The beagleboard USB Host Port that is used is Port 2. The platform driver sets MODE_PHY for port 1 causing pin muxing to override the pins on the expansion
connector P17 when using board_mux[]. Since USBHS Port 1 is not connected remove the case for muxing the USB Port1 pins by default.
Patch is based off of 3.5-rc2 from ASoC for-next branch
Tested with BeagleBoard xM revC and checked the userguides for Beagle xM and revC to be sure USB Port2 is what is used.
Signed-off-by: Brian Austin <brian.austin@xxxxxxxxxx>
---
arch/arm/mach-omap2/board-omap3beagle.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 79c6909..75eb88a 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -435,7 +435,7 @@ static struct platform_device *omap3_beagle_devices[] __initdata = {
static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
- .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
+ .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
