The TLL configuration is removed from the UHH driver and implemented as
a seperate platform driver. Now, the UHH driver configures the TLL
through API's exported by the TLL platform driver. The TLL is an
has independent hardware mod structure for in OMAP3 and later chips,
hence an dedicated platform driver is created.
Signed-off-by: Keshava Munegowda <keshava_mgowda@xxxxxx>
In v3:
- rebased on top V3 of Russ dill's patch
'ARM: OMAP3: USB: Fix the EHCI ULPI PHY reset issue'
fixes an issue where the ULPI PHYs were not held in reset
while initializing the EHCI controller
http://permalink.gmane.org/gmane.linux.usb.general/65988
- rebased on top of patch
OMAP: USB : Fix the EHCI enumeration and core retention issue
http://permalink.gmane.org/gmane.linux.usb.general/66239
In V2:
- covered review comments from linux omap and usb community
- rebased on top Russ dill's patch
'ARM: OMAP3: USB: Fix the EHCI ULPI PHY reset issue'
fixes an issue where the ULPI PHYs were not held in reset
while initializing the EHCI controller
Keshava Munegowda (5):
ARM: OMAP: USB: HOST TLL platform driver
ARM: OMAP: USB: Build the USB HOST TLL omap device
ARM: OMAP: USB: Remove TLL specific code
ARM: OMAP: USB: Invoke the TLL driver from USB HS core driver
ARM: OMAP: change the USB TLL clocks device name
arch/arm/mach-omap2/clock3xxx_data.c | 8 +-
arch/arm/mach-omap2/clock44xx_data.c | 4 +-
arch/arm/mach-omap2/usb-host.c | 31 ++-
arch/arm/plat-omap/include/plat/usb.h | 7 +
drivers/mfd/Kconfig | 2 +-
drivers/mfd/Makefile | 2 +-
drivers/mfd/omap-usb-host.c | 238 ++---------------
drivers/mfd/omap-usb-tll.c | 471 +++++++++++++++++++++++++++++++++
8 files changed, 523 insertions(+), 240 deletions(-)
create mode 100644 drivers/mfd/omap-usb-tll.c
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
