On 07/02/2012 01:07 PM, Kevin Hilman wrote: > + Neil Brown > > Hi Jon, > > Jon Hunter <jon-hunter@xxxxxx> writes: > >> Currently the gpio _runtime_resume/suspend functions are calling the >> get_context_loss_count() platform function if the function is populated for >> a gpio bank. This function is used to determine if the gpio bank logic state >> needs to be restored due to a power transition. This function will be populated >> for all banks, but it should only be called for banks that have the >> "loses_context" variable set. It is pointless to call this if loses_context is >> false as we know the context will never be lost and will not need restoring. >> >> For all OMAP2+ devices gpio bank-0 is in an always-on power domain and so will >> never lose context. We found that the get_context_loss_count() was being called >> for bank-0 during the probe and returning 1 instead of 0 indicating that the >> context had been lost. This was causing the context restore function to be >> called at probe time for this bank and because the context had never been saved, >> was restoring an invalid state. This ultimately resulted in a crash [1]. >> >> There are multiple bugs here that need to be addressed ... >> >> 1. Why the always-on power domain returns a context loss count of 1? This needs >> to be fixed in the power domain code. However, the gpio driver should not >> assume the loss count is 0 to begin with. >> 2. The omap gpio driver should never be calling get_context_loss_count for a >> gpio bank in a always-on domain. This is pointless and adds unneccessary >> overhead. >> 3. The OMAP gpio driver assumes that the initial power domain context loss count >> will be 0 at the time the gpio driver is probed. However, it could be >> possible that this is not the case and an invalid context restore could be >> performed during the probe. To avoid this otherwise only populated the > > The 'To avoid this...' sentence here doesn't read well. Looks like you > need to: > > s/otherwise// Yes, I meant to have dropped "otherwise" here. Thanks! > s/populated/populate/ Yes that too! I must have re-worded and screwed it up royally :-( > ? > >> get_context_loss_count() function pointer after the initial call to >> pm_runtime_get() has occurred. This will ensure that the first >> pm_runtime_put() initialised the loss count correctly. >> >> This patch addresses issues 2 and 3 above. >> [1] http://marc.info/?l=linux-omap&m=134065775323775&w=2 >> >> Cc: Grant Likely <grant.likely@xxxxxxxxxxxx> >> Cc: Linus Walleij <linus.walleij@xxxxxxxxxxxxxx> >> Cc: Kevin Hilman <khilman@xxxxxx> >> Cc: Tarun Kanti DebBarma <tarun.kanti@xxxxxx> >> Cc: Franky Lin <frankyl@xxxxxxxxxxxx> >> >> Reported-by: Franky Lin <frankyl@xxxxxxxxxxxx> >> Signed-off-by: Jon Hunter <jon-hunter@xxxxxx> > > Thanks for digging inot this bug Jon. The same bug was brought up by > Neil Brown (Cc'd) in a different thread. > > Neil, it looks to me that this fix will address the problems you were > seeing as well. Care to test, and respond with your ack/tested-by if it > works for you? Thanks. Neil let me know your thoughts and if you are ok, I can clean-up the changelog and re-send. Cheers Jon -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html