Hi Afzal, On 06/11/2012 09:01 AM, Afzal Mohammed wrote: > Helper function for updating nand platform data has been > added the capability to take timing structure arguement. > Usage of omap_nand_flash_init() has been replaced by modifed > one, omap_nand_flash_init was doing things similar to > board_nand_init except that NAND CS# were being acquired > based on bootloader setting. As CS# is hardwired for a given > board, acquiring gpmc CS# has been removed, and updated with > the value on board. > > NAND CS# used in beagle board was found to be CS0. > Thomas Weber <thomas.weber.linux@xxxxxxxxxxxxxx> reported > that value of devkit8000 to be CS0. Overo board was found > to be using CS0 based on u-boot, while google grep says > omap3touchbook too has CS0. [1] also confirms the omap3-touchbook uses CS0. > Signed-off-by: Afzal Mohammed <afzal@xxxxxx> Which boards have been tested with this change? Otherwise, looks good. Reviewed-by: Jon Hunter <jon-hunter@xxxxxx> Cheers Jon [1] http://www.alwaysinnovating.com/wiki/index.php/Booting -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
