Configure busturnaround, cycle2cycledelay, waitmonitoringtime, clkactivationtime in gpmc_cs_set_timings(). This is done so that boards can configure these parameters of gpmc in Kernel instead of relying on bootloader. Signed-off-by: Afzal Mohammed <afzal@xxxxxx> --- arch/arm/mach-omap2/gpmc.c | 6 ++++++ arch/arm/plat-omap/include/plat/gpmc.h | 6 ++++++ 2 files changed, 12 insertions(+) diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 578fd4c..517953f 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -313,6 +313,12 @@ int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t) GPMC_SET_ONE(GPMC_CS_CONFIG5, 24, 27, page_burst_access); + GPMC_SET_ONE(GPMC_CS_CONFIG6, 0, 3, bus_turnaround); + GPMC_SET_ONE(GPMC_CS_CONFIG6, 8, 11, cycle2cycle_delay); + + GPMC_SET_ONE(GPMC_CS_CONFIG1, 18, 19, wait_monitoring); + GPMC_SET_ONE(GPMC_CS_CONFIG1, 25, 26, clk_activation); + if (cpu_is_omap34xx()) { GPMC_SET_ONE(GPMC_CS_CONFIG6, 16, 19, wr_data_mux_bus); GPMC_SET_ONE(GPMC_CS_CONFIG6, 24, 28, wr_access); diff --git a/arch/arm/plat-omap/include/plat/gpmc.h b/arch/arm/plat-omap/include/plat/gpmc.h index 2e6e259..802fb22 100644 --- a/arch/arm/plat-omap/include/plat/gpmc.h +++ b/arch/arm/plat-omap/include/plat/gpmc.h @@ -128,6 +128,12 @@ struct gpmc_timings { u16 rd_cycle; /* Total read cycle time */ u16 wr_cycle; /* Total write cycle time */ + u16 bus_turnaround; + u16 cycle2cycle_delay; + + u16 wait_monitoring; + u16 clk_activation; + /* The following are only on OMAP3430 */ u16 wr_access; /* WRACCESSTIME */ u16 wr_data_mux_bus; /* WRDATAONADMUXBUS */ -- 1.7.10.2 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html