Adding linux-arm ML. Jon On 06/25/2012 12:38 PM, Jon Hunter wrote: > OMAP4470 currently fails to boot, printing various messages such as ... > > omap_hwmod: mpu: cannot clk_get main_clk dpll_mpu_m2_ck > omap_hwmod: mpu: cannot _init_clocks > ------------[ cut here ]------------ > WARNING: at arch/arm/mach-omap2/omap_hwmod.c:2062 _init+0x2a0/0x2e4() > omap_hwmod: mpu: couldn't init clocks > Modules linked in: > [<c001c7fc>] (unwind_backtrace+0x0/0xf4) from [<c0043c64>] (warn_slowpath_common+0x4c/0x64) > [<c0043c64>] (warn_slowpath_common+0x4c/0x64) from [<c0043d10>] (warn_slowpath_fmt+0x30/0x40) > [<c0043d10>] (warn_slowpath_fmt+0x30/0x40) from [<c0674208>] (_init+0x2a0/0x2e4) > [<c0674208>] (_init+0x2a0/0x2e4) from [<c067428c>] (omap_hwmod_setup_one+0x40/0x60) > [<c067428c>] (omap_hwmod_setup_one+0x40/0x60) from [<c0674280>] (omap_hwmod_setup_one+0x34/0x60) > [<c0674280>] (omap_hwmod_setup_one+0x34/0x60) from [<c06726f4>] (omap_dm_timer_init_one+0x30/0x250) > [<c06726f4>] (omap_dm_timer_init_one+0x30/0x250) from [<c0672930>] (omap2_gp_clockevent_init+0x1c/0x108) > [<c0672930>] (omap2_gp_clockevent_init+0x1c/0x108) from [<c0672c60>] (omap4_timer_init+0x10/0x5c) > [<c0672c60>] (omap4_timer_init+0x10/0x5c) from [<c066c418>] (time_init+0x20/0x30) > [<c066c418>] (time_init+0x20/0x30) from [<c0668814>] (start_kernel+0x1b0/0x304) > [<c0668814>] (start_kernel+0x1b0/0x304) from [<80008044>] (0x80008044) > ---[ end trace 1b75b31a2719ed1c ]--- > > The problem is that currently none of the clocks are being registered for > OMAP4470 devices and so on boot-up no clocks can be found and the kernel panics. > > This fix allows the kernel to boot without failure using a simple RAMDISK file > system on OMAP4470 blaze board. > > V2: > - Per feedback from Paul and Benoit the 4470 clock data is incomplete for new > modules such as the 2D graphics block that has been added to the 4470. > Therefore add a warning to indicate that the clock data is incomplete. > > Cc: Paul Walmsley <paul@xxxxxxxxx> > Cc: Benoit Cousson <b-cousson@xxxxxx> > > Signed-off-by: Jon Hunter <jon-hunter@xxxxxx> > --- > arch/arm/mach-omap2/clock44xx_data.c | 5 ++++- > 1 file changed, 4 insertions(+), 1 deletion(-) > > diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c > index b825049..de53b70 100644 > --- a/arch/arm/mach-omap2/clock44xx_data.c > +++ b/arch/arm/mach-omap2/clock44xx_data.c > @@ -3407,9 +3407,12 @@ int __init omap4xxx_clk_init(void) > if (cpu_is_omap443x()) { > cpu_mask = RATE_IN_4430; > cpu_clkflg = CK_443X; > - } else if (cpu_is_omap446x()) { > + } else if (cpu_is_omap446x() || cpu_is_omap447x()) { > cpu_mask = RATE_IN_4460 | RATE_IN_4430; > cpu_clkflg = CK_446X | CK_443X; > + > + if (cpu_is_omap447x()) > + pr_warn("WARNING: OMAP4470 clock data incomplete!\n"); > } else { > return 0; > } > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html