gpmc code has been converted to driver. Modify the board
code to provide gpmc driver with required information
Signed-off-by: Afzal Mohammed <afzal@xxxxxx>
---
arch/arm/mach-omap2/board-omap3beagle.c | 16 ++++++++++++++--
1 file changed, 14 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 5aa8f28..0fe70ed 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -77,6 +77,12 @@ enum {
static u8 omap3_beagle_version;
+static struct gpmc_device_pdata *gpmc_device_data[2];
+
+static struct gpmc_pdata gpmc_data = {
+ .device_pdata = gpmc_device_data,
+};
+
/*
* Board-specific configuration
* Defaults to BeagleBoard-xMC
@@ -499,6 +505,8 @@ static void __init beagle_opp_init(void)
static void __init omap3_beagle_init(void)
{
+ struct omap_nand_platform_data *nand_data;
+
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap3_beagle_init_rev();
@@ -524,9 +532,13 @@ static void __init omap3_beagle_init(void)
usb_musb_init(NULL);
usbhs_init(&usbhs_bdata);
- board_nand_init(omap3beagle_nand_partitions,
+ nand_data = board_nand_update(omap3beagle_nand_partitions,
ARRAY_SIZE(omap3beagle_nand_partitions), NAND_CS,
- NAND_BUSWIDTH_16, NULL);
+ NAND_BUSWIDTH_16, nand_default_timings);
+ *gpmc_device_data = gpmc_nand_update(nand_data);
+ if (!*gpmc_device_data)
+ pr_err("error: unable to initilaize gpmc nand\n");
+ omap_gpmc_init(&gpmc_data);
/* Ensure msecure is mux'd to be able to set the RTC. */
omap_mux_init_signal("sys_drm_msecure", OMAP_PIN_OFF_OUTPUT_HIGH);
--
1.7.10.2
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
