Re: [PATCH 6/9] ARM: OMAP1: move omap1_bl pdata out of arch/arm/*

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 2012-08-29 at 02:18 +0300, Igor Grinberg wrote:
> omap1 backlight platform data resides inside plat/board.h while it
> should be inside include/linux/...
> Move the omap1 backlight platform data to
> include/linux/platform_data/.
> 
> Cc: Richard Purdie <rpurdie@xxxxxxxxx>
> Cc: Florian Tobias Schandinat <FlorianSchandinat@xxxxxx>
> Cc: linux-fbdev@xxxxxxxxxxxxxxx
> Signed-off-by: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
> ---
>  arch/arm/mach-omap1/board-osk.c         |    1 +
>  arch/arm/mach-omap1/board-palmte.c      |    1 +
>  arch/arm/mach-omap1/board-palmtt.c      |    1 +
>  arch/arm/mach-omap1/board-palmz71.c     |    1 +
>  arch/arm/plat-omap/include/plat/board.h |    7 -------
>  drivers/video/backlight/omap1_bl.c      |    2 +-
>  include/linux/platform_data/omap1_bl.h  |   11 +++++++++++
>  7 files changed, 16 insertions(+), 8 deletions(-)
>  create mode 100644 include/linux/platform_data/omap1_bl.h
> 
> diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
> index 8784705..569b687 100644
> --- a/arch/arm/mach-omap1/board-osk.c
> +++ b/arch/arm/mach-omap1/board-osk.c
> @@ -39,6 +39,7 @@
>  #include <linux/mtd/partitions.h>
>  #include <linux/mtd/physmap.h>
>  #include <linux/i2c/tps65010.h>
> +#include <linux/platform_data/omap1_bl.h>
>  
>  #include <asm/mach-types.h>
>  #include <asm/mach/arch.h>
> diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
> index 26bcb9d..7bf00ba 100644
> --- a/arch/arm/mach-omap1/board-palmte.c
> +++ b/arch/arm/mach-omap1/board-palmte.c
> @@ -28,6 +28,7 @@
>  #include <linux/interrupt.h>
>  #include <linux/apm-emulation.h>
>  #include <linux/omapfb.h>
> +#include <linux/platform_data/omap1_bl.h>
>  
>  #include <asm/mach-types.h>
>  #include <asm/mach/arch.h>
> diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
> index 4d09944..2cce505 100644
> --- a/arch/arm/mach-omap1/board-palmtt.c
> +++ b/arch/arm/mach-omap1/board-palmtt.c
> @@ -27,6 +27,7 @@
>  #include <linux/omapfb.h>
>  #include <linux/spi/spi.h>
>  #include <linux/spi/ads7846.h>
> +#include <linux/platform_data/omap1_bl.h>
>  
>  #include <asm/mach-types.h>
>  #include <asm/mach/arch.h>
> diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
> index 3559803..45ab9f0 100644
> --- a/arch/arm/mach-omap1/board-palmz71.c
> +++ b/arch/arm/mach-omap1/board-palmz71.c
> @@ -30,6 +30,7 @@
>  #include <linux/omapfb.h>
>  #include <linux/spi/spi.h>
>  #include <linux/spi/ads7846.h>
> +#include <linux/platform_data/omap1_bl.h>
>  
>  #include <asm/mach-types.h>
>  #include <asm/mach/arch.h>
> diff --git a/arch/arm/plat-omap/include/plat/board.h b/arch/arm/plat-omap/include/plat/board.h
> index 5938c72..d0bc46e 100644
> --- a/arch/arm/plat-omap/include/plat/board.h
> +++ b/arch/arm/plat-omap/include/plat/board.h
> @@ -19,13 +19,6 @@ struct omap_lcd_config {
>  	u8   data_lines;
>  };
>  
> -struct device;
> -struct fb_info;
> -struct omap_backlight_config {
> -	int default_intensity;
> -	int (*set_power)(struct device *dev, int state);
> -};
> -
>  /* for TI reference platforms sharing the same debug card */
>  extern int debug_card_init(u32 addr, unsigned gpio);
>  
> diff --git a/drivers/video/backlight/omap1_bl.c b/drivers/video/backlight/omap1_bl.c
> index bfdc5fb..92257ef 100644
> --- a/drivers/video/backlight/omap1_bl.c
> +++ b/drivers/video/backlight/omap1_bl.c
> @@ -27,9 +27,9 @@
>  #include <linux/fb.h>
>  #include <linux/backlight.h>
>  #include <linux/slab.h>
> +#include <linux/platform_data/omap1_bl.h>
>  
>  #include <mach/hardware.h>
> -#include <plat/board.h>
>  #include <plat/mux.h>
>  
>  #define OMAPBL_MAX_INTENSITY		0xff
> diff --git a/include/linux/platform_data/omap1_bl.h b/include/linux/platform_data/omap1_bl.h
> new file mode 100644
> index 0000000..881a8e9
> --- /dev/null
> +++ b/include/linux/platform_data/omap1_bl.h
> @@ -0,0 +1,11 @@
> +#ifndef __OMAP1_BL_H__
> +#define __OMAP1_BL_H__
> +
> +#include <linux/device.h>

You could use struct device; here.

> +
> +struct omap_backlight_config {
> +	int default_intensity;
> +	int (*set_power)(struct device *dev, int state);
> +};
> +
> +#endif

Acked-by: Tomi Valkeinen <tomi.valkeinen@xxxxxx>

 Tomi

Attachment: signature.asc
Description: This is a digitally signed message part


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux