On 08/22/2012 11:19 PM, Andreas Kemnade wrote: > if I understand the TRM correctly, according to Figure 21-26 in chapter 21.4.2.3. > if GSYNC is set, the receiver uses the signal from the sample rate generator, > so CLKX does not need to be the CLKR source. > But I tried also with the DEVCONF0 MCBSP1_CLKR bit as you proposed. > I tried > snd_soc_dai_set_sysclk(cpu_dai, OMAP_MCBSP_CLKR_SRC_CLKX, 0, > SND_SOC_CLOCK_OUT); > snd_soc_dai_set_sysclk(cpu_dai, OMAP_MCBSP_FSR_SRC_FSX, 0, > SND_SOC_CLOCK_OUT); There is an issue with the 6pin mux code, try to add this patch: http://mailman.alsa-project.org/pipermail/alsa-devel/2012-August/054041.html > That is why I send you my patch about that mux settings. But I had no success. > The CLKX as CLKR source and FSX as FSR source setting I have only seen when > mcbsp1 is used in slave mode. If you know any working code which uses mcbsp1 in > master mode then let me know. No, I don't have board which uses McBSP1. -- Péter -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
