On Mon, 2012-08-27 at 11:49 +0530, Archit Taneja wrote: > On Friday 24 August 2012 06:44 PM, Tomi Valkeinen wrote: > > On Tue, 2012-08-21 at 11:28 +0530, Archit Taneja wrote: > >> Create output instances by having an init function in the probes of the platform > >> device drivers for different interfaces. Create a small function for each > >> interface to initialize the output entity's fields type and id. > >> > >> In the probe of each interface driver, the output entities are created before > >> the *_probe_pdata() functions intentionally. This is done to ensure that the > >> output entity is prepared before the panels connected to the output are > >> registered. We need the output entities to be ready because OMAPDSS will try > >> to make connections between overlays, managers, outputs and devices during the > >> panel's probe. > > > > You're referring to the recheck_connections stuff? I have a patch that > > moves that to omapfb side. But of course it doesn't hurt to initialize > > the output early. > > I've seen that patch. omapfb would need to take care of connecting > outputs to displays, and managers to outputs. This is added in > recheck_connections done in a patch #9 of the series. > > The question is whether we want some initial connections made between > outputs and displays by DSS, or should that be left completely to > omapfb/omapdrm? Good question. I don't know. Perhaps we should set initial connections there, as the cases where we have multiple displays per output are quite rare. > > We should generally do the initialization in output driver's probe more > > or less so that we first setup everything related to the output driver, > > and after that we register the dssdevs. But I think that's what is > > already done. > > > > So, no complaints =). > > Another thing that comes up with delaying the recheck_connections stuff > is that we can't assume that at the point of panel driver's probe, there > is an output connected to the display. That makes it a bit tricky to > call an output function in the panel's probe, since it isn't connected > to any output at all. An example is when we request for a VC in > taal_probe. Since the panel isn't connected to any output yet, we can't > really call a dsi function to request for the VC. This particular case > can be solved by requesting VCs only when we enable the panel(probably > makes more sense this way), but there might be other situations which > could get tricky to tackle. Right. Well, as you said, we can easily move the stuff from taal's probe to enable. There shouldn't be any problems to that. However, this problem is part of the bigger problem that I haven't been able to solve properly: how to manage the probe/enable stuff for panels. Everything would be simple and easy if we had just one panel per output, and we could just get and configure everything at probe. But we can have multiple panels per output, of which only one can be used at a time... That's why we currently acquire most of the display resources at enable, instead of probe. Tomi
Attachment:
signature.asc
Description: This is a digitally signed message part
