This patch exposes OMAP4 thermal sensor as a thermal zone
named "cpu". Only thermal creation is done here.
TODO:
- Add cooling bindings
- Add extrapolation rules
Signed-off-by: Eduardo Valentin <eduardo.valentin@xxxxxx>
---
drivers/thermal/Kconfig | 12 ++++++
drivers/thermal/Makefile | 1
drivers/thermal/omap-bandgap.c | 1
drivers/thermal/omap-bandgap.h | 12 ++++++
drivers/thermal/omap4-thermal.c | 72 ++++++++++++++++++++++++++++++++++++++++
5 files changed, 98 insertions(+)
Index: linux-2.6/drivers/thermal/Kconfig
===================================================================
--- linux-2.6.orig/drivers/thermal/Kconfig
+++ linux-2.6/drivers/thermal/Kconfig
@@ -38,3 +38,15 @@ config OMAP_BANDGAP
This includes alert interrupts generation and also the TSHUT
support.
+config OMAP4_THERMAL
+ bool "Texas Instruments OMAP4 thermal support"
+ depends on OMAP_BANDGAP
+ depends on ARCH_OMAP4
+ help
+ If you say yes here you get thermal support for the Texas Instruments
+ OMAP4 SoC family. The current chip supported are:
+ - OMAP4460
+
+ This includes alert interrupts generation and also the TSHUT
+ support.
+
Index: linux-2.6/drivers/thermal/Makefile
===================================================================
--- linux-2.6.orig/drivers/thermal/Makefile
+++ linux-2.6/drivers/thermal/Makefile
@@ -6,3 +6,4 @@ obj-$(CONFIG_THERMAL) += thermal_sys.o
obj-$(CONFIG_SPEAR_THERMAL) += spear_thermal.o
obj-$(CONFIG_OMAP_BANDGAP) += omap-thermal.o
omap-thermal-y := omap-bandgap.o
+omap-thermal-$(CONFIG_OMAP4_THERMAL) += omap4-thermal.o
Index: linux-2.6/drivers/thermal/omap-bandgap.c
===================================================================
--- linux-2.6.orig/drivers/thermal/omap-bandgap.c
+++ linux-2.6/drivers/thermal/omap-bandgap.c
@@ -1213,6 +1213,7 @@ static const struct omap_bandgap_data om
.fclock_name = "bandgap_ts_fclk",
.div_ck_name = "div_ts_ck",
.conv_table = omap4460_adc_to_temp,
+ .expose_sensor = omap4_thermal_expose_sensor,
.irq = 126,
.sensors = {
{
Index: linux-2.6/drivers/thermal/omap-bandgap.h
===================================================================
--- linux-2.6.orig/drivers/thermal/omap-bandgap.h
+++ linux-2.6/drivers/thermal/omap-bandgap.h
@@ -61,4 +61,16 @@ int omap_bandgap_write_update_interval(s
int omap_bandgap_read_temperature(struct omap_bandgap *bg_ptr, int id,
int *temperature);
+#ifdef CONFIG_OMAP4_THERMAL
+int omap4_thermal_expose_sensor(struct omap_bandgap *bg_ptr, int id,
+ char *domain);
+#else
+static inline int omap4_thermal_expose_sensor(struct omap_bandgap *bg_ptr,
+ int id, char *domain)
+{
+ return 0;
+}
+
+#endif
+
#endif
Index: linux-2.6/drivers/thermal/omap4-thermal.c
===================================================================
--- /dev/null
+++ linux-2.6/drivers/thermal/omap4-thermal.c
@@ -0,0 +1,72 @@
+/*
+ * SPEAr thermal driver.
+ *
+ * Copyright (C) 2011-2012 Texas Instruments Inc.
+ * Contact:
+ * Eduardo Valentin <eduardo.valentin@xxxxxx>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/thermal.h>
+
+#include "omap-bandgap.h"
+
+struct omap4_thermal_data {
+ struct thermal_zone_device *omap4_thermal;
+ struct omap_bandgap *bg_ptr;
+ int sensor_id;
+};
+
+static inline int omap4_thermal_get_temp(struct thermal_zone_device *thermal,
+ unsigned long *temp)
+{
+ struct omap4_thermal_data *data = thermal->devdata;
+ int ret, tmp;
+
+ ret = omap_bandgap_read_temperature(data->bg_ptr, data->sensor_id,
+ &tmp);
+ if (!ret)
+ *temp = tmp;
+
+ return ret;
+}
+
+static struct thermal_zone_device_ops omap4_thermal_ops = {
+ .get_temp = omap4_thermal_get_temp,
+};
+
+int omap4_thermal_expose_sensor(struct omap_bandgap *bg_ptr, int id,
+ char *domain)
+{
+ struct omap4_thermal_data *data;
+
+ data = devm_kzalloc(bg_ptr->dev, sizeof(*data), GFP_KERNEL);
+ if (!data) {
+ dev_err(bg_ptr->dev, "kzalloc fail\n");
+ return -ENOMEM;
+ }
+ data->sensor_id = id;
+ data->bg_ptr = bg_ptr;
+ data->omap4_thermal = thermal_zone_device_register(domain, 0,
+ data, &omap4_thermal_ops, 0, 0, 0, 0);
+ if (IS_ERR(data->omap4_thermal)) {
+ dev_err(bg_ptr->dev, "thermal zone device is NULL\n");
+ return PTR_ERR(data->omap4_thermal);
+ }
+
+ return 0;
+}
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
