvdata(&dssdev->dev);
- struct nokia_dsi_panel_data *panel_data = get_panel_data(dssdev);
struct backlight_device *bldev;
dev_dbg(&dssdev->dev, "remove\n");
@@ -1023,12 +1004,6 @@ static void __exit taal_remove(struct omap_dss_device *dssdev)
sysfs_remove_group(&dssdev->dev.kobj, &taal_attr_group);
omap_dsi_release_vc(dssdev, td->channel);
- if (panel_data->use_ext_te) {
- int gpio = panel_data->ext_te_gpio;
- free_irq(gpio_to_irq(gpio), dssdev);
- gpio_free(gpio);
- }
-
bldev = td->bldev;
if (bldev != NULL) {
bldev->props.power = FB_BLANK_POWERDOWN;
@@ -1042,11 +1017,6 @@ static void __exit taal_remove(struct omap_dss_device *dssdev)
/* reset, to be sure that the panel is in a valid state */
taal_hw_reset(dssdev);
-
- if (gpio_is_valid(panel_data->reset_gpio))
- gpio_free(panel_data->reset_gpio);
-
- kfree(td);
}
static int taal_power_on(struct omap_dss_device *dssdev)
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
