On Tue, Jul 17, 2012 at 11:28 PM, Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx> wrote:
> On Tue, Jul 17, 2012 at 10:37:45PM +0530, Shilimkar, Santosh wrote:
>> On Tue, Jul 17, 2012 at 10:06 PM, Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx> wrote:
>> > On Mon, Jul 09, 2012 at 07:02:36PM +0530, Shilimkar, Santosh wrote:
>> >> Greg,
>> >>
[..]
>> >From 74688a87fd490909e9122bf757c0096480e9fc11 Mon Sep 17 00:00:00 2001
>> From: Aneesh V <aneesh@xxxxxx>
>> Date: Mon, 30 Jan 2012 20:06:30 +0530
>> Subject: [PATCH 4/4] memory: emif: add device tree support to emif driver
>>
>> Device tree support for the EMIF driver. LPDDR2 generic timings
>> extraction from device is managed using couple of helper
>> functions which can be used by other memory controller
>> drivers.
>>
>> Reviewed-by: Benoit Cousson <b-cousson@xxxxxx>
>> Reviewed-by: Grant Likely <grant.likely@xxxxxxxxxxxx>
>> Tested-by: Lokesh Vutla <lokeshvutla@xxxxxx>
>> Signed-off-by: Aneesh V <aneesh@xxxxxx>
>> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
>> Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
>> ---
>> drivers/memory/Makefile | 1 +
>> drivers/memory/emif.c | 182 +++++++++++++++++++++++++++++++++++++++++++-
>> drivers/memory/of_memory.c | 153 +++++++++++++++++++++++++++++++++++++
>> drivers/memory/of_memory.h | 36 +++++++++
>> 4 files changed, 371 insertions(+), 1 deletion(-)
>> create mode 100644 drivers/memory/of_memory.c
>> create mode 100644 drivers/memory/of_memory.h
>>
>> diff --git a/drivers/memory/Makefile b/drivers/memory/Makefile
>> index 42b3ce9..cd8486b 100644
>> --- a/drivers/memory/Makefile
>> +++ b/drivers/memory/Makefile
>> @@ -2,6 +2,7 @@
>> # Makefile for memory devices
>> #
>>
>> +obj-$(CONFIG_OF) += of_memory.o
>> obj-$(CONFIG_TI_EMIF) += emif.o
>> obj-$(CONFIG_TEGRA20_MC) += tegra20-mc.o
>> obj-$(CONFIG_TEGRA30_MC) += tegra30-mc.o
>> diff --git a/drivers/memory/emif.c b/drivers/memory/emif.c
>> index 33a4396..06b4eb7 100644
>> --- a/drivers/memory/emif.c
>> +++ b/drivers/memory/emif.c
>> @@ -18,6 +18,7 @@
>> #include <linux/platform_device.h>
>> #include <linux/interrupt.h>
>> #include <linux/slab.h>
>> +#include <linux/of.h>
>> #include <linux/debugfs.h>
>> #include <linux/seq_file.h>
>> #include <linux/module.h>
>> @@ -25,6 +26,7 @@
>> #include <linux/spinlock.h>
>> #include <memory/jedec_ddr.h>
>> #include "emif.h"
>> +#include "of_memory.h"
>>
>> /**
>> * struct emif_data - Per device static data for driver's use
>> @@ -49,6 +51,7 @@
>> * frequency in effect at the moment)
>> * @plat_data: Pointer to saved platform data.
>> * @debugfs_root: dentry to the root folder for EMIF in debugfs
>> + * @np_ddr: Pointer to ddr device tree node
>> */
>> struct emif_data {
>> u8 duplicate;
>> @@ -63,6 +66,7 @@ struct emif_data {
>> struct emif_regs *curr_regs;
>> struct emif_platform_data *plat_data;
>> struct dentry *debugfs_root;
>> + struct device_node *np_ddr;
>> };
>>
>> static struct emif_data *emif1;
>> @@ -1148,6 +1152,168 @@ static int is_custom_config_valid(struct
>> emif_custom_configs *cust_cfgs,
>> return valid;
>> }
>>
>> +#if defined(CONFIG_OF)
>> +static void __init_or_module of_get_custom_configs(struct device_node *np_emif,
>> + struct emif_data *emif)
>
> Why can't all of this code be in the of_memory.c file?
>
Primarily because the parameters are very much specific to EMIF
memory controller and won't be of much use for other memory controllers.
Currently the information extracted from DT with these function is like:
- EMIF controller IP version : EMIF_4D or EMIF_4D5
- Which analog phy is integrated : EMIF_ATTILAPHY or EMIF_ATTILAPHY
- IP hardware interface: EMIF Low latency port or sys port interface.
- EMIF connections - Whether EMIF1 only, EMIF2 only or EMIF1 & EMIF2
- Memory connections to EMIF - Same type and size memories or asymmetric
- Chip select usage per controller: Whether CS0, CS1, CS0 & CS1
- ZQ calibration - Per chip select or enable EMIF dual calibration feature.
- Enable/disable EMIF Low power mode and temperature alerts.
- EMIF low power mode configuration:
- Clock stop, self refresh, Deep power down.
- Low power time out values for performance and power mode.
- DDR frequency threshold to switch between power and
performance settings.
- EMIF temperature polling cycle configuration.
As you can see these are very specific to the EMIF memory controller and hence
I didn't move them to of_memory.c
>> +static struct emif_data * __init_or_module of_get_device_details(
>> + struct device_node *np_emif, struct device *dev)
>
> of_get_memory_device_details()?
>
Right. Will rename it as you suggested.
>> +{
>> + struct emif_data *emif = NULL;
>> + struct ddr_device_info *dev_info = NULL;
>> + struct emif_platform_data *pd = NULL;
>> + struct device_node *np_ddr;
>> + int len;
>> +
>> + np_ddr = of_parse_phandle(np_emif, "device-handle", 0);
>> + if (!np_ddr)
>> + goto error;
>> + emif = devm_kzalloc(dev, sizeof(struct emif_data), GFP_KERNEL);
>> + pd = devm_kzalloc(dev, sizeof(*pd), GFP_KERNEL);
>> + dev_info = devm_kzalloc(dev, sizeof(*dev_info), GFP_KERNEL);
>> +
>> + if (!emif || !pd || !dev_info) {
>> + dev_err(dev, "%s: of_get_device_details() failure!!\n",
>> + __func__);
>
> Look at what that error message just printed out. Redundancy is nice,
> but come on, that's not ok :)
>
Agree. The error message should have been some thing like
"Out of memory". Will fix this in next version.
Regards
Santosh
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
