The following series adds some code to generate legal, locally administered
MAC addresses from OMAP4 CPU Die ID fuse data, and then adds a helper at
net/ethernet taking care of accepting device path / MAC mapping registrations
and running a notifier to enforce the requested MAC when the matching network
device turns up.
On PandaBoard / ES, two devices have no board-level MAC either assigned by
the manufacturer or stored on the board, the last patch in the series adds
these device paths and gets them set when the network device is registered.
Lastly for convenient testing, there's a little patch on omap2plus_defconfig
that will get Ethernet and WLAN up on Pandaboard.
The patches are against today's linux-omap.
Thanks to Tony Lindgren and Arnd Bergmann for comments leading to the
helper in net/ethernet.
---
Andy Green (4):
OMAP: add cpu id register to MAC address helper
NET ethernet introduce mac_platform helper
OMAP4 PANDA register ethernet and wlan for automatic mac allocation
config test config extending omap2plus with wl12xx etc
arch/arm/configs/omap2plus_defconfig | 35 +++----
arch/arm/mach-omap2/Kconfig | 1
arch/arm/mach-omap2/board-omap4panda.c | 30 ++++++
arch/arm/mach-omap2/id.c | 39 ++++++++
arch/arm/mach-omap2/include/mach/id.h | 1
include/net/mac-platform.h | 39 ++++++++
net/Kconfig | 5 +
net/ethernet/Makefile | 3 +
net/ethernet/mac-platform.c | 151 ++++++++++++++++++++++++++++++++
9 files changed, 282 insertions(+), 22 deletions(-)
create mode 100644 include/net/mac-platform.h
create mode 100644 net/ethernet/mac-platform.c
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
