On 25.07.2012 14:43, Sergei Shtylyov wrote:
> Hello.
>
> On 25-07-2012 16:23, AnilKumar Ch wrote:
>
>> Add Bosch D_CAN controller device tree data to AM33XX dtsi file
>> by adding d_can device node with all the necessary parameters.
>
>> Signed-off-by: AnilKumar Ch <anilkumar@xxxxxx>
>> ---
>> arch/arm/boot/dts/am33xx.dtsi | 5 +++++
>> 1 file changed, 5 insertions(+)
>
>> diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
>> index 9b974dc..2db2ffb 100644
>> --- a/arch/arm/boot/dts/am33xx.dtsi
>> +++ b/arch/arm/boot/dts/am33xx.dtsi
>> @@ -163,5 +163,10 @@
>> #size-cells = <0>;
>> ti,hwmods = "i2c3";
>> };
>> +
>> + dcan1: d_can@481D0000 {
>
> Address postfix in the node name and no "reg" property?
This still works due to the hwmod mappings OMAP relies on. I would still
put it there, so the switch to real DT definitions will be less painful.
Daniel
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
