Clean all #ifdef's added to OMAP4 clock code to make it COMMON clk
ready, now that CONFIG_COMMON_CLK is enabled.
Signed-off-by: Rajendra Nayak <rnayak@xxxxxx>
---
arch/arm/mach-omap2/clkt_clksel.c | 204 ---------------------
arch/arm/mach-omap2/clkt_dpll.c | 50 -----
arch/arm/mach-omap2/clkt_iclk.c | 46 -----
arch/arm/mach-omap2/clock.c | 300 -------------------------------
arch/arm/mach-omap2/clock.h | 45 -----
arch/arm/mach-omap2/clock_common_data.c | 7 +-
arch/arm/mach-omap2/dpll3xxx.c | 212 +---------------------
arch/arm/mach-omap2/dpll44xx.c | 33 ----
arch/arm/mach-omap2/io.c | 18 --
9 files changed, 3 insertions(+), 912 deletions(-)
diff --git a/arch/arm/mach-omap2/clkt_clksel.c b/arch/arm/mach-omap2/clkt_clksel.c
index c99222a..c8b0e9b 100644
--- a/arch/arm/mach-omap2/clkt_clksel.c
+++ b/arch/arm/mach-omap2/clkt_clksel.c
@@ -41,11 +41,7 @@
#include <linux/kernel.h>
#include <linux/errno.h>
-#ifdef CONFIG_COMMON_CLK
#include <linux/clk-provider.h>
-#else
-#include <linux/clk.h>
-#endif
#include <linux/io.h>
#include <linux/bug.h>
@@ -64,11 +60,7 @@
* the element associated with the supplied parent clock address.
* Returns a pointer to the struct clksel on success or NULL on error.
*/
-#ifdef CONFIG_COMMON_CLK
static const struct clksel *_get_clksel_by_parent(struct clk_hw_omap *clk,
-#else
-static const struct clksel *_get_clksel_by_parent(struct clk *clk,
-#endif
struct clk *src_clk)
{
const struct clksel *clks;
@@ -85,11 +77,7 @@ static const struct clksel *_get_clksel_by_parent(struct clk *clk,
WARN(1, "clock: Could not find parent clock %s in clksel array "
"of clock %s\n",
__clk_get_name(src_clk),
-#ifdef CONFIG_COMMON_CLK
__clk_get_name(clk->hw.clk));
-#else
- __clk_get_name(clk));
-#endif
return NULL;
}
@@ -97,66 +85,6 @@ static const struct clksel *_get_clksel_by_parent(struct clk *clk,
}
/**
- * _get_div_and_fieldval() - find the new clksel divisor and field value to use
- * @src_clk: planned new parent struct clk *
- * @clk: struct clk * that is being reparented
- * @field_val: pointer to a u32 to contain the register data for the divisor
- *
- * Given an intended new parent struct clk * @src_clk, and the struct
- * clk * @clk to the clock that is being reparented, find the
- * appropriate rate divisor for the new clock (returned as the return
- * value), and the corresponding register bitfield data to program to
- * reach that divisor (returned in the u32 pointed to by @field_val).
- * Returns 0 on error, or returns the newly-selected divisor upon
- * success (in this latter case, the corresponding register bitfield
- * value is passed back in the variable pointed to by @field_val)
- */
-#ifndef CONFIG_COMMON_CLK
-static u8 _get_div_and_fieldval(struct clk *src_clk, struct clk *clk,
- u32 *field_val)
-{
- const struct clksel *clks;
- const struct clksel_rate *clkr, *max_clkr = NULL;
- u8 max_div = 0;
-
- clks = _get_clksel_by_parent(clk, src_clk);
- if (!clks)
- return 0;
-
- /*
- * Find the highest divisor (e.g., the one resulting in the
- * lowest rate) to use as the default. This should avoid
- * clock rates that are too high for the device. XXX A better
- * solution here would be to try to determine if there is a
- * divisor matching the original clock rate before the parent
- * switch, and if it cannot be found, to fall back to the
- * highest divisor.
- */
- for (clkr = clks->rates; clkr->div; clkr++) {
- if (!(clkr->flags & cpu_mask))
- continue;
-
- if (clkr->div > max_div) {
- max_div = clkr->div;
- max_clkr = clkr;
- }
- }
-
- if (max_div == 0) {
- /* This indicates an error in the clksel data */
- WARN(1, "clock: Could not find divisor for clock %s parent %s"
- "\n", __clk_get_name(clk),
- __clk_get_name(__clk_get_parent(src_clk)));
- return 0;
- }
-
- *field_val = max_clkr->val;
-
- return max_div;
-}
-#endif
-
-/**
* _write_clksel_reg() - program a clock's clksel register in hardware
* @clk: struct clk * to program
* @v: clksel bitfield value to program (with LSB at bit 0)
@@ -169,11 +97,7 @@ static u8 _get_div_and_fieldval(struct clk *src_clk, struct clk *clk,
* take into account any time the hardware might take to switch the
* clock source.
*/
-#ifdef CONFIG_COMMON_CLK
static void _write_clksel_reg(struct clk_hw_omap *clk, u32 field_val)
-#else
-static void _write_clksel_reg(struct clk *clk, u32 field_val)
-#endif
{
u32 v;
@@ -196,21 +120,13 @@ static void _write_clksel_reg(struct clk *clk, u32 field_val)
* before calling. Returns 0 on error or returns the actual integer divisor
* upon success.
*/
-#ifdef CONFIG_COMMON_CLK
static u32 _clksel_to_divisor(struct clk_hw_omap *clk, u32 field_val)
-#else
-static u32 _clksel_to_divisor(struct clk *clk, u32 field_val)
-#endif
{
const struct clksel *clks;
const struct clksel_rate *clkr;
struct clk *parent;
-#ifdef CONFIG_COMMON_CLK
parent = __clk_get_parent(clk->hw.clk);
-#else
- parent = __clk_get_parent(clk);
-#endif
clks = _get_clksel_by_parent(clk, parent);
if (!clks)
@@ -228,11 +144,7 @@ static u32 _clksel_to_divisor(struct clk *clk, u32 field_val)
/* This indicates a data error */
WARN(1, "clock: Could not find fieldval %d for clock %s parent "
"%s\n", field_val,
-#ifdef CONFIG_COMMON_CLK
__clk_get_name(clk->hw.clk),
-#else
- __clk_get_name(clk),
-#endif
__clk_get_name(parent));
return 0;
}
@@ -250,11 +162,7 @@ static u32 _clksel_to_divisor(struct clk *clk, u32 field_val)
* register field value _before_ left-shifting (i.e., LSB is at bit
* 0); or returns 0xFFFFFFFF (~0) upon error.
*/
-#ifdef CONFIG_COMMON_CLK
static u32 _divisor_to_clksel(struct clk_hw_omap *clk, u32 div)
-#else
-static u32 _divisor_to_clksel(struct clk *clk, u32 div)
-#endif
{
const struct clksel *clks;
const struct clksel_rate *clkr;
@@ -263,11 +171,7 @@ static u32 _divisor_to_clksel(struct clk *clk, u32 div)
/* should never happen */
WARN_ON(div == 0);
-#ifdef CONFIG_COMMON_CLK
parent = __clk_get_parent(clk->hw.clk);
-#else
- parent = __clk_get_parent(clk);
-#endif
clks = _get_clksel_by_parent(clk, parent);
if (!clks)
return ~0;
@@ -283,11 +187,7 @@ static u32 _divisor_to_clksel(struct clk *clk, u32 div)
if (!clkr->div) {
pr_err("clock: Could not find divisor %d for clock %s parent "
"%s\n", div,
-#ifdef CONFIG_COMMON_CLK
__clk_get_name(clk->hw.clk),
-#else
- __clk_get_name(clk),
-#endif
__clk_get_name(parent));
return ~0;
}
@@ -303,11 +203,7 @@ static u32 _divisor_to_clksel(struct clk *clk, u32 div)
* into the hardware, convert it into the actual divisor value, and
* return it; or return 0 on error.
*/
-#ifdef CONFIG_COMMON_CLK
static u32 _read_divisor(struct clk_hw_omap *clk)
-#else
-static u32 _read_divisor(struct clk *clk)
-#endif
{
u32 v;
@@ -335,12 +231,8 @@ static u32 _read_divisor(struct clk *clk)
*
* Returns the rounded clock rate or returns 0xffffffff on error.
*/
-#ifdef CONFIG_COMMON_CLK
u32 omap2_clksel_round_rate_div(struct clk_hw_omap *clk,
unsigned long target_rate,
-#else
-u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate,
-#endif
u32 *new_div)
{
unsigned long test_rate;
@@ -351,13 +243,8 @@ u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate,
unsigned long parent_rate;
const char *clk_name;
-#ifdef CONFIG_COMMON_CLK
parent = __clk_get_parent(clk->hw.clk);
clk_name = __clk_get_name(clk->hw.clk);
-#else
- parent = __clk_get_parent(clk);
- clk_name = __clk_get_name(clk);
-#endif
parent_rate = __clk_get_rate(parent);
if (!clk->clksel || !clk->clksel_mask)
@@ -418,14 +305,9 @@ u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate,
* to. Update @clk's .parent field with the appropriate clk ptr. No
* return value.
*/
-#ifdef CONFIG_COMMON_CLK
u8 omap2_init_clksel_parent(struct clk_hw *hw)
{
struct clk_hw_omap *clk = to_clk_hw_omap(hw);
-#else
-void omap2_init_clksel_parent(struct clk *clk)
-{
-#endif
const struct clksel *clks;
const struct clksel_rate *clkr;
u32 r, found = 0;
@@ -433,17 +315,10 @@ void omap2_init_clksel_parent(struct clk *clk)
const char *clk_name;
if (!clk->clksel || !clk->clksel_mask)
-#ifdef CONFIG_COMMON_CLK
return -EINVAL;
parent = __clk_get_parent(hw->clk);
clk_name = __clk_get_name(hw->clk);
-#else
- return;
-
- parent = __clk_get_parent(clk);
- clk_name = __clk_get_name(clk);
-#endif
r = __raw_readl(clk->clksel_reg) & clk->clksel_mask;
r >>= __ffs(clk->clksel_mask);
@@ -462,14 +337,8 @@ void omap2_init_clksel_parent(struct clk *clk)
((parent) ?
__clk_get_name(parent) :
"NULL"));
-#ifdef CONFIG_COMMON_CLK
};
return r;
-#else
- clk_reparent(clk, clks->parent);
- };
- found = 1;
-#endif
}
}
}
@@ -478,11 +347,7 @@ void omap2_init_clksel_parent(struct clk *clk)
WARN(!found, "clock: %s: init parent: could not find regval %0x\n",
clk_name, r);
-#ifdef CONFIG_COMMON_CLK
return -ENODEV;
-#else
- return;
-#endif
}
/**
@@ -494,7 +359,6 @@ void omap2_init_clksel_parent(struct clk *clk)
* function. Returns the clock's current rate, based on its parent's rate
* and its current divisor setting in the hardware.
*/
-#ifdef CONFIG_COMMON_CLK
unsigned long omap2_clksel_recalc(struct clk_hw *hw, unsigned long parent_rate)
{
unsigned long rate;
@@ -515,27 +379,6 @@ unsigned long omap2_clksel_recalc(struct clk_hw *hw, unsigned long parent_rate)
return rate;
}
-#else
-unsigned long omap2_clksel_recalc(struct clk *clk)
-{
- unsigned long rate;
- u32 div = 0;
- struct clk *parent;
-
- div = _read_divisor(clk);
- if (div == 0)
- return __clk_get_rate(clk);
-
- parent = __clk_get_parent(clk);
- rate = __clk_get_rate(parent) / div;
-
- pr_debug("clock: %s: recalc'd rate is %ld (div %d)\n",
- __clk_get_name(clk),
- rate, div);
-
- return rate;
-}
-#endif
/**
* omap2_clksel_round_rate() - find rounded rate for the given clock and rate
@@ -548,15 +391,10 @@ unsigned long omap2_clksel_recalc(struct clk *clk)
*
* Returns the rounded clock rate or returns 0xffffffff on error.
*/
-#ifdef CONFIG_COMMON_CLK
long omap2_clksel_round_rate(struct clk_hw *hw, unsigned long target_rate,
unsigned long *parent_rate)
{
struct clk_hw_omap *clk = to_clk_hw_omap(hw);
-#else
-long omap2_clksel_round_rate(struct clk *clk, unsigned long target_rate)
-{
-#endif
u32 new_div;
return omap2_clksel_round_rate_div(clk, target_rate, &new_div);
@@ -577,15 +415,10 @@ long omap2_clksel_round_rate(struct clk *clk, unsigned long target_rate)
* is changed, they will all be affected without any notification.
* Returns -EINVAL upon error, or 0 upon success.
*/
-#ifdef CONFIG_COMMON_CLK
int omap2_clksel_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
struct clk_hw_omap *clk = to_clk_hw_omap(hw);
-#else
-int omap2_clksel_set_rate(struct clk *clk, unsigned long rate)
-{
-#endif
u32 field_val, validrate, new_div = 0;
if (!clk->clksel || !clk->clksel_mask)
@@ -602,15 +435,8 @@ int omap2_clksel_set_rate(struct clk *clk, unsigned long rate)
_write_clksel_reg(clk, field_val);
pr_debug("clock: %s: set rate to %ld\n",
-#ifdef CONFIG_COMMON_CLK
__clk_get_name(hw->clk),
__clk_get_rate(hw->clk));
-#else
- __clk_get_name(clk),
- __clk_get_rate(clk));
-
- clk->rate = __clk_get_rate(__clk_get_parent(clk)) / new_div;
-#endif
return 0;
}
@@ -634,7 +460,6 @@ int omap2_clksel_set_rate(struct clk *clk, unsigned long rate)
* affected without any notification. Returns -EINVAL upon error, or
* 0 upon success.
*/
-#ifdef CONFIG_COMMON_CLK
int omap2_clksel_set_parent(struct clk_hw *hw, u8 field_val)
{
struct clk_hw_omap *clk = to_clk_hw_omap(hw);
@@ -645,32 +470,3 @@ int omap2_clksel_set_parent(struct clk_hw *hw, u8 field_val)
_write_clksel_reg(clk, field_val);
return 0;
}
-#else
-int omap2_clksel_set_parent(struct clk *clk, struct clk *new_parent)
-{
- u32 field_val = 0;
- u32 parent_div;
-
- if (!clk->clksel || !clk->clksel_mask)
- return -EINVAL;
-
- parent_div = _get_div_and_fieldval(new_parent, clk, &field_val);
- if (!parent_div)
- return -EINVAL;
- _write_clksel_reg(clk, field_val);
-
- clk_reparent(clk, new_parent);
-
- /* CLKSEL clocks follow their parents' rates, divided by a divisor */
- clk->rate = __clk_get_rate(new_parent);
-
- if (parent_div > 0)
- __clk_get_rate(clk) /= parent_div;
- pr_debug("clock: %s: set parent to %s (new rate %ld)\n",
- __clk_get_name(clk),
- __clk_get_name(__clk_get_parent(clk)),
- __clk_get_rate(clk));
-
- return 0;
-}
-#endif
diff --git a/arch/arm/mach-omap2/clkt_dpll.c b/arch/arm/mach-omap2/clkt_dpll.c
index e84512f..da0cafe 100644
--- a/arch/arm/mach-omap2/clkt_dpll.c
+++ b/arch/arm/mach-omap2/clkt_dpll.c
@@ -16,11 +16,7 @@
#include <linux/kernel.h>
#include <linux/errno.h>
-#ifdef CONFIG_COMMON_CLK
#include <linux/clk-provider.h>
-#else
-#include <linux/clk.h>
-#endif
#include <linux/io.h>
#include <asm/div64.h>
@@ -82,11 +78,7 @@
* (assuming that it is counting N upwards), or -2 if the enclosing loop
* should skip to the next iteration (again assuming N is increasing).
*/
-#ifdef CONFIG_COMMON_CLK
static int _dpll_test_fint(struct clk_hw_omap *clk, u8 n)
-#else
-static int _dpll_test_fint(struct clk *clk, u8 n)
-#endif
{
struct dpll_data *dd;
long fint, fint_min, fint_max;
@@ -95,11 +87,7 @@ static int _dpll_test_fint(struct clk *clk, u8 n)
dd = clk->dpll_data;
/* DPLL divider must result in a valid jitter correction val */
-#ifdef CONFIG_COMMON_CLK
fint = __clk_get_rate(__clk_get_parent(clk->hw.clk)) / n;
-#else
- fint = __clk_get_rate(__clk_get_parent(clk)) / n;
-#endif
if (cpu_is_omap24xx()) {
/* Should not be called for OMAP2, so warn if it is called */
@@ -200,24 +188,15 @@ static int _dpll_test_mult(int *m, int n, unsigned long *new_rate,
}
/* Public functions */
-#ifdef CONFIG_COMMON_CLK
u8 omap2_init_dpll_parent(struct clk_hw *hw)
{
struct clk_hw_omap *clk = to_clk_hw_omap(hw);
-#else
-void omap2_init_dpll_parent(struct clk *clk)
-{
-#endif
u32 v;
struct dpll_data *dd;
dd = clk->dpll_data;
if (!dd)
-#ifdef CONFIG_COMMON_CLK
return -EINVAL;
-#else
- return;
-#endif
v = __raw_readl(dd->control_reg);
v &= dd->enable_mask;
@@ -227,34 +206,18 @@ void omap2_init_dpll_parent(struct clk *clk)
if (cpu_is_omap24xx()) {
if (v == OMAP2XXX_EN_DPLL_LPBYPASS ||
v == OMAP2XXX_EN_DPLL_FRBYPASS)
-#ifdef CONFIG_COMMON_CLK
return 1;
-#else
- clk_reparent(clk, dd->clk_bypass);
-#endif
} else if (cpu_is_omap34xx()) {
if (v == OMAP3XXX_EN_DPLL_LPBYPASS ||
v == OMAP3XXX_EN_DPLL_FRBYPASS)
-#ifdef CONFIG_COMMON_CLK
return 1;
-#else
- clk_reparent(clk, dd->clk_bypass);
-#endif
} else if (cpu_is_omap44xx()) {
if (v == OMAP4XXX_EN_DPLL_LPBYPASS ||
v == OMAP4XXX_EN_DPLL_FRBYPASS ||
v == OMAP4XXX_EN_DPLL_MNBYPASS)
-#ifdef CONFIG_COMMON_CLK
return 1;
-#else
- clk_reparent(clk, dd->clk_bypass);
-#endif
}
-#ifdef CONFIG_COMMON_CLK
return 0;
-#else
- return;
-#endif
}
/**
@@ -271,11 +234,7 @@ void omap2_init_dpll_parent(struct clk *clk)
* locked, or the appropriate bypass rate if the DPLL is bypassed, or 0
* if the clock @clk is not a DPLL.
*/
-#ifdef CONFIG_COMMON_CLK
unsigned long omap2_get_dpll_rate(struct clk_hw_omap *clk)
-#else
-u32 omap2_get_dpll_rate(struct clk *clk)
-#endif
{
long long dpll_clk;
u32 dpll_mult, dpll_div, v;
@@ -331,15 +290,10 @@ u32 omap2_get_dpll_rate(struct clk *clk)
* (expensive) function again. Returns ~0 if the target rate cannot
* be rounded, or the rounded rate upon success.
*/
-#ifdef CONFIG_COMMON_CLK
long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate,
unsigned long *parent_rate)
{
struct clk_hw_omap *clk = to_clk_hw_omap(hw);
-#else
-long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate)
-{
-#endif
int m, n, r, scaled_max_m;
unsigned long scaled_rt_rp;
unsigned long new_rate = 0;
@@ -353,11 +307,7 @@ long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate)
dd = clk->dpll_data;
ref_rate = __clk_get_rate(dd->clk_ref);
-#ifdef CONFIG_COMMON_CLK
clk_name = __clk_get_name(hw->clk);
-#else
- clk_name = __clk_get_name(clk);
-#endif
pr_debug("clock: %s: starting DPLL round_rate, target rate %ld\n",
clk_name, target_rate);
diff --git a/arch/arm/mach-omap2/clkt_iclk.c b/arch/arm/mach-omap2/clkt_iclk.c
index b3aa8d3..ddea4bb 100644
--- a/arch/arm/mach-omap2/clkt_iclk.c
+++ b/arch/arm/mach-omap2/clkt_iclk.c
@@ -11,11 +11,7 @@
#undef DEBUG
#include <linux/kernel.h>
-#ifdef CONFIG_COMMON_CLK
#include <linux/clk-provider.h>
-#else
-#include <linux/clk.h>
-#endif
#include <linux/io.h>
#include <plat/clock.h>
@@ -29,11 +25,7 @@
/* Private functions */
/* XXX */
-#ifdef CONFIG_COMMON_CLK
void omap2_clkt_iclk_allow_idle(struct clk_hw_omap *clk)
-#else
-void omap2_clkt_iclk_allow_idle(struct clk *clk)
-#endif
{
u32 v, r;
@@ -45,11 +37,7 @@ void omap2_clkt_iclk_allow_idle(struct clk *clk)
}
/* XXX */
-#ifdef CONFIG_COMMON_CLK
void omap2_clkt_iclk_deny_idle(struct clk_hw_omap *clk)
-#else
-void omap2_clkt_iclk_deny_idle(struct clk *clk)
-#endif
{
u32 v, r;
@@ -60,42 +48,8 @@ void omap2_clkt_iclk_deny_idle(struct clk *clk)
__raw_writel(v, (__force void __iomem *)r);
}
-#ifdef CONFIG_COMMON_CLK
const struct clk_hw_omap_ops clkhwops_iclk = {
.allow_idle = omap2_clkt_iclk_allow_idle,
.deny_idle = omap2_clkt_iclk_deny_idle,
};
-#else
-/* Public data */
-
-const struct clkops clkops_omap2_iclk_dflt_wait = {
- .enable = omap2_dflt_clk_enable,
- .disable = omap2_dflt_clk_disable,
- .find_companion = omap2_clk_dflt_find_companion,
- .find_idlest = omap2_clk_dflt_find_idlest,
- .allow_idle = omap2_clkt_iclk_allow_idle,
- .deny_idle = omap2_clkt_iclk_deny_idle,
-};
-
-const struct clkops clkops_omap2_iclk_dflt = {
- .enable = omap2_dflt_clk_enable,
- .disable = omap2_dflt_clk_disable,
- .allow_idle = omap2_clkt_iclk_allow_idle,
- .deny_idle = omap2_clkt_iclk_deny_idle,
-};
-
-const struct clkops clkops_omap2_iclk_idle_only = {
- .allow_idle = omap2_clkt_iclk_allow_idle,
- .deny_idle = omap2_clkt_iclk_deny_idle,
-};
-
-const struct clkops clkops_omap2_mdmclk_dflt_wait = {
- .enable = omap2_dflt_clk_enable,
- .disable = omap2_dflt_clk_disable,
- .find_companion = omap2_clk_dflt_find_companion,
- .find_idlest = omap2_clk_dflt_find_idlest,
- .allow_idle = omap2_clkt_iclk_allow_idle,
- .deny_idle = omap2_clkt_iclk_deny_idle,
-};
-#endif
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 859f3c9..9008249 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -19,11 +19,7 @@
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/delay.h>
-#ifdef CONFIG_COMMON_CLK
#include <linux/clk-provider.h>
-#else
-#include <linux/clk.h>
-#endif
#include <linux/io.h>
#include <linux/bitops.h>
#include <trace/events/power.h>
@@ -49,7 +45,6 @@ u16 cpu_mask;
*/
static bool clkdm_control = true;
-#ifdef CONFIG_COMMON_CLK
LIST_HEAD(clk_hw_omap_clocks);
/*
@@ -72,7 +67,6 @@ unsigned long omap_fixed_divisor_recalc(struct clk_hw *hw,
return parent_rate / oclk->fixed_div;
}
-#endif
/*
* OMAP2+ specific clock functions
@@ -90,11 +84,7 @@ unsigned long omap_fixed_divisor_recalc(struct clk_hw *hw,
* belong in the clock code and will be moved in the medium term to
* module-dependent code. No return value.
*/
-#ifdef CONFIG_COMMON_CLK
static void _omap2_module_wait_ready(struct clk_hw_omap *clk)
-#else
-static void _omap2_module_wait_ready(struct clk *clk)
-#endif
{
void __iomem *companion_reg, *idlest_reg;
u8 other_bit, idlest_bit, idlest_val;
@@ -108,11 +98,7 @@ static void _omap2_module_wait_ready(struct clk *clk)
clk->ops->find_idlest(clk, &idlest_reg, &idlest_bit, &idlest_val);
omap2_cm_wait_idlest(idlest_reg, (1 << idlest_bit), idlest_val,
-#ifdef CONFIG_COMMON_CLK
__clk_get_name(clk->hw.clk));
-#else
- __clk_get_name(clk));
-#endif
}
/* Public functions */
@@ -125,25 +111,16 @@ static void _omap2_module_wait_ready(struct clk *clk)
* clockdomain pointer, and save it into the struct clk. Intended to be
* called during clk_register(). No return value.
*/
-#ifdef CONFIG_COMMON_CLK
void omap2_init_clk_clkdm(struct clk_hw *hw)
{
struct clk_hw_omap *clk = to_clk_hw_omap(hw);
-#else
-void omap2_init_clk_clkdm(struct clk *clk)
-{
-#endif
struct clockdomain *clkdm;
const char *clk_name;
if (!clk->clkdm_name)
return;
-#ifdef CONFIG_COMMON_CLK
clk_name = __clk_get_name(hw->clk);
-#else
- clk_name = __clk_get_name(clk);
-#endif
clkdm = clkdm_lookup(clk->clkdm_name);
if (clkdm) {
@@ -190,11 +167,7 @@ void __init omap2_clk_disable_clkdm_control(void)
* associate this type of code with per-module data structures to
* avoid this issue, and remove the casts. No return value.
*/
-#ifdef CONFIG_COMMON_CLK
void omap2_clk_dflt_find_companion(struct clk_hw_omap *clk,
-#else
-void omap2_clk_dflt_find_companion(struct clk *clk,
-#endif
void __iomem **other_reg, u8 *other_bit)
{
u32 r;
@@ -223,11 +196,7 @@ void omap2_clk_dflt_find_companion(struct clk *clk,
* register address ID (e.g., that CM_FCLKEN2 corresponds to
* CM_IDLEST2). This is not true for all modules. No return value.
*/
-#ifdef CONFIG_COMMON_CLK
void omap2_clk_dflt_find_idlest(struct clk_hw_omap *clk,
-#else
-void omap2_clk_dflt_find_idlest(struct clk *clk,
-#endif
void __iomem **idlest_reg, u8 *idlest_bit, u8 *idlest_val)
{
u32 r;
@@ -250,7 +219,6 @@ void omap2_clk_dflt_find_idlest(struct clk *clk,
}
-#ifdef CONFIG_COMMON_CLK
int omap2_dflt_clk_enable(struct clk_hw *hw)
{
struct clk_hw_omap *clk;
@@ -418,258 +386,6 @@ const struct clk_hw_omap_ops clkhwops_wait = {
.find_idlest = omap2_clk_dflt_find_idlest,
.find_companion = omap2_clk_dflt_find_companion,
};
-#else
-int omap2_dflt_clk_enable(struct clk *clk)
-{
- u32 v;
-
- if (unlikely(clk->enable_reg == NULL)) {
- pr_err("clock.c: Enable for %s without enable code\n",
- clk->name);
- return 0; /* REVISIT: -EINVAL */
- }
-
- v = __raw_readl(clk->enable_reg);
- if (clk->flags & INVERT_ENABLE)
- v &= ~(1 << clk->enable_bit);
- else
- v |= (1 << clk->enable_bit);
- __raw_writel(v, clk->enable_reg);
- v = __raw_readl(clk->enable_reg); /* OCP barrier */
-
- if (clk->ops->find_idlest)
- _omap2_module_wait_ready(clk);
-
- return 0;
-}
-
-void omap2_dflt_clk_disable(struct clk *clk)
-{
- u32 v;
-
- if (!clk->enable_reg) {
- /*
- * 'Independent' here refers to a clock which is not
- * controlled by its parent.
- */
- printk(KERN_ERR "clock: clk_disable called on independent "
- "clock %s which has no enable_reg\n", clk->name);
- return;
- }
-
- v = __raw_readl(clk->enable_reg);
- if (clk->flags & INVERT_ENABLE)
- v |= (1 << clk->enable_bit);
- else
- v &= ~(1 << clk->enable_bit);
- __raw_writel(v, clk->enable_reg);
- /* No OCP barrier needed here since it is a disable operation */
-}
-
-const struct clkops clkops_omap2_dflt_wait = {
- .enable = omap2_dflt_clk_enable,
- .disable = omap2_dflt_clk_disable,
- .find_companion = omap2_clk_dflt_find_companion,
- .find_idlest = omap2_clk_dflt_find_idlest,
-};
-
-const struct clkops clkops_omap2_dflt = {
- .enable = omap2_dflt_clk_enable,
- .disable = omap2_dflt_clk_disable,
-};
-
-/**
- * omap2_clk_disable - disable a clock, if the system is not using it
- * @clk: struct clk * to disable
- *
- * Decrements the usecount on struct clk @clk. If there are no users
- * left, call the clkops-specific clock disable function to disable it
- * in hardware. If the clock is part of a clockdomain (which they all
- * should be), request that the clockdomain be disabled. (It too has
- * a usecount, and so will not be disabled in the hardware until it no
- * longer has any users.) If the clock has a parent clock (most of
- * them do), then call ourselves, recursing on the parent clock. This
- * can cause an entire branch of the clock tree to be powered off by
- * simply disabling one clock. Intended to be called with the clockfw_lock
- * spinlock held. No return value.
- */
-void omap2_clk_disable(struct clk *clk)
-{
- if (clk->usecount == 0) {
- WARN(1, "clock: %s: omap2_clk_disable() called, but usecount "
- "already 0?", clk->name);
- return;
- }
-
- pr_debug("clock: %s: decrementing usecount\n", clk->name);
-
- clk->usecount--;
-
- if (clk->usecount > 0)
- return;
-
- pr_debug("clock: %s: disabling in hardware\n", clk->name);
-
- if (clk->ops && clk->ops->disable) {
- trace_clock_disable(clk->name, 0, smp_processor_id());
- clk->ops->disable(clk);
- }
-
- if (clkdm_control && clk->clkdm)
- clkdm_clk_disable(clk->clkdm, clk);
-
- if (clk->parent)
- omap2_clk_disable(clk->parent);
-}
-
-/**
- * omap2_clk_enable - request that the system enable a clock
- * @clk: struct clk * to enable
- *
- * Increments the usecount on struct clk @clk. If there were no users
- * previously, then recurse up the clock tree, enabling all of the
- * clock's parents and all of the parent clockdomains, and finally,
- * enabling @clk's clockdomain, and @clk itself. Intended to be
- * called with the clockfw_lock spinlock held. Returns 0 upon success
- * or a negative error code upon failure.
- */
-int omap2_clk_enable(struct clk *clk)
-{
- int ret;
-
- pr_debug("clock: %s: incrementing usecount\n", clk->name);
-
- clk->usecount++;
-
- if (clk->usecount > 1)
- return 0;
-
- pr_debug("clock: %s: enabling in hardware\n", clk->name);
-
- if (clk->parent) {
- ret = omap2_clk_enable(clk->parent);
- if (ret) {
- WARN(1, "clock: %s: could not enable parent %s: %d\n",
- clk->name, clk->parent->name, ret);
- goto oce_err1;
- }
- }
-
- if (clkdm_control && clk->clkdm) {
- ret = clkdm_clk_enable(clk->clkdm, clk);
- if (ret) {
- WARN(1, "clock: %s: could not enable clockdomain %s: "
- "%d\n", clk->name, clk->clkdm->name, ret);
- goto oce_err2;
- }
- }
-
- if (clk->ops && clk->ops->enable) {
- trace_clock_enable(clk->name, 1, smp_processor_id());
- ret = clk->ops->enable(clk);
- if (ret) {
- WARN(1, "clock: %s: could not enable: %d\n",
- clk->name, ret);
- goto oce_err3;
- }
- }
-
- return 0;
-
-oce_err3:
- if (clkdm_control && clk->clkdm)
- clkdm_clk_disable(clk->clkdm, clk);
-oce_err2:
- if (clk->parent)
- omap2_clk_disable(clk->parent);
-oce_err1:
- clk->usecount--;
-
- return ret;
-}
-
-/* Given a clock and a rate apply a clock specific rounding function */
-long omap2_clk_round_rate(struct clk *clk, unsigned long rate)
-{
- if (clk->round_rate)
- return clk->round_rate(clk, rate);
-
- return clk->rate;
-}
-
-/* Set the clock rate for a clock source */
-int omap2_clk_set_rate(struct clk *clk, unsigned long rate)
-{
- int ret = -EINVAL;
-
- pr_debug("clock: set_rate for clock %s to rate %ld\n", clk->name, rate);
-
- /* dpll_ck, core_ck, virt_prcm_set; plus all clksel clocks */
- if (clk->set_rate) {
- trace_clock_set_rate(clk->name, rate, smp_processor_id());
- ret = clk->set_rate(clk, rate);
- }
-
- return ret;
-}
-
-int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent)
-{
- if (!clk->clksel)
- return -EINVAL;
-
- if (clk->parent == new_parent)
- return 0;
-
- return omap2_clksel_set_parent(clk, new_parent);
-}
-
-/* OMAP3/4 non-CORE DPLL clkops */
-
-#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
-
-const struct clkops clkops_omap3_noncore_dpll_ops = {
- .enable = omap3_noncore_dpll_enable,
- .disable = omap3_noncore_dpll_disable,
- .allow_idle = omap3_dpll_allow_idle,
- .deny_idle = omap3_dpll_deny_idle,
-};
-
-const struct clkops clkops_omap3_core_dpll_ops = {
- .allow_idle = omap3_dpll_allow_idle,
- .deny_idle = omap3_dpll_deny_idle,
-};
-
-#endif
-
-/*
- * OMAP2+ clock reset and init functions
- */
-
-#ifdef CONFIG_OMAP_RESET_CLOCKS
-void omap2_clk_disable_unused(struct clk *clk)
-{
- u32 regval32, v;
-
- v = (clk->flags & INVERT_ENABLE) ? (1 << clk->enable_bit) : 0;
-
- regval32 = __raw_readl(clk->enable_reg);
- if ((regval32 & (1 << clk->enable_bit)) == v)
- return;
-
- pr_debug("Disabling unused clock \"%s\"\n", clk->name);
- if (cpu_is_omap34xx()) {
- omap2_clk_enable(clk);
- omap2_clk_disable(clk);
- } else {
- clk->ops->disable(clk);
- }
- if (clk->clkdm != NULL)
- pwrdm_state_switch(clk->clkdm->pwrdm.ptr);
-}
-#endif
-
-#endif /* CONFIG_COMMON_CLK */
/**
* omap2_clk_switch_mpurate_at_boot - switch ARM MPU rate by boot-time argument
@@ -707,10 +423,6 @@ int __init omap2_clk_switch_mpurate_at_boot(const char *mpurate_ck_name)
}
calibrate_delay();
-#ifndef CONFIG_COMMON_CLK
- recalculate_root_clocks();
-#endif
-
clk_put(mpurate_ck);
return 0;
@@ -756,15 +468,3 @@ void __init omap2_clk_print_new_rates(const char *hfclkin_ck_name,
(clk_get_rate(core_ck) / 1000000),
(clk_get_rate(mpu_ck) / 1000000));
}
-
-#ifndef CONFIG_COMMON_CLK
-/* Common data */
-struct clk_functions omap2_clk_functions = {
- .clk_enable = omap2_clk_enable,
- .clk_disable = omap2_clk_disable,
- .clk_round_rate = omap2_clk_round_rate,
- .clk_set_rate = omap2_clk_set_rate,
- .clk_set_parent = omap2_clk_set_parent,
- .clk_disable_unused = omap2_clk_disable_unused,
-};
-#endif
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index e0d572c..af9ac25 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -54,7 +54,6 @@ void omap2_clk_disable(struct clk *clk);
long omap2_clk_round_rate(struct clk *clk, unsigned long rate);
int omap2_clk_set_rate(struct clk *clk, unsigned long rate);
int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent);
-#ifdef CONFIG_COMMON_CLK
long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate,
unsigned long *parent_rate);
unsigned long omap3_dpll_recalc(struct clk_hw *hw, unsigned long parent_rate);
@@ -73,37 +72,16 @@ unsigned long omap4_dpll_regm4xen_recalc(struct clk_hw *hw,
unsigned long parent_rate);
long omap4_dpll_regm4xen_round_rate(struct clk_hw *hw, unsigned long target_rate,
unsigned long *parent_rate);
-#else
-long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate);
-unsigned long omap3_dpll_recalc(struct clk *clk);
-unsigned long omap3_clkoutx2_recalc(struct clk *clk);
-void omap3_dpll_allow_idle(struct clk *clk);
-void omap3_dpll_deny_idle(struct clk *clk);
-u32 omap3_dpll_autoidle_read(struct clk *clk);
-int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate);
-int omap3_noncore_dpll_enable(struct clk *clk);
-void omap3_noncore_dpll_disable(struct clk *clk);
-int omap4_dpllmx_gatectrl_read(struct clk *clk);
-void omap4_dpllmx_allow_gatectrl(struct clk *clk);
-void omap4_dpllmx_deny_gatectrl(struct clk *clk);
-long omap4_dpll_regm4xen_round_rate(struct clk *clk, unsigned long target_rate);
-unsigned long omap4_dpll_regm4xen_recalc(struct clk *clk);
-#endif
#ifdef CONFIG_OMAP_RESET_CLOCKS
void omap2_clk_disable_unused(struct clk *clk);
#else
#define omap2_clk_disable_unused NULL
#endif
-#ifdef CONFIG_COMMON_CLK
void omap2_init_clk_clkdm(struct clk_hw *clk);
-#else
-void omap2_init_clk_clkdm(struct clk *clk);
-#endif
void __init omap2_clk_disable_clkdm_control(void);
/* clkt_clksel.c public functions */
-#ifdef CONFIG_COMMON_CLK
u32 omap2_clksel_round_rate_div(struct clk_hw_omap *clk, unsigned long target_rate,
u32 *new_div);
u8 omap2_init_clksel_parent(struct clk_hw *hw);
@@ -113,15 +91,6 @@ long omap2_clksel_round_rate(struct clk_hw *hw, unsigned long target_rate,
int omap2_clksel_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate);
int omap2_clksel_set_parent(struct clk_hw *hw, u8 field_val);
-#else
-u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate,
- u32 *new_div);
-void omap2_init_clksel_parent(struct clk *clk);
-unsigned long omap2_clksel_recalc(struct clk *clk);
-long omap2_clksel_round_rate(struct clk *clk, unsigned long target_rate);
-int omap2_clksel_set_rate(struct clk *clk, unsigned long rate);
-int omap2_clksel_set_parent(struct clk *clk, struct clk *new_parent);
-#endif
/* clkt_iclk.c public functions */
#ifdef CONFIG_COMMON_CLK
@@ -132,13 +101,8 @@ extern void omap2_clkt_iclk_allow_idle(struct clk *clk);
extern void omap2_clkt_iclk_deny_idle(struct clk *clk);
#endif
-#ifdef CONFIG_COMMON_CLK
u8 omap2_init_dpll_parent(struct clk_hw *hw);
unsigned long omap2_get_dpll_rate(struct clk_hw_omap *clk);
-#else
-u32 omap2_get_dpll_rate(struct clk *clk);
-void omap2_init_dpll_parent(struct clk *clk);
-#endif
int omap2_wait_clock_ready(void __iomem *reg, u32 cval, const char *name);
@@ -167,7 +131,6 @@ static inline void omap4_clk_prepare_for_reboot(void)
}
#endif
-#ifdef CONFIG_COMMON_CLK
int omap2_dflt_clk_enable(struct clk_hw *hw);
void omap2_dflt_clk_disable(struct clk_hw *hw);
int omap2_dflt_clk_is_enabled(struct clk_hw *hw);
@@ -179,14 +142,6 @@ void omap2_init_clk_hw_omap_clocks(struct clk *clk);
int omap2_clk_enable_autoidle_all(void);
int omap2_clk_disable_autoidle_all(void);
void omap2_clk_enable_init_clocks(const char **clk_names, u8 num_clocks);
-#else
-int omap2_dflt_clk_enable(struct clk *clk);
-void omap2_dflt_clk_disable(struct clk *clk);
-void omap2_clk_dflt_find_companion(struct clk *clk, void __iomem **other_reg,
- u8 *other_bit);
-void omap2_clk_dflt_find_idlest(struct clk *clk, void __iomem **idlest_reg,
- u8 *idlest_bit, u8 *idlest_val);
-#endif
int omap2_clk_switch_mpurate_at_boot(const char *mpurate_ck_name);
void omap2_clk_print_new_rates(const char *hfclkin_ck_name,
const char *core_ck_name,
diff --git a/arch/arm/mach-omap2/clock_common_data.c b/arch/arm/mach-omap2/clock_common_data.c
index 5838c99..022df5f 100644
--- a/arch/arm/mach-omap2/clock_common_data.c
+++ b/arch/arm/mach-omap2/clock_common_data.c
@@ -16,6 +16,7 @@
* OMAP3xxx clock definition files.
*/
+#include <linux/clk-private.h>
#include "clock.h"
/* clksel_rate data common to 24xx/343x */
@@ -44,10 +45,6 @@ const struct clksel_rate dsp_ick_rates[] = {
{ .div = 0 },
};
-#ifdef CONFIG_COMMON_CLK
-
-#include <linux/clk-private.h>
-
static struct clk_ops dummy_ck_ops = {};
struct clk dummy_ck = {
@@ -55,5 +52,3 @@ struct clk dummy_ck = {
.ops = &dummy_ck_ops,
.flags = CLK_IS_BASIC,
};
-
-#endif
diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c
index d6b2d39..ee18d00 100644
--- a/arch/arm/mach-omap2/dpll3xxx.c
+++ b/arch/arm/mach-omap2/dpll3xxx.c
@@ -44,11 +44,7 @@
/* Private functions */
/* _omap3_dpll_write_clken - write clken_bits arg to a DPLL's enable bits */
-#ifdef CONFIG_COMMON_CLK
static void _omap3_dpll_write_clken(struct clk_hw_omap *clk, u8 clken_bits)
-#else
-static void _omap3_dpll_write_clken(struct clk *clk, u8 clken_bits)
-#endif
{
const struct dpll_data *dd;
u32 v;
@@ -62,11 +58,7 @@ static void _omap3_dpll_write_clken(struct clk *clk, u8 clken_bits)
}
/* _omap3_wait_dpll_status: wait for a DPLL to enter a specific state */
-#ifdef CONFIG_COMMON_CLK
static int _omap3_wait_dpll_status(struct clk_hw_omap *clk, u8 state)
-#else
-static int _omap3_wait_dpll_status(struct clk *clk, u8 state)
-#endif
{
const struct dpll_data *dd;
int i = 0;
@@ -74,11 +66,7 @@ static int _omap3_wait_dpll_status(struct clk *clk, u8 state)
const char *clk_name;
dd = clk->dpll_data;
-#ifdef CONFIG_COMMON_CLK
clk_name = __clk_get_name(clk->hw.clk);
-#else
- clk_name = __clk_get_name(clk);
-#endif
state <<= __ffs(dd->idlest_mask);
@@ -102,11 +90,7 @@ static int _omap3_wait_dpll_status(struct clk *clk, u8 state)
}
/* From 3430 TRM ES2 4.7.6.2 */
-#ifdef CONFIG_COMMON_CLK
static u16 _omap3_dpll_compute_freqsel(struct clk_hw_omap *clk, u8 n)
-#else
-static u16 _omap3_dpll_compute_freqsel(struct clk *clk, u8 n)
-#endif
{
unsigned long fint;
u16 f = 0;
@@ -151,20 +135,12 @@ static u16 _omap3_dpll_compute_freqsel(struct clk *clk, u8 n)
* locked successfully, return 0; if the DPLL did not lock in the time
* allotted, or DPLL3 was passed in, return -EINVAL.
*/
-#ifdef CONFIG_COMMON_CLK
static int _omap3_noncore_dpll_lock(struct clk_hw_omap *clk)
-#else
-static int _omap3_noncore_dpll_lock(struct clk *clk)
-#endif
{
u8 ai;
int r;
-#ifdef CONFIG_COMMON_CLK
pr_debug("clock: locking DPLL %s\n", __clk_get_name(clk->hw.clk));
-#else
- pr_debug("clock: locking DPLL %s\n", __clk_get_name(clk));
-#endif
ai = omap3_dpll_autoidle_read(clk);
@@ -194,11 +170,7 @@ static int _omap3_noncore_dpll_lock(struct clk *clk)
* DPLL3 was passed in, or the DPLL does not support low-power bypass,
* return -EINVAL.
*/
-#ifdef CONFIG_COMMON_CLK
static int _omap3_noncore_dpll_bypass(struct clk_hw_omap *clk)
-#else
-static int _omap3_noncore_dpll_bypass(struct clk *clk)
-#endif
{
int r;
u8 ai;
@@ -207,11 +179,7 @@ static int _omap3_noncore_dpll_bypass(struct clk *clk)
return -EINVAL;
pr_debug("clock: configuring DPLL %s for low-power bypass\n",
-#ifdef CONFIG_COMMON_CLK
__clk_get_name(clk->hw.clk));
-#else
- __clk_get_name(clk));
-#endif
ai = omap3_dpll_autoidle_read(clk);
@@ -234,22 +202,14 @@ static int _omap3_noncore_dpll_bypass(struct clk *clk)
* code. If DPLL3 was passed in, or the DPLL does not support
* low-power stop, return -EINVAL; otherwise, return 0.
*/
-#ifdef CONFIG_COMMON_CLK
static int _omap3_noncore_dpll_stop(struct clk_hw_omap *clk)
-#else
-static int _omap3_noncore_dpll_stop(struct clk *clk)
-#endif
{
u8 ai;
if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_STOP)))
return -EINVAL;
-#ifdef CONFIG_COMMON_CLK
pr_debug("clock: stopping DPLL %s\n", __clk_get_name(clk->hw.clk));
-#else
- pr_debug("clock: stopping DPLL %s\n", __clk_get_name(clk));
-#endif
ai = omap3_dpll_autoidle_read(clk);
@@ -273,19 +233,11 @@ static int _omap3_noncore_dpll_stop(struct clk *clk)
* XXX This code is not needed for 3430/AM35xx; can it be optimized
* out in non-multi-OMAP builds for those chips?
*/
-#ifdef CONFIG_COMMON_CLK
static void _lookup_dco(struct clk_hw_omap *clk, u8 *dco, u16 m, u8 n)
-#else
-static void _lookup_dco(struct clk *clk, u8 *dco, u16 m, u8 n)
-#endif
{
unsigned long fint, clkinp; /* watch out for overflow */
-#ifdef CONFIG_COMMON_CLK
clkinp = __clk_get_rate(__clk_get_parent(clk->hw.clk));
-#else
- clkinp = __clk_get_rate(__clk_get_parent(clk));
-#endif
fint = (clkinp / n) * m;
if (fint < 1000000000)
@@ -306,20 +258,12 @@ static void _lookup_dco(struct clk *clk, u8 *dco, u16 m, u8 n)
* XXX This code is not needed for 3430/AM35xx; can it be optimized
* out in non-multi-OMAP builds for those chips?
*/
-#ifdef CONFIG_COMMON_CLK
static void _lookup_sddiv(struct clk_hw_omap *clk, u8 *sd_div, u16 m, u8 n)
-#else
-static void _lookup_sddiv(struct clk *clk, u8 *sd_div, u16 m, u8 n)
-#endif
{
unsigned long clkinp, sd; /* watch out for overflow */
int mod1, mod2;
-#ifdef CONFIG_COMMON_CLK
clkinp = __clk_get_rate(__clk_get_parent(clk->hw.clk));
-#else
- clkinp = __clk_get_rate(__clk_get_parent(clk));
-#endif
/*
* target sigma-delta to near 250MHz
@@ -346,11 +290,7 @@ static void _lookup_sddiv(struct clk *clk, u8 *sd_div, u16 m, u8 n)
* Program the DPLL with the supplied M, N values, and wait for the DPLL to
* lock.. Returns -EINVAL upon error, or 0 upon success.
*/
-#ifdef CONFIG_COMMON_CLK
static int omap3_noncore_dpll_program(struct clk_hw_omap *clk, u16 m, u8 n, u16 freqsel)
-#else
-static int omap3_noncore_dpll_program(struct clk *clk, u16 m, u8 n, u16 freqsel)
-#endif
{
struct dpll_data *dd = clk->dpll_data;
u8 dco, sd_div;
@@ -407,14 +347,9 @@ static int omap3_noncore_dpll_program(struct clk *clk, u16 m, u8 n, u16 freqsel)
*
* Recalculate and propagate the DPLL rate.
*/
-#ifdef CONFIG_COMMON_CLK
unsigned long omap3_dpll_recalc(struct clk_hw *hw, unsigned long parent_rate)
{
struct clk_hw_omap *clk = to_clk_hw_omap(hw);
-#else
-unsigned long omap3_dpll_recalc(struct clk *clk)
-{
-#endif
return omap2_get_dpll_rate(clk);
}
@@ -434,14 +369,9 @@ unsigned long omap3_dpll_recalc(struct clk *clk)
* support low-power stop, or if the DPLL took too long to enter
* bypass or lock, return -EINVAL; otherwise, return 0.
*/
-#ifdef CONFIG_COMMON_CLK
int omap3_noncore_dpll_enable(struct clk_hw *hw)
{
struct clk_hw_omap *clk = to_clk_hw_omap(hw);
-#else
-int omap3_noncore_dpll_enable(struct clk *clk)
-{
-#endif
int r;
struct dpll_data *dd;
struct clk *parent;
@@ -450,15 +380,9 @@ int omap3_noncore_dpll_enable(struct clk *clk)
if (!dd)
return -EINVAL;
-#ifdef CONFIG_COMMON_CLK
parent = __clk_get_parent(hw->clk);
if (__clk_get_rate(hw->clk) == __clk_get_rate(dd->clk_bypass)) {
-#else
- parent = __clk_get_parent(clk);
-
- if (__clk_get_rate(clk) == __clk_get_rate(dd->clk_bypass)) {
-#endif
WARN_ON(parent != dd->clk_bypass);
r = _omap3_noncore_dpll_bypass(clk);
} else {
@@ -466,16 +390,6 @@ int omap3_noncore_dpll_enable(struct clk *clk)
r = _omap3_noncore_dpll_lock(clk);
}
-#ifndef CONFIG_COMMON_CLK
- /*
- *FIXME: this is dubious - if clk->rate has changed, what about
- * propagating?
- */
- if (!r)
- clk->rate = (clk->recalc) ? clk->recalc(clk) :
- omap2_get_dpll_rate(clk);
-#endif
-
return r;
}
@@ -486,14 +400,9 @@ int omap3_noncore_dpll_enable(struct clk *clk)
* Instructs a non-CORE DPLL to enter low-power stop. This function is
* intended for use in struct clkops. No return value.
*/
-#ifdef CONFIG_COMMON_CLK
void omap3_noncore_dpll_disable(struct clk_hw *hw)
{
struct clk_hw_omap *clk = to_clk_hw_omap(hw);
-#else
-void omap3_noncore_dpll_disable(struct clk *clk)
-{
-#endif
_omap3_noncore_dpll_stop(clk);
}
@@ -511,7 +420,6 @@ void omap3_noncore_dpll_disable(struct clk *clk)
* target rate if it hasn't been done already, then program and lock
* the DPLL. Returns -EINVAL upon error, or 0 upon success.
*/
-#ifdef CONFIG_COMMON_CLK
int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
@@ -581,84 +489,6 @@ int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate,
return 0;
}
-#else
-int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate)
-{
- struct clk *new_parent = NULL;
- unsigned long hw_rate;
- u16 freqsel = 0;
- struct dpll_data *dd;
- int ret;
-
- if (!clk || !rate)
- return -EINVAL;
-
- dd = clk->dpll_data;
- if (!dd)
- return -EINVAL;
-
- hw_rate = (clk->recalc) ? clk->recalc(clk) : omap2_get_dpll_rate(clk);
- if (rate == hw_rate)
- return 0;
-
- /*
- * Ensure both the bypass and ref clocks are enabled prior to
- * doing anything; we need the bypass clock running to reprogram
- * the DPLL.
- */
- omap2_clk_enable(dd->clk_bypass);
- omap2_clk_enable(dd->clk_ref);
-
- if (__clk_get_rate(dd->clk_bypass) == rate &&
- (clk->dpll_data->modes & (1 << DPLL_LOW_POWER_BYPASS))) {
- pr_debug("clock: %s: set rate: entering bypass.\n", clk->name);
-
- ret = _omap3_noncore_dpll_bypass(clk);
- if (!ret)
- new_parent = dd->clk_bypass;
- } else {
- if (dd->last_rounded_rate != rate)
- rate = clk->round_rate(clk, rate);
-
- if (dd->last_rounded_rate == 0)
- return -EINVAL;
-
- /* No freqsel on OMAP4 and OMAP3630 */
- if (!cpu_is_omap44xx() && !cpu_is_omap3630()) {
- freqsel = _omap3_dpll_compute_freqsel(clk,
- dd->last_rounded_n);
- if (!freqsel)
- WARN_ON(1);
- }
-
- pr_debug("clock: %s: set rate: locking rate to %lu.\n",
- __clk_get_name(clk), rate);
-
- ret = omap3_noncore_dpll_program(clk, dd->last_rounded_m,
- dd->last_rounded_n, freqsel);
- if (!ret)
- new_parent = dd->clk_ref;
- }
- if (!ret) {
- /*
- * Switch the parent clock in the hierarchy, and make sure
- * that the new parent's usecount is correct. Note: we
- * enable the new parent before disabling the old to avoid
- * any unnecessary hardware disable->enable transitions.
- */
- if (clk->usecount) {
- omap2_clk_enable(new_parent);
- omap2_clk_disable(clk->parent);
- }
- clk_reparent(clk, new_parent);
- clk->rate = rate;
- }
- omap2_clk_disable(dd->clk_ref);
- omap2_clk_disable(dd->clk_bypass);
-
- return 0;
-}
-#endif
/* DPLL autoidle read/set code */
@@ -670,11 +500,7 @@ int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate)
* -EINVAL if passed a null pointer or if the struct clk does not
* appear to refer to a DPLL.
*/
-#ifdef CONFIG_COMMON_CLK
u32 omap3_dpll_autoidle_read(struct clk_hw_omap *clk)
-#else
-u32 omap3_dpll_autoidle_read(struct clk *clk)
-#endif
{
const struct dpll_data *dd;
u32 v;
@@ -703,11 +529,7 @@ u32 omap3_dpll_autoidle_read(struct clk *clk)
* OMAP3430. The DPLL will enter low-power stop when its downstream
* clocks are gated. No return value.
*/
-#ifdef CONFIG_COMMON_CLK
void omap3_dpll_allow_idle(struct clk_hw_omap *clk)
-#else
-void omap3_dpll_allow_idle(struct clk *clk)
-#endif
{
const struct dpll_data *dd;
u32 v;
@@ -717,13 +539,8 @@ void omap3_dpll_allow_idle(struct clk *clk)
dd = clk->dpll_data;
- if (!dd->autoidle_reg) {
-#ifndef CONFIG_COMMON_CLK
- pr_debug("clock: DPLL %s: autoidle not supported\n",
- __clk_get_name(clk));
-#endif
+ if (!dd->autoidle_reg)
return;
- }
/*
* REVISIT: CORE DPLL can optionally enter low-power bypass
@@ -743,11 +560,7 @@ void omap3_dpll_allow_idle(struct clk *clk)
*
* Disable DPLL automatic idle control. No return value.
*/
-#ifdef CONFIG_COMMON_CLK
void omap3_dpll_deny_idle(struct clk_hw_omap *clk)
-#else
-void omap3_dpll_deny_idle(struct clk *clk)
-#endif
{
const struct dpll_data *dd;
u32 v;
@@ -757,13 +570,8 @@ void omap3_dpll_deny_idle(struct clk *clk)
dd = clk->dpll_data;
- if (!dd->autoidle_reg) {
-#ifndef CONFIG_COMMON_CLK
- pr_debug("clock: DPLL %s: autoidle not supported\n",
- __clk_get_name(clk));
-#endif
+ if (!dd->autoidle_reg)
return;
- }
v = __raw_readl(dd->autoidle_reg);
v &= ~dd->autoidle_mask;
@@ -781,7 +589,6 @@ void omap3_dpll_deny_idle(struct clk *clk)
* Using parent clock DPLL data, look up DPLL state. If locked, set our
* rate to the dpll_clk * 2; otherwise, just use dpll_clk.
*/
-#ifdef CONFIG_COMMON_CLK
unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw, unsigned long parent_rate)
{
const struct dpll_data *dd;
@@ -800,22 +607,7 @@ unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw, unsigned long parent_rate
break;
pclk = to_clk_hw_omap(hw);
} while (pclk && !pclk->dpll_data);
-#else
-unsigned long omap3_clkoutx2_recalc(struct clk *clk)
-{
- const struct dpll_data *dd;
- unsigned long rate;
- u32 v;
- struct clk *pclk;
- unsigned long parent_rate;
-
- /* Walk up the parents of clk, looking for a DPLL */
- pclk = __clk_get_parent(clk);
- while (pclk && !pclk->dpll_data)
- pclk = __clk_get_parent(pclk);
- parent_rate = __clk_get_rate(__clk_get_parent(clk));
-#endif
/* clk does not have a DPLL as a parent? */
WARN_ON(!pclk);
diff --git a/arch/arm/mach-omap2/dpll44xx.c b/arch/arm/mach-omap2/dpll44xx.c
index fbf94d2..0d0d076 100644
--- a/arch/arm/mach-omap2/dpll44xx.c
+++ b/arch/arm/mach-omap2/dpll44xx.c
@@ -23,11 +23,7 @@
#include "cm-regbits-44xx.h"
/* Supported only on OMAP4 */
-#ifdef CONFIG_COMMON_CLK
int omap4_dpllmx_gatectrl_read(struct clk_hw_omap *clk)
-#else
-int omap4_dpllmx_gatectrl_read(struct clk *clk)
-#endif
{
u32 v;
u32 mask;
@@ -46,11 +42,7 @@ int omap4_dpllmx_gatectrl_read(struct clk *clk)
return v;
}
-#ifdef CONFIG_COMMON_CLK
void omap4_dpllmx_allow_gatectrl(struct clk_hw_omap *clk)
-#else
-void omap4_dpllmx_allow_gatectrl(struct clk *clk)
-#endif
{
u32 v;
u32 mask;
@@ -68,11 +60,7 @@ void omap4_dpllmx_allow_gatectrl(struct clk *clk)
__raw_writel(v, clk->clksel_reg);
}
-#ifdef CONFIG_COMMON_CLK
void omap4_dpllmx_deny_gatectrl(struct clk_hw_omap *clk)
-#else
-void omap4_dpllmx_deny_gatectrl(struct clk *clk)
-#endif
{
u32 v;
u32 mask;
@@ -90,17 +78,10 @@ void omap4_dpllmx_deny_gatectrl(struct clk *clk)
__raw_writel(v, clk->clksel_reg);
}
-#ifdef CONFIG_COMMON_CLK
const struct clk_hw_omap_ops clkhwops_omap4_dpllmx = {
.allow_idle = omap4_dpllmx_allow_gatectrl,
.deny_idle = omap4_dpllmx_deny_gatectrl,
};
-#else
-const struct clkops clkops_omap4_dpllmx_ops = {
- .allow_idle = omap4_dpllmx_allow_gatectrl,
- .deny_idle = omap4_dpllmx_deny_gatectrl,
-};
-#endif
/**
* omap4_dpll_regm4xen_recalc - compute DPLL rate, considering REGM4XEN bit
@@ -111,15 +92,10 @@ const struct clkops clkops_omap4_dpllmx_ops = {
* OMAP4 ABE DPLL. Returns the DPLL's output rate (before M-dividers)
* upon success, or 0 upon error.
*/
-#ifdef CONFIG_COMMON_CLK
unsigned long omap4_dpll_regm4xen_recalc(struct clk_hw *hw,
unsigned long parent_rate)
{
struct clk_hw_omap *clk = to_clk_hw_omap(hw);
-#else
-unsigned long omap4_dpll_regm4xen_recalc(struct clk *clk)
-{
-#endif
u32 v;
unsigned long rate;
struct dpll_data *dd;
@@ -151,15 +127,10 @@ unsigned long omap4_dpll_regm4xen_recalc(struct clk *clk)
* M-dividers) upon success, -EINVAL if @clk is null or not a DPLL, or
* ~0 if an error occurred in omap2_dpll_round_rate().
*/
-#ifdef CONFIG_COMMON_CLK
long omap4_dpll_regm4xen_round_rate(struct clk_hw *hw, unsigned long target_rate,
unsigned long *parent_rate)
{
struct clk_hw_omap *clk = to_clk_hw_omap(hw);
-#else
-long omap4_dpll_regm4xen_round_rate(struct clk *clk, unsigned long target_rate)
-{
-#endif
u32 v;
struct dpll_data *dd;
long r;
@@ -175,11 +146,7 @@ long omap4_dpll_regm4xen_round_rate(struct clk *clk, unsigned long target_rate)
if (v)
target_rate = target_rate / OMAP4430_REGM4XEN_MULT;
-#ifdef CONFIG_COMMON_CLK
r = omap2_dpll_round_rate(hw, target_rate, NULL);
-#else
- r = omap2_dpll_round_rate(clk, target_rate);
-#endif
if (r == ~0)
return r;
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 43365df..fca244f 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -356,9 +356,7 @@ void __init omap2420_init_late(void)
omap_mux_late_init();
omap2_common_pm_late_init();
omap2_pm_init();
-#ifdef CONFIG_COMMON_CLK
omap2_clk_enable_autoidle_all();
-#endif
}
#endif
@@ -381,9 +379,7 @@ void __init omap2430_init_late(void)
omap_mux_late_init();
omap2_common_pm_late_init();
omap2_pm_init();
-#ifdef CONFIG_COMMON_CLK
omap2_clk_enable_autoidle_all();
-#endif
}
#endif
@@ -445,9 +441,7 @@ void __init omap3_init_late(void)
omap_mux_late_init();
omap2_common_pm_late_init();
omap3_pm_init();
-#ifdef CONFIG_COMMON_CLK
omap2_clk_enable_autoidle_all();
-#endif
}
void __init omap3430_init_late(void)
@@ -455,9 +449,7 @@ void __init omap3430_init_late(void)
omap_mux_late_init();
omap2_common_pm_late_init();
omap3_pm_init();
-#ifdef CONFIG_COMMON_CLK
omap2_clk_enable_autoidle_all();
-#endif
}
void __init omap35xx_init_late(void)
@@ -465,9 +457,7 @@ void __init omap35xx_init_late(void)
omap_mux_late_init();
omap2_common_pm_late_init();
omap3_pm_init();
-#ifdef CONFIG_COMMON_CLK
omap2_clk_enable_autoidle_all();
-#endif
}
void __init omap3630_init_late(void)
@@ -475,9 +465,7 @@ void __init omap3630_init_late(void)
omap_mux_late_init();
omap2_common_pm_late_init();
omap3_pm_init();
-#ifdef CONFIG_COMMON_CLK
omap2_clk_enable_autoidle_all();
-#endif
}
void __init am35xx_init_late(void)
@@ -485,9 +473,7 @@ void __init am35xx_init_late(void)
omap_mux_late_init();
omap2_common_pm_late_init();
omap3_pm_init();
-#ifdef CONFIG_COMMON_CLK
omap2_clk_enable_autoidle_all();
-#endif
}
void __init ti81xx_init_late(void)
@@ -495,9 +481,7 @@ void __init ti81xx_init_late(void)
omap_mux_late_init();
omap2_common_pm_late_init();
omap3_pm_init();
-#ifdef CONFIG_COMMON_CLK
omap2_clk_enable_autoidle_all();
-#endif
}
#endif
@@ -521,9 +505,7 @@ void __init omap4430_init_late(void)
omap_mux_late_init();
omap2_common_pm_late_init();
omap4_pm_init();
-#ifdef CONFIG_COMMON_CLK
omap2_clk_enable_autoidle_all();
-#endif
}
#endif
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
