Hsync, Vsync, Data enable enable logic levels and latching info of Data lanes,
Hsync and Vsync signals(with respect to pixel clock) are newly added parameters
in omap_video_timings.
Program these in dispc_mgr_set_lcd_timings. These will be configured when the
manager's timings are set via dss_mgr_set_timings().
Signed-off-by: Archit Taneja <archit@xxxxxx>
---
drivers/video/omap2/dss/dispc.c | 43 ++++++++++++++++++++++++++++++++++++---
1 file changed, 40 insertions(+), 3 deletions(-)
diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index d974be9..184d37b 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -2620,9 +2620,16 @@ bool dispc_mgr_timings_ok(enum omap_channel channel,
}
static void _dispc_mgr_set_lcd_timings(enum omap_channel channel, int hsw,
- int hfp, int hbp, int vsw, int vfp, int vbp)
+ int hfp, int hbp, int vsw, int vfp, int vbp,
+ enum omap_dss_signal_level vsync_level,
+ enum omap_dss_signal_level hsync_level,
+ enum omap_dss_signal_level pclk_edge,
+ enum omap_dss_signal_level de_level,
+ enum omap_dss_signal_edge hsync_vsync_edge)
+
{
- u32 timing_h, timing_v;
+ u32 timing_h, timing_v, l;
+ bool onoff, rf;
if (cpu_is_omap24xx() || omap_rev() < OMAP3430_REV_ES3_0) {
timing_h = FLD_VAL(hsw-1, 5, 0) | FLD_VAL(hfp-1, 15, 8) |
@@ -2640,6 +2647,32 @@ static void _dispc_mgr_set_lcd_timings(enum omap_channel channel, int hsw,
dispc_write_reg(DISPC_TIMING_H(channel), timing_h);
dispc_write_reg(DISPC_TIMING_V(channel), timing_v);
+
+ switch (hsync_vsync_edge) {
+ case OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES:
+ onoff = false;
+ rf = false;
+ break;
+ case OMAPDSS_DRIVE_SIG_FALLING_EDGE:
+ onoff = true;
+ rf = false;
+ break;
+ case OMAPDSS_DRIVE_SIG_RISING_EDGE:
+ onoff = true;
+ rf = true;
+ break;
+ default:
+ BUG();
+ };
+
+ l = dispc_read_reg(DISPC_POL_FREQ(channel));
+ l |= FLD_VAL(onoff, 17, 17);
+ l |= FLD_VAL(rf, 16, 16);
+ l |= FLD_VAL(de_level, 15, 15);
+ l |= FLD_VAL(pclk_edge, 14, 14);
+ l |= FLD_VAL(hsync_level, 13, 13);
+ l |= FLD_VAL(vsync_level, 12, 12);
+ dispc_write_reg(DISPC_POL_FREQ(channel), l);
}
/* change name to mode? */
@@ -2659,7 +2692,8 @@ void dispc_mgr_set_timings(enum omap_channel channel,
if (dispc_mgr_is_lcd(channel)) {
_dispc_mgr_set_lcd_timings(channel, t.hsw, t.hfp, t.hbp, t.vsw,
- t.vfp, t.vbp);
+ t.vfp, t.vbp, t.vsync_level, t.hsync_level,
+ t.pclk_edge, t.de_level, t.hsync_vsync_edge);
xtot = t.x_res + t.hfp + t.hsw + t.hbp;
ytot = t.y_res + t.vfp + t.vsw + t.vbp;
@@ -2670,6 +2704,9 @@ void dispc_mgr_set_timings(enum omap_channel channel,
DSSDBG("pck %u\n", timings->pixel_clock);
DSSDBG("hsw %d hfp %d hbp %d vsw %d vfp %d vbp %d\n",
t.hsw, t.hfp, t.hbp, t.vsw, t.vfp, t.vbp);
+ DSSDBG("vsync_level %d hsync_level %d pclk_edge %d de_level %d hsync_vsync_edge %d\n",
+ t.vsync_level, t.hsync_level, t.pclk_edge, t.de_level,
+ t.hsync_vsync_edge);
DSSDBG("hsync %luHz, vsync %luHz\n", ht, vt);
} else {
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
