On 06/29/2012 10:35 PM, Paul Walmsley wrote:
+ Benoît who is the maintainer of this file
+ the linux-arm-kernel mailing list, which should be cc'ed on all OMAP
patches
On Fri, 29 Jun 2012, Ruslan Bilovol wrote:
From: Wenbiao Wang <wwang@xxxxxx>
OTG clock usb_otg_hs_ick used a incorrect parent l3_div_ck.
Correct it to use the right colck otg_60m_gfclk as its
parent.
Mmm, that does not seems to be correct.
otg_60m_gfclk is an optional clock. The interface clock is the main
clock of that module. That's why this is the parent of the fake
MODULEMODE clock node.
Moreover you are changing as well the utmi_phy_clkout_ck. That's not
mentioned at all in the changelog.
I know that there are some non standard stuff in this clock scheme.
The main reason being the utmi_phy_clkout_ck source is generated from
the usb_phy module. Unfortunately the clock fmwk cannot handle module as
a clock node.
So, as of today, this only way to get the OTG_60M_FCLK clock available
is to ensure that the usb_phy module is enabled before the usb_otg_hs
module.
Regards,
Benoit
Signed-off-by: Wenbiao Wang <wwang@xxxxxx>
Signed-off-by: Ruslan Bilovol <ruslan.bilovol@xxxxxx>
---
arch/arm/mach-omap2/clock44xx_data.c | 15 ++++++++-------
1 files changed, 8 insertions(+), 7 deletions(-)
diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c
index b825049..fd43214 100644
--- a/arch/arm/mach-omap2/clock44xx_data.c
+++ b/arch/arm/mach-omap2/clock44xx_data.c
@@ -199,12 +199,6 @@ static struct clk tie_low_clock_ck = {
.ops = &clkops_null,
};
-static struct clk utmi_phy_clkout_ck = {
- .name = "utmi_phy_clkout_ck",
- .rate = 60000000,
- .ops = &clkops_null,
-};
-
static struct clk xclk60mhsp1_ck = {
.name = "xclk60mhsp1_ck",
.rate = 60000000,
@@ -992,6 +986,13 @@ static struct clk dpll_usb_clkdcoldo_ck = {
.recalc = &followparent_recalc,
};
+static struct clk utmi_phy_clkout_ck = {
+ .name = "utmi_phy_clkout_ck",
+ .ops = &clkops_null,
+ .parent = &dpll_usb_clkdcoldo_ck,
+ .recalc = &followparent_recalc,
+};
+
static const struct clksel dpll_usb_m2_div[] = {
{ .parent = &dpll_usb_ck, .rates = div31_1to31_rates },
{ .parent = NULL },
@@ -2685,7 +2686,7 @@ static struct clk usb_otg_hs_ick = {
.enable_reg = OMAP4430_CM_L3INIT_USB_OTG_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_HWCTRL,
.clkdm_name = "l3_init_clkdm",
- .parent = &l3_div_ck,
+ .parent = &otg_60m_gfclk,
.recalc = &followparent_recalc,
};
Benoît should have a look at this one, I think.
- Paul
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
