On Thursday 28 June 2012 05:21 PM, Kishon Vijay Abraham I wrote:
Add twl4030-usb data node in twl4030 device tree file.
Signed-off-by: Kishon Vijay Abraham I<kishon@xxxxxx>
---
arch/arm/boot/dts/twl4030.dtsi | 21 +++++++++++++++++++++
1 files changed, 21 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/twl4030.dtsi b/arch/arm/boot/dts/twl4030.dtsi
index 22f4d13..66534a3 100644
--- a/arch/arm/boot/dts/twl4030.dtsi
+++ b/arch/arm/boot/dts/twl4030.dtsi
@@ -37,6 +37,18 @@
regulator-max-microvolt =<3150000>;
};
+ vusb1v5: regulator@3 {
+ compatible = "ti,twl4030-vusb1v5";
+ };
These @3, @4 are actually wrong since the node do
not have a 'reg' property in it. This was commented on
by David Brown on my original series which added this but
it somehow slipped through the cracks. I understand that
you would have looked up what existed in the file and
extended, but what already exists in the file needs to
be fixed up too. I'll send in a patch to fix those up.
regards,
Rajendra
+
+ vusb1v8: regulator@4 {
+ compatible = "ti,twl4030-vusb1v8";
+ };
+
+ vusb3v1: regulator@5 {
+ compatible = "ti,twl4030-vusb3v1";
+ };
+
twl_gpio: gpio {
compatible = "ti,twl4030-gpio";
gpio-controller;
@@ -44,4 +56,13 @@
interrupt-controller;
#interrupt-cells =<1>;
};
+
+ twl4030-usb {
+ compatible = "ti,twl4030-usb";
+ interrupts =< 10 4>;
+ usb1v5-supply =<&vusb1v5>;
+ usb1v8-supply =<&vusb1v8>;
+ usb3v1-supply =<&vusb3v1>;
+ usb_mode =<1>;
+ };
};
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
