HDMI requires vdda_hdmi_dac (vdac) power for operation. The regulator,
or the regulator supplying the vdac, has been enabled by default and
things have worked without the HDMI driver enabling the vdac.
I encountered the problem when implementing HDMI device tree support,
where the regulator was not enabled by default.
This patch adds the vdda_hdmi_dac to twl-common.c so that the HDMI
driver can use it.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
Cc: Tony Lindgren <tony@xxxxxxxxxxx>
---
arch/arm/mach-omap2/twl-common.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c
index 119d5a9..bf90356 100644
--- a/arch/arm/mach-omap2/twl-common.c
+++ b/arch/arm/mach-omap2/twl-common.c
@@ -257,6 +257,10 @@ static struct twl4030_usb_data omap4_usb_pdata = {
.phy_suspend = omap4430_phy_suspend,
};
+static struct regulator_consumer_supply omap4_vdda_hdmi_dac_supplies[] = {
+ REGULATOR_SUPPLY("vdda_hdmi_dac", "omapdss_hdmi"),
+};
+
static struct regulator_init_data omap4_vdac_idata = {
.constraints = {
.min_uV = 1800000,
@@ -266,6 +270,8 @@ static struct regulator_init_data omap4_vdac_idata = {
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
+ .num_consumer_supplies = ARRAY_SIZE(omap4_vdda_hdmi_dac_supplies),
+ .consumer_supplies = omap4_vdda_hdmi_dac_supplies,
.supply_regulator = "V2V1",
};
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
