Kevin Hilman <khilman@xxxxxx> writes: > Keshava Munegowda <keshava_mgowda@xxxxxx> writes: > >> The usb host is disabled in the omap2 build; This is because >> usb host is causing the retention to break in cpu idle. > > ... and causes warnings during boot, and hangs in suspend, can't suspend > using NFSroot, etc. etc. > > Thank you for disabling this by default, But I don't think this fix > is targetted enough (more below.) > > Tony, when v3.5 came out, I asked them to fix this properly, but nothing > was done. So I've resorted to requesting that this feature be disabled > by default since it introduced PM regressions. Of course, I'd like to > see this fixed properly instead, but we've run out of time for v3.5 and > IMO, this PM regression needs to be fixed for v3.5. See my more > targetted patches below. > >> Signed-off-by: Keshava Munegowda <keshava_mgowda@xxxxxx> >> --- >> arch/arm/configs/omap2plus_defconfig | 11 ----------- >> 1 file changed, 11 deletions(-) >> >> diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig >> index 9854ff4..7b32da6 100644 >> --- a/arch/arm/configs/omap2plus_defconfig >> +++ b/arch/arm/configs/omap2plus_defconfig >> @@ -170,17 +170,6 @@ CONFIG_SND_USB_AUDIO=m >> CONFIG_SND_SOC=m >> CONFIG_SND_OMAP_SOC=m >> CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=m >> -CONFIG_USB=y >> -CONFIG_USB_DEBUG=y >> -CONFIG_USB_ANNOUNCE_NEW_DEVICES=y >> -CONFIG_USB_DEVICEFS=y >> -CONFIG_USB_SUSPEND=y >> -CONFIG_USB_MON=y >> -CONFIG_USB_EHCI_HCD=y >> -CONFIG_USB_WDM=y >> -CONFIG_USB_STORAGE=y >> -CONFIG_USB_LIBUSUAL=y >> -CONFIG_USB_TEST=y > > Why disable all of these? With that, it's not terribly clear what is > going on, or why. > > Instead, what you need is a targetted fix to just disable the problem > driver by default: > > Either this: > > diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig > index 9854ff4..11828e6 100644 > --- a/arch/arm/configs/omap2plus_defconfig > +++ b/arch/arm/configs/omap2plus_defconfig > @@ -176,7 +176,6 @@ CONFIG_USB_ANNOUNCE_NEW_DEVICES=y > CONFIG_USB_DEVICEFS=y > CONFIG_USB_SUSPEND=y > CONFIG_USB_MON=y > -CONFIG_USB_EHCI_HCD=y > CONFIG_USB_WDM=y > CONFIG_USB_STORAGE=y > CONFIG_USB_LIBUSUAL=y > > or this: > > diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig > index e129c82..3747826 100644 > --- a/drivers/mfd/Kconfig > +++ b/drivers/mfd/Kconfig > @@ -825,7 +825,7 @@ config MFD_WL1273_CORE > config MFD_OMAP_USB_HOST > bool "Support OMAP USBHS core driver" > depends on USB_EHCI_HCD_OMAP || USB_OHCI_HCD_OMAP3 > - default y > + default n > help > This is the core driver for the OAMP EHCI and OHCI drivers. > This MFD driver does the required setup functionalities for > > Will have the inteded affect with the benefit of being much clearer > about what is actually being disabled, and why. Since I'm primarily concerned about automated PM testing of omap2plus_defconfig, I think the first one is better since it just affects the default omap2plus_defconfig and allows custom defconfigs to continue to work as usual. I'll send a patch. Kevin -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
