Re: [PATCH] OMAP: USB : Fix the EHCI enumeration and core retention issue

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



"Munegowda, Keshava" <keshava_mgowda@xxxxxx> writes:

[...]

>>>
>>> hi kevin
>>>
>>> here is pm count log on beagle XM with the above patch:
>>
>> What are you meaning to show by this log?
>>
>> This dump shows that neither PER or CORE are hitting retention in idle.
>> Which sounds to me like you have not enabled UART runtime suspend:
>>
>> echo 3000 > /sys/devices/platform/omap_uart.0/power/autosuspend_delay_ms
>> echo 3000 > /sys/devices/platform/omap_uart.1/power/autosuspend_delay_ms
>> echo 3000 > /sys/devices/platform/omap_uart.2/power/autosuspend_delay_ms
>> echo 3000 > /sys/devices/platform/omap_uart.3/power/autosuspend_delay_ms
>>
>> My test with your patch shows that it fixes the oops during boot, and
>> doesn't hang during suspend, but that USB host is still preventing CORE
>> retention during idle (after UART runtime suspend is enabled.)
>>
>> This happens on 3530/Overo, 3630/Beagle-xM and 3730/Overo
>>
>> Setting CONFIG_MFD_OMAP_USB_HOST=n allows CORE to hit retention again.
>>
>> Kevin
>
>
>
> Hi kevin
>        It woks. only the log was wrong. I was using no_console_suspend
> in boot args.
> i removed it. now I can see the core retention hits with USB host in Beagle XM.
> below is the log:
>

You are not reading what I write.

To repeat: your patch fixes the oops during boot, and the suspend hang
and now I see CORE hit retention in *suspend*.

However,  CORE does still not hit retention during *idle*.

Setting CONFIG_MFD_OMAP_USB_HOST=n allows CORE to hit retention again.

Please investgate the *idle* problems caused by this driver.  

As I said way back in the beginning this thread.  The runtime PM of this
driver is leaving the device enabled.

To test idle retention, ensure the UART auto-suspend is enable for all
UARTS:

echo 3000 > /sys/devices/platform/omap_uart.0/power/autosuspend_delay_ms
echo 3000 > /sys/devices/platform/omap_uart.1/power/autosuspend_delay_ms
echo 3000 > /sys/devices/platform/omap_uart.2/power/autosuspend_delay_ms
echo 3000 > /sys/devices/platform/omap_uart.3/power/autosuspend_delay_ms

Then wait > 3 seconds and 'cat /debug/pm_debug/count'.  

Kevin
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux