Add pinctrl and d_can device tree data to AM33XX family of devices.
First two patches add support for pinctrl DT data and third one
adds dcan DT data.
Reason behind combining these patches is to apply cleanly on
linux-omap tree, because these are sequential patches.
These patches were tested on AM335x-Bone and AM335x-EVM apply
on linux-omap:master
d_can:
Changes from v3:
- Removed d_can1 node from am335x-evm.dts file. Instance
one of CAN (d_can1) is available on AM335x-EVM only under
a specific CPLD mode selection. am335x-evm.dts does not
support this mode so remove the d_can1 node.
- Dropped d_can pinmux settings patch, above comment
applies here as well.
Changes from v2:
- Incorporated Vaibhav H's comments on v2
* Added dcan0 instances to am33xx.dtsi file
Changes from v1:
- These two patches separated from c_can DT support
patch series.
pinctrl:
Changes from v3:
- Updated the reg length based on latest AM335x TRM.
Changes from v2:
- user led pinmux comments updated according to Tony's
comment.
Changes from v1:
- Rebased the patches based on latest pinctrl-single driver
AnilKumar Ch (3):
arm/dts: AM33XX: Add basic pinctrl device tree data
arm/dts: AM33XX: Configure pinmuxs for user leds control on Bone
arm/dts: AM33XX: Add D_CAN device tree data
arch/arm/boot/dts/am335x-bone.dts | 14 ++++++++++++++
arch/arm/boot/dts/am33xx.dtsi | 27 +++++++++++++++++++++++++++
2 files changed, 41 insertions(+)
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
